2010 Archives by subject
Starting: Sat Jan 2 06:00:55 CET 2010
Ending: Fri Dec 24 10:42:31 CET 2010
Messages: 946
- [Gmsh] "O" hex mesh in gmsh?
Eric Nutsch
- [Gmsh] (no subject)
jean pierre aubry
- [Gmsh] (no subject)
Geordie McBain
- [Gmsh] (no subject)
Mohammed Mobtil
- [Gmsh] (no subject)
David Colignon
- [Gmsh] (no subject)
raffaele labarile
- [Gmsh] (no subject)
raffaele labarile
- [Gmsh] (no subject)
David Colignon
- [Gmsh] (no subject)
Elvin Verdiyev
- [Gmsh] (no subject)
David Colignon
- [Gmsh] (no subject)
Mikhail Artemiev
- [Gmsh] (no subject) (an answer)
jean pierre aubry
- [Gmsh] .msh file to .inp for abaqus analysis
Raghunath Sai Katragadda
- [Gmsh] .msh file to .inp for abaqus analysis
Christophe Geuzaine
- [Gmsh] 2D bitmap files to 3D mesh
Fred-Johan Pettersen
- [Gmsh] 2D bitmap files to 3D mesh
Fred-Johan Pettersen
- [Gmsh] 2D bitmap files to 3D mesh
Kubicek Bernhard
- [Gmsh] 2D bitmap files to 3D mesh
Robert Funnell
- [Gmsh] 2d circular sample mesh
Abushaikha, Ahmed
- [Gmsh] 2D plot
Marios Papadopoulos
- [Gmsh] 2D plot
Christophe Geuzaine
- [Gmsh] 2D plot
Marios Papadopoulos
- [Gmsh] 2d sturcture gird with triangles facing each other
Abushaikha, Ahmed
- [Gmsh] 2d sturcture gird with triangles facing each other
Christophe Geuzaine
- [Gmsh] 2d sturcture gird with triangles facing each other
Christophe Geuzaine
- [Gmsh] 3d mesh
Alexis Blasselle
- [Gmsh] 3d mesh
Ruth V. Sabariego
- [Gmsh] 3d mesh
Kubicek Bernhard
- [Gmsh] 3d mesh
Alexis Blasselle
- [Gmsh] 3D Mesh
Jose A. Abell M.
- [Gmsh] 3D meshing from stl surface fails
Alexander Opitz
- [Gmsh] 3D meshing from stl surface fails
David Colignon
- [Gmsh] 3D mesh using only points
Cristóbal Bertoglio B.
- [Gmsh] 3D mesh using only points
Christophe Geuzaine
- [Gmsh] 3D mesh using threshold
Stéphane BLANCHET
- [Gmsh] 3D mesh where volumes share part of a boundary
matthew suddards
- [Gmsh] 3D mesh where volumes share part of a boundary
Christophe Geuzaine
- [Gmsh] 3 levels of mesh refinement in a box
Olavo Luppi Silva
- [Gmsh] 3 levels of mesh refinement in a box
Eric Nutsch
- [Gmsh] 3 levels of mesh refinement in a box
Olavo Luppi Silva
- [Gmsh] 64 bit, stable release for linux request.
Mark Starnes
- [Gmsh] 64 bit, stable release for linux request.
Dmitrijs Ledkovs
- [Gmsh] 64 bit, stable release for linux request.
Mark Starnes
- [Gmsh] 64 bit, stable release for linux request.
Dmitrijs Ledkovs
- [Gmsh] 64 Bit version?
Rarata Z.
- [Gmsh] 64 Bit version?
Geordie McBain
- [Gmsh] 64 Bit version?
Dmitrijs Ledkovs
- [Gmsh] 64 Bit version?
Geordie McBain
- [Gmsh] 64 Bit version?
Geordie McBain
- [Gmsh] 64 bit version of executable
Danny Lathouwers - TNW
- [Gmsh] 64 bit version of executable
Mark Starnes
- [Gmsh] [Fwd: gmsh build on amd]
Umut Tabak
- [Gmsh] [Fwd: gmsh build on amd]
Jose Paulo Moitinho de Almeida
- [Gmsh] Abaqus INP export does not work correctly
杨成林
- [Gmsh] Abaqus INP export does not work correctly
Christophe Geuzaine
- [Gmsh] about .mesh file format
Felipe Montefuscolo
- [Gmsh] about .mesh file format
Geordie McBain
- [Gmsh] about .mesh file format
Felipe Montefuscolo
- [Gmsh] about .mesh file format
Geordie McBain
- [Gmsh] About generating a volume mesh
Samuele Zampini
- [Gmsh] About generating a volume mesh
David Colignon
- [Gmsh] About generating a volume mesh
Samuele Zampini
- [Gmsh] about mesh refinement by scripting
Giuseppe Zagari
- [Gmsh] about mesh refinement by scripting
David Colignon
- [Gmsh] about mesh refinement by scripting
Giuseppe Zagari
- [Gmsh] about mesh refinement by scripting
Giuseppe Zagari
- [Gmsh] about mesh refinement by scripting
David Colignon
- [Gmsh] about mesh refinement by scripting
Giuseppe Zagari
- [Gmsh] about mesh refinement by scripting
Mikhail Titov
- [Gmsh] a bug?
Sean Hardesty
- [Gmsh] a bug?
Christophe Geuzaine
- [Gmsh] Adaptive meshing with background mesh
Martin Vymazal
- [Gmsh] Adaptive meshing with background mesh
Martin Vymazal
- [Gmsh] Adaptive meshing with background mesh
Christophe Geuzaine
- [Gmsh] Adaptive visualization with hexahedra
Gonçalo Pena
- [Gmsh] add a local volume group in GMSH
zhaoguang wang
- [Gmsh] Addendum: Possible bug in CMakeLists.txt script?: Stack size not set to 16 MB and Win32icon.res not linked for MinGW builds
Trevor Strickler
- [Gmsh] Addendum: Possible bug in CMakeLists.txt script?: Stack size not set to 16 MB and Win32icon.res not linked for MinGW builds
Christophe Geuzaine
- [Gmsh] Addendum: Possible bug in CMakeLists.txt script?: Stack size not set to 16 MB and Win32icon.res not linked for MinGW builds
Christophe Geuzaine
- [Gmsh] Adding capability for multiple overlaps
James O'Beirne
- [Gmsh] Adding capability for multiple overlaps
David Colignon
- [Gmsh] Adding data to mesh
Dmitrijs Ledkovs
- [Gmsh] Airfoil meshing Naca 0012
Emanuele T.
- [Gmsh] Airfoil meshing Naca 0012
Emanuele T.
- [Gmsh] Airfoil meshing Naca 0012
Emanuele T.
- [Gmsh] Airfoil meshing Naca 0012
Eric Nutsch
- [Gmsh] Airfoil meshing Naca 0012
Emanuele T.
- [Gmsh] Airfoil meshing Naca 0012
Eric Nutsch
- [Gmsh] Airfoil meshing Naca 0012
Emanuele T.
- [Gmsh] all-hex unstructured meshes in 3D - possible?
Hugh Blackburn
- [Gmsh] all-hex unstructured meshes in 3D - possible?
Billy Araujo
- [Gmsh] All-quad unstructured 2D - possible?
Hugh Blackburn
- [Gmsh] All-quad unstructured 2D - possible?
Eric Nutsch
- [Gmsh] All-quad unstructured 2D - possible?
Hugh Blackburn
- [Gmsh] All-quad unstructured 2D - possible?
Umut Tabak
- [Gmsh] All-quad unstructured 2D - possible?
Christophe Geuzaine
- [Gmsh] a mesh problem
Umut Tabak
- [Gmsh] a mesh problem
Billy Araujo
- [Gmsh] Animation: moving particles along a vector
Iñaki Guerra Díaz
- [Gmsh] Animation: moving particles along a vector
Geordie McBain
- [Gmsh] Animations
bclr20 at bath.ac.uk
- [Gmsh] Animations
Geordie McBain
- [Gmsh] Anisotropy and refinement
Laurent Michel
- [Gmsh] Anisotropy and refinement
Christophe Geuzaine
- [Gmsh] A note from a user
Anab Akanda
- [Gmsh] another question
463575346
- [Gmsh] another question
463575346
- [Gmsh] another question
Geordie McBain
- [Gmsh] another question
Eric Nutsch
- [Gmsh] another question
Jin, Yao
- [Gmsh] A question about the output of 3D mesh
张知竹
- [Gmsh] A question of the delauny triangulation
yuuki takano
- [Gmsh] A question of the delauny triangulation
Jean-Francois Remacle
- [Gmsh] ask for help-From MQ univertity, Au
Yu Zhang
- [Gmsh] ask for help-From MQ univertity, Au
Geordie McBain
- [Gmsh] asking for information
salma souai
- [Gmsh] asking for information
David Colignon
- [Gmsh] ask some questions about partition mesh?
liang dong
- [Gmsh] assign physical entities to a mesh
Umut Tabak
- [Gmsh] assign physical entities to a mesh
Eric Nutsch
- [Gmsh] assign physical entities to a mesh
Christophe Geuzaine
- [Gmsh] assign physical entities to a mesh
Umut Tabak
- [Gmsh] background mesh (version 2.4.2)
Danny Lathouwers - TNW
- [Gmsh] background mesh (version 2.4.2)
Christophe Geuzaine
- [Gmsh] Background remeshing in 2D
Emilie Sauvage
- [Gmsh] Background remeshing in 2D
Ruth V. Sabariego
- [Gmsh] backprojection problem
Toni Uusimÿffffe4ki
- [Gmsh] binary doesn'run, source fail to compile
nfprovv1 at gmx.com
- [Gmsh] binary doesn'run, source fail to compile
Christophe Geuzaine
- [Gmsh] binary file format - fortran
Hossein Talebi
- [Gmsh] binary file format - fortran
David Colignon
- [Gmsh] binary file format - fortran
Christophe Geuzaine
- [Gmsh] biperiodic conditions on a 3D non-extrudable geometry
gdemesy at physics.utoronto.ca
- [Gmsh] biperiodic conditions on a 3D non-extrudable geometry
demesy
- [Gmsh] boundary help
Manan Patel
- [Gmsh] boundary help
Geordie McBain
- [Gmsh] Boundary layers in gmsh?
Eric Nutsch
- [Gmsh] Boundary layers in gmsh?
julien hoessler
- [Gmsh] Boundary layers in gmsh?
Christophe Geuzaine
- [Gmsh] Boundary layers in gmsh?
Eric Nutsch
- [Gmsh] Boundary layers in gmsh?
Eric Nutsch
- [Gmsh] Boundary layers in gmsh?
David Colignon
- [Gmsh] Boundary layers in gmsh?
David Colignon
- [Gmsh] Boundary triangle node ordering
gmsh at praveen.e4ward.com
- [Gmsh] bug
Juliana Amâncio Malagoni
- [Gmsh] bug
Kubicek Bernhard
- [Gmsh] BUG : geometrical tolerance in GUI & named .stp import
Hansen Michael
- [Gmsh] Bug in GMSH 2.0.8
zecarica
- [Gmsh] Bug in GMSH 2.0.8
David Colignon
- [Gmsh] Bug in gmsh saving dialog?
Martin Vymazal
- [Gmsh] Bug in gmsh saving dialog?
Christophe Geuzaine
- [Gmsh] bugs
Juliana Amâncio Malagoni
- [Gmsh] Bug with high-order adaptive visualization
Marc Duflot
- [Gmsh] Bug with high-order adaptive visualization
Christophe Geuzaine
- [Gmsh] Build the mesh in my own program
Mikhail Artemiev
- [Gmsh] Build the mesh in my own program
Mikhail Titov
- [Gmsh] Build the mesh in my own program
Mikhail Artemiev
- [Gmsh] Build the mesh in my own program
Mikhail Artemiev
- [Gmsh] Build the mesh in my own program
Christophe Geuzaine
- [Gmsh] Build the mesh in my own program
Mikhail Artemiev
- [Gmsh] Calculate principal stresses
Billy Araujo
- [Gmsh] Calculate principal stresses
Christophe Geuzaine
- [Gmsh] Calculation of eignevalues
Holger Schwaab
- [Gmsh] cgns: Segmentation fault
Dragan Vidovic
- [Gmsh] cgns: Segmentation fault
Mikhail Titov
- [Gmsh] cgns: Segmentation fault
David Colignon
- [Gmsh] cgns: Segmentation fault
Dragan Vidovic
- [Gmsh] cgns output support
simon place
- [Gmsh] cgns output support
simon place
- [Gmsh] cgns reader
Umut Tabak
- [Gmsh] change line color in a View
Wangshiraz
- [Gmsh] Change the order of mesh using non-interactive mode
Sang-Yeop Chung
- [Gmsh] Change the order of mesh using non-interactive mode
David Colignon
- [Gmsh] changing permanently from "3D arrow" to "Displacement"?
jean pierre aubry
- [Gmsh] characterics length (metrics) at each nodes?
trophime
- [Gmsh] characterics length (metrics) at each nodes?
Ruth V. Sabariego
- [Gmsh] characterics length (metrics) at each nodes?
Christophe Geuzaine
- [Gmsh] Choosing Mesh.RandomFactor
John_V
- [Gmsh] CMake and Blas
Daniel Soares
- [Gmsh] CMake and Blas
Christophe Geuzaine
- [Gmsh] CMake and Blas
Daniel Soares
- [Gmsh] Cmake didn't find the blas library!
Antonio Frasson
- [Gmsh] Cmake didn't find the blas library!
David Colignon
- [Gmsh] Colouring of elements according to `quality'.
Mark Starnes
- [Gmsh] Colouring of elements according to `quality'.
Jean-Francois Remacle
- [Gmsh] Colouring of elements according to `quality'.
Mark Starnes
- [Gmsh] Combine-1d_and_2d-Elements
Fernando Diego
- [Gmsh] Combine-1d_and_2d-Elements
Geordie McBain
- [Gmsh] Combine single facets to surface group OR multiple STL files (closed surface) merged to get 3D mesh
Meiner Auchmeiner
- [Gmsh] Combine single facets to surface group OR multiple STL files (closed surface) merged to get 3D mesh
Christophe Geuzaine
- [Gmsh] Combine single facets to surface group OR multiple STL files (closed surface) merged to get 3D mesh
Meiner Auchmeiner
- [Gmsh] combine two different msh-file in one window
?????? ???????
- [Gmsh] combine two different msh-file in one window
Mikhail Titov
- [Gmsh] combine two different msh-file in one window
?????? ???????
- [Gmsh] combine two different msh-file in one window
Christophe Geuzaine
- [Gmsh] combine two different msh-file in one window
?????? ???????
- [Gmsh] comments about tutorial files
Christophe Geuzaine
- [Gmsh] comments about tutorial files
Takuya OSHIMA
- [Gmsh] comments about tutorial files
Christophe Geuzaine
- [Gmsh] comments about tutorial files
Takuya OSHIMA
- [Gmsh] comments about tutorial files
Christophe Geuzaine
- [Gmsh] comments about tutorial files
Takuya OSHIMA
- [Gmsh] commercial use of gmsh (tetgen?)
jb.leydet
- [Gmsh] commercial use of gmsh (tetgen?)
David Colignon
- [Gmsh] commercial use of gmsh (tetgen?)
jb.leydet
- [Gmsh] Compilation of Gmsh2.5 fails with "Bad File Number"
Tibi Chelcea
- [Gmsh] Compile Gmsh with OpenCascade support
Martin Vymazal
- [Gmsh] Compile Gmsh with OpenCascade support
David Colignon
- [Gmsh] Compile Gmsh with OpenCascade support
Martin Vymazal
- [Gmsh] Compile Gmsh with OpenCascade support
David Colignon
- [Gmsh] Compiling gmsh on Ubuntu-9.10 (Missing limits.h)
Bjarne Børresen
- [Gmsh] Compiling gmsh on Ubuntu-9.10 (Missing limits.h)
Christophe Geuzaine
- [Gmsh] conicidentsNodeswithQuads
Fernando Diego
- [Gmsh] conicidentsNodeswithQuads
Christophe Geuzaine
- [Gmsh] ContactElements
Fernando Diego
- [Gmsh] ContactElements
Eric Nutsch
- [Gmsh] Converter
JOAQUIM VILÀ
- [Gmsh] Converter
Robert Funnell
- [Gmsh] Converter
Ted Kord
- [Gmsh] Converter
Christophe Geuzaine
- [Gmsh] Convert igs to stl
Fabian Braennstroem
- [Gmsh] Converting STL to 3D Mesh
Ted Kord
- [Gmsh] Converting STL to 3D Mesh
Geordie McBain
- [Gmsh] Converting STL to 3D Mesh
Ted Kord
- [Gmsh] Converting STL to 3D Mesh
Martin Vymazal
- [Gmsh] Coordinates of Nodes and Numbering of elements are wrong
Chen-Ket Chai
- [Gmsh] Coordinates of Nodes and Numbering of elements are wrong
Mikhail Titov
- [Gmsh] Coordinates of Nodes and Numbering of elements are wrong
Mikhail Titov
- [Gmsh] Could not generate display lists
Coppola, Gianfilippo
- [Gmsh] Could not generate display lists
David Colignon
- [Gmsh] create animations (movie) in GMSH
Cleiton Elsner da Fonseca
- [Gmsh] create animations (movie) in GMSH
Geordie McBain
- [Gmsh] create animations (movie) in GMSH
Christophe Geuzaine
- [Gmsh] Creating families and groups to be output in MED format
Pierre JUILLARD
- [Gmsh] Creating families and groups to be output in MED format
David Colignon
- [Gmsh] Creating field on a shell element group
Pierre JUILLARD
- [Gmsh] Creating field on a shell element group
David Colignon
- [Gmsh] creating indexed list within a loop
jean pierre aubry
- [Gmsh] creating indexed list within a loop
Christophe Geuzaine
- [Gmsh] Creating invalid 3d-mesh
Alexis Blasselle
- [Gmsh] Creating invalid 3d-mesh
Geordie McBain
- [Gmsh] Creating surface groups inside mesh file
D Haley
- [Gmsh] création de repères
Thibaut Chanvrier
- [Gmsh] Cyclic boundary condition (same mesh when extruding a surface ?)
Durufle marc
- [Gmsh] Cyclic boundary condition (same mesh when extruding a surface ?) (Durufle marc)
gdemesy at physics.utoronto.ca
- [Gmsh] Defective mesh file
Felix Salazar
- [Gmsh] Defective mesh file
Mikhail Titov
- [Gmsh] Defective mesh file
Geordie McBain
- [Gmsh] Define physical groups in CAD file
Wai Sam Wong
- [Gmsh] Define physical groups in CAD file
Zenker, Dr. Matthias
- [Gmsh] Define physical groups in CAD file
Hansen Michael
- [Gmsh] Define physical groups in CAD file
Zenker, Dr. Matthias
- [Gmsh] deformed finite elements
Marios Papadopoulos
- [Gmsh] deformed finite elements
Geordie McBain
- [Gmsh] deformed finite elements
Geordie McBain
- [Gmsh] demande d'aide
Khalid Aarif
- [Gmsh] Demande d'aide pour maillage avec GMSH
gaelle kervern
- [Gmsh] differenz between Linux-Version and Windows-Version
Krupp, Verena
- [Gmsh] differenz between Linux-Version and Windows-Version
Christophe Geuzaine
- [Gmsh] Distant visualization
Karin&NiKo
- [Gmsh] Dividing a Mesh into Different Regions/Subdomains
Ted Kord
- [Gmsh] Dmitrijs Ledkovs wants to stay in touch on LinkedIn
Dmitrijs Ledkovs
- [Gmsh] Does gmsh have a Min function?
Billy Araujo
- [Gmsh] Does gmsh have a Min function?
Christophe Geuzaine
- [Gmsh] Double surfaces after STEP import
Zenker, Dr. Matthias
- [Gmsh] Double surfaces after STEP import
Mark van Doesburg
- [Gmsh] Double surfaces after STEP import
Zenker, Dr. Matthias
- [Gmsh] doubt about structured mesh?
Jin, Yao
- [Gmsh] doubt about structured mesh?
Jin, Yao
- [Gmsh] doubts_about_gmsh
Ecila Asor
- [Gmsh] dump points definitions after a set of transformations
julien hoessler
- [Gmsh] Element re-numbering after export to MED
Roman
- [Gmsh] Element re-numbering after export to MED - cont...
Roman
- [Gmsh] elevation (Scalar warp) in 2D [was: x-y plots and elevation(Scalar warp) in 2D]
Geordie McBain
- [Gmsh] elevation (Scalar warp) in 2D [was: x-y plots and elevation(Scalar warp) in 2D]
Christophe Prud'homme
- [Gmsh] Ellipsoid
Carlo Bencivenni
- [Gmsh] Entity numbering in merged file
Martin Vymazal
- [Gmsh] Error: cannot tetrahedralize volume with quadrangles on boundary
Jinbiao XIONG
- [Gmsh] Error intersection volumes in 3D Gmsh
Juliana
- [Gmsh] Error intersection volumes in 3D Gmsh
David Colignon
- [Gmsh] Error intersection volumes in 3D Gmsh
Juliana
- [Gmsh] Error intersection volumes in 3D Gmsh
Ruth V. Sabariego
- [Gmsh] Error Remeshing STL to Generate QUADs/HEXAs
Ted Kord
- [Gmsh] Error Remeshing STL to Generate QUADs/HEXAs
David Colignon
- [Gmsh] Error Remeshing STL to Generate QUADs/HEXAs
Ted Kord
- [Gmsh] Error Remeshing STL to Generate QUADs/HEXAs
Jean-Francois Remacle
- [Gmsh] Error Remeshing STL to Generate QUADs/HEXAs
Ted Kord
- [Gmsh] Error with intersecting facets STL file in gmsh
Harsh Menon
- [Gmsh] Error with intersecting facets STL file in gmsh
David Colignon
- [Gmsh] Error with intersecting volume in gmsh
Juliana
- [Gmsh] Export .msh to .p3d
Vitor M. Braga
- [Gmsh] export in gmsh
alejandroalvarez at alumnos.uvigo.es
- [Gmsh] export in gmsh
Geordie McBain
- [Gmsh] export the figure
ZhouBin
- [Gmsh] export the figure
ZhouBin
- [Gmsh] Extract edges plugin
Billy Araujo
- [Gmsh] Extrusion along parametric curve : update ?
Zacharie De Grève
- [Gmsh] Extrusion and Rotation
Gabriel Beu Nogueira de Macedo
- [Gmsh] Extrusion and Rotation
David Colignon
- [Gmsh] extrusion of compound surfaces
julien hoessler
- [Gmsh] Extrusion with changing mesh size
D Haley
- [Gmsh] Extrusion with changing mesh size
David Colignon
- [Gmsh] failed to download gmsh from svn
trophime
- [Gmsh] failed to download gmsh from svn
Christophe Geuzaine
- [Gmsh] file format
oka
- [Gmsh] file format
Rui Maciel
- [Gmsh] file format
oka
- [Gmsh] file format
Rui Maciel
- [Gmsh] file format
Christophe Geuzaine
- [Gmsh] file format
Rui Maciel
- [Gmsh] freefem
Luis Casillas
- [Gmsh] freefem
Geordie McBain
- [Gmsh] freefem
Luis Casillas
- [Gmsh] freefem
Geordie McBain
- [Gmsh] freefem
Luis Casillas
- [Gmsh] freefem
Geordie McBain
- [Gmsh] Fwd: about .mesh file format
Felipe Montefuscolo
- [Gmsh] Fwd: about .mesh file format
Christophe Geuzaine
- [Gmsh] Fwd: Accepted gmsh 2.4.2.dfsg-3 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.4.2.dfsg-3 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.4.2.dfsg-6 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.5.0.dfsg-1 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.5.0~svn20100711-1 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.5.0~svn20100728-1 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.5.0~svn20100808-1 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.5.0~svn20100808-2 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Accepted gmsh 2.5.0~svn20100831.dfsg-1 (source amd64)
Christophe Prud'homme
- [Gmsh] Fwd: Bug#607875: gmsh: Segmentation fault when creating 3d mesh
Christophe Prud'homme
- [Gmsh] Fwd: iges coherence
Miklós Ecseri
- [Gmsh] Fwd: Khamsin, a Google Sketchup plugin for CFD modeling: version v0.2 available
Billy Araujo
- [Gmsh] Fwd: problems about mesh characteristic length
徐庶
- [Gmsh] Fwd: problems about mesh characteristic length
David Colignon
- [Gmsh] Fwd: problems about mesh characteristic length
Geordie McBain
- [Gmsh] Fwd: problems about mesh characteristic length
徐庶
- [Gmsh] Fwd: Re: 3D meshing from stl surface fails
Christophe Geuzaine
- [Gmsh] Fwd: Re: about mesh refinement by scripting
David Colignon
- [Gmsh] Fwd: Re: about mesh refinement by scripting
Mikhail Titov
- [Gmsh] Fwd: Re: Boundary layers in gmsh?
Christophe Geuzaine
- [Gmsh] Fwd: RE: Question regarding the restrict field
David Colignon
- [Gmsh] gcode save as
gary
- [Gmsh] generate unstructured mesh between indentic structured surface mesh of a non extrudable geometry
gdemesy at physics.utoronto.ca
- [Gmsh] generate unstructured mesh between indentic structured surface mesh of a non extrudable geometry
Christophe Geuzaine
- [Gmsh] generate unstructured mesh between indentic structured surface mesh of a non extrudable geometry
demesy
- [Gmsh] generate unstructured mesh between indentic structured surface mesh of a non extrudable geometry
gdemesy at physics.utoronto.ca
- [Gmsh] Generating QUADs/HEXAs mesh in GMSH
Pierre JUILLARD
- [Gmsh] Geometrical capability of Gmsh
Emanuele T.
- [Gmsh] Geometrical capability of Gmsh
David Colignon
- [Gmsh] Geometric scaling of STP files
Bill Milewski
- [Gmsh] Geometric scaling of STP files
Jean-Francois Remacle
- [Gmsh] Geometric scaling of STP files
Billy Araujo
- [Gmsh] Geometric scaling of STP files
Bill Milewski
- [Gmsh] Geometry error
Sang-Yeop Chung
- [Gmsh] Geometry error
David Colignon
- [Gmsh] Ghost Cells
James O'Beirne
- [Gmsh] Ghost Cells
Jean-Francois Remacle
- [Gmsh] Ghost Cells
Jonathan Lambrechts
- [Gmsh] Ghost Cells
oka
- [Gmsh] Ghost Cells
Christophe Geuzaine
- [Gmsh] Gmesh
Christopher Russ
- [Gmsh] Gmesh
Geordie McBain
- [Gmsh] gmesh thread-safe?
Mario Rodriguez
- [Gmsh] gmesh thread-safe?
Mario Rodriguez
- [Gmsh] gmesh thread-safe?
David Colignon
- [Gmsh] Gmsh
Marie-Claire Le Pape
- [Gmsh] Gmsh
Jean-Francois Remacle
- [Gmsh] Gmsh
Christophe Geuzaine
- [Gmsh] GMSH - Avoid one point lines
Hansen Michael
- [Gmsh] Gmsh - structured grid
shlomy shitrit
- [Gmsh] Gmsh - structured grid
Ruth V. Sabariego
- [Gmsh] gmsh: bundled libraries
Nico Schlömer
- [Gmsh] Gmsh: problem for ruled surface with BSPline
Regis Duvigneau
- [Gmsh] Gmsh: problem for ruled surface with BSPline
Ruth V. Sabariego
- [Gmsh] GMSH : Problem with mesh adapting.
Gaulier Pierre
- [Gmsh] gmsh : problem with ruled surfaces with BSplines
Regis Duvigneau
- [Gmsh] GMSH and buildings-wind interaction
Antonella Grassano
- [Gmsh] GMSH and buildings-wind interaction
Kubicek Bernhard
- [Gmsh] GMSH and buildings-wind interaction
Geordie McBain
- [Gmsh] gmsh and FreeFem
marco restelli
- [Gmsh] gmsh and FreeFem
Geordie McBain
- [Gmsh] gmsh and FreeFem
marco restelli
- [Gmsh] gmsh and FreeFem
Geordie McBain
- [Gmsh] Gmsh bug
Mikhail Artemiev
- [Gmsh] GMSH Bug, Font type does not change
Siemers, Michael
- [Gmsh] gmsh build cannot find blas/lapack
Jack Chessa
- [Gmsh] gmsh build on amd
Umut Tabak
- [Gmsh] gmsh crash when deleting points
vidar vidnes
- [Gmsh] gmsh datafile format
Dalton Harvie
- [Gmsh] gmsh datafile format
Geordie McBain
- [Gmsh] gmsh development
Vyacheslav Filyayev
- [Gmsh] gmsh development
Vyacheslav Filyayev
- [Gmsh] gmsh development
Geordie McBain
- [Gmsh] GMSH doesn't start
nfprovv1 at gmx.com
- [Gmsh] GMSH doesn't start
Christophe Geuzaine
- [Gmsh] gmsh errors when using frontal algorithm, or using optimize / optimize_netgen
Harsh Menon
- [Gmsh] gmsh errors when using frontal algorithm, or using optimize / optimize_netgen
Christophe Geuzaine
- [Gmsh] gmsh failes to construct 3D mesh from initial 2D surface mesh
Alexey Vasyukov
- [Gmsh] gmsh failes to construct 3D mesh from initial 2D surface mesh
Christophe Geuzaine
- [Gmsh] gmsh failes to construct 3D mesh from initial 2D surface mesh
Alexey Vasyukov
- [Gmsh] gmsh fails to create points inside a loop
jean pierre aubry
- [Gmsh] gmsh fails to create points inside a loop
Eric Nutsch
- [Gmsh] gmsh fails to create points inside a loop
jean pierre aubry
- [Gmsh] gmsh fails to create points inside a loop
David Colignon
- [Gmsh] GMSH for BOINC
Kuba Pietras
- [Gmsh] GMSH for BOINC
Dmitrijs Ledkovs
- [Gmsh] GMSH learning
463575346
- [Gmsh] gmsh request
Domenico Quaranta
- [Gmsh] gmsh request
David Colignon
- [Gmsh] gmsh segfaulting on simple file
Crni Gorac
- [Gmsh] gmsh segfaulting on simple file
Eric Nutsch
- [Gmsh] gmsh segfaulting on simple file
David Colignon
- [Gmsh] gmsh segfaulting on simple file
Crni Gorac
- [Gmsh] gmsh segfaulting on simple file
David Colignon
- [Gmsh] gmsh segfaulting on simple file
Crni Gorac
- [Gmsh] gmsh segfaulting on simple file
Crni Gorac
- [Gmsh] gmsh team may look at this quote from Code_Aster
jean pierre aubry
- [Gmsh] gmsh team may look at this quote from Code_Aster
Christophe Geuzaine
- [Gmsh] GSHHS Plugin clarification
Jonathan Lambrechts
- [Gmsh] GSHHS Plugin clarification
Clayton Hiles
- [Gmsh] gshhs plugin for GMSH
Clayton Hiles
- [Gmsh] Help
Marco Vocialta
- [Gmsh] Help
David Colignon
- [Gmsh] Help
Henri Pascal-Jenny
- [Gmsh] Help
Christophe Geuzaine
- [Gmsh] HELP
Tal Yehoshua
- [Gmsh] Help on "zero vertex is not on boundary of polymesh"
Wai Sam Wong
- [Gmsh] Help on creating quadrilateral shell elements
Lucas Fernando Cóser
- [Gmsh] help with hexahedra
Pierre MOUSSOU
- [Gmsh] help with hexahedra
Christophe Geuzaine
- [Gmsh] Hexahedral element
정상엽
- [Gmsh] Hexahedral element
David Colignon
- [Gmsh] high-order fe visualization
Giuseppe Zagari
- [Gmsh] high-order fe visualization
Giuseppe Zagari
- [Gmsh] Higher order quadrangular mesh.
Vijay S. Mahadevan
- [Gmsh] Higher order quadrangular mesh.
Christophe Geuzaine
- [Gmsh] Higher order quadrangular mesh.
Vijay S. Mahadevan
- [Gmsh] Higher order quadrangular mesh.
Vijay S. Mahadevan
- [Gmsh] Higher order quadrangular mesh.
Christophe Geuzaine
- [Gmsh] Higher order quadrangular mesh.
Vijay S. Mahadevan
- [Gmsh] How can i save 3d cells in .msh file?
Emanuele T.
- [Gmsh] How can i save 3d cells in .msh file?
Eric Nutsch
- [Gmsh] How to choose an element type in non-interactive mode
Wojciech Artichowicz
- [Gmsh] How to choose an element type in non-interactive mode
Umut Tabak
- [Gmsh] How to choose an element type in non-interactive mode
David Colignon
- [Gmsh] How to choose an element type in non-interactive mode
Wojciech Artichowicz
- [Gmsh] how to define surface properties in gmsh input files?
Crni Gorac
- [Gmsh] how to define surface properties in gmsh input files?
Ruth V. Sabariego
- [Gmsh] how to enable cgns support
Umut Tabak
- [Gmsh] how to enable cgns support
Christophe Geuzaine
- [Gmsh] How to group nodes
saville at nodai.net
- [Gmsh] How to group nodes
Mikhail Titov
- [Gmsh] How transforming elementary entities to physical groups?
Pierre JUILLARD
- [Gmsh] How transforming elementary entities to physical groups?
Konstantinos Poulios
- [Gmsh] How transforming elementary entities to physical groups?
Pierre JUILLARD
- [Gmsh] How transforming elementary entities to physical groups?
Konstantinos Poulios
- [Gmsh] How transforming elementary entities to physical groups?
Pierre JUILLARD
- [Gmsh] How transforming elementary entities to physical groups?
Konstantinos Poulios
- [Gmsh] How transforming elementary entities to physical groups?
Pierre JUILLARD
- [Gmsh] I'm sorry, the information contained on the site.
emilio at grucad.ufsc.br
- [Gmsh] icosahedral meshes of the sphere
Cotter, Colin J
- [Gmsh] iges coherence
Miklós Ecseri
- [Gmsh] import + meshing of step file
jb.leydet
- [Gmsh] import + meshing of step file
Geordie McBain
- [Gmsh] import + meshing of step file
Christophe Geuzaine
- [Gmsh] import + meshing of step file
jb.leydet
- [Gmsh] Import of VRML surface mesh
Uwe.Mittag at dlr.de
- [Gmsh] Import of VRML surface mesh
David Colignon
- [Gmsh] inconstant thickness
Paul CARRICO
- [Gmsh] Increment list with : operator
Olavo Luppi Silva
- [Gmsh] Increment list with : operator
Christophe Geuzaine
- [Gmsh] independent meshing of assembly parts
Steffè Walter
- [Gmsh] independent meshing of assembly parts
Christophe Geuzaine
- [Gmsh] independent meshing of assembly parts
Steffè Walter
- [Gmsh] Information
donato.stante at tiscali.it
- [Gmsh] information
Geordie McBain
- [Gmsh] information
David Colignon
- [Gmsh] Information
donato.stante at tiscali.it
- [Gmsh] Information - Gmsh - windows 7 64 bits
emilio at grucad.ufsc.br
- [Gmsh] install GMSH as library
ex07120 at qmul.ac.uk
- [Gmsh] Install GMSH on Fedora 13
Hansen Michael
- [Gmsh] interested in gmsh... is resolution control possible?
Michel Audette
- [Gmsh] Interfacing a boundary layer with a tetrahedral farfield.
Eric Nutsch
- [Gmsh] invert color map in multiple wiew
Umut Tabak
- [Gmsh] invert color map in multiple wiew
Christophe Geuzaine
- [Gmsh] invert color map in multiple wiew
Ruth V. Sabariego
- [Gmsh] invert color map in multiple wiew
Umut Tabak
- [Gmsh] ISAAC: .p3d grid
Vitor M. Braga
- [Gmsh] ISAAC: .p3d grid
Christophe Geuzaine
- [Gmsh] is SetName really implemented ,
jean pierre aubry
- [Gmsh] Joining two pipes
Martin Vymazal
- [Gmsh] Joining two pipes
David Colignon
- [Gmsh] Joining two pipes
Martin Vymazal
- [Gmsh] Joining two pipes
Geordie McBain
- [Gmsh] keeping entities in group after translation
jean pierre aubry
- [Gmsh] keeping entities in group after translation (self answer)
jean pierre aubry
- [Gmsh] keeping entities in group after translation (self answer)
Christophe Geuzaine
- [Gmsh] Khamsin: Google Sketchup + Gmsh + OpenFVM
Billy Araújo
- [Gmsh] lancer gmsh
Youen KERVELLA
- [Gmsh] lancer gmsh
Jin, Yao
- [Gmsh] List of list ?
Zacharie De Grève
- [Gmsh] List of list ?
David Colignon
- [Gmsh] Load structured field: problem with file format
Florian Wellmann
- [Gmsh] locally predefined mesh
Aron Wahlberg
- [Gmsh] local mesh refinement
orientation f
- [Gmsh] local mesh refinement
Geordie McBain
- [Gmsh] local mesh refinement
Geordie McBain
- [Gmsh] local mesh refinement
David Colignon
- [Gmsh] local mesh refinement
Christophe Geuzaine
- [Gmsh] Local referential for the hexahedron and prism element family
Rui Maciel
- [Gmsh] Local referential for the hexahedron and prism element family
Geordie McBain
- [Gmsh] Local referential for the hexahedron and prism element family
Rui Maciel
- [Gmsh] Local referential for the hexahedron and prism element family
Geordie McBain
- [Gmsh] Local referential for the hexahedron and prism element family
Rui Maciel
- [Gmsh] mailing list
Alexander Steenhoek - 3ME
- [Gmsh] mailing list
Christophe Geuzaine
- [Gmsh] maillage périodique
Benoit Nennig
- [Gmsh] maillage périodique
Jean-Francois Remacle
- [Gmsh] Maillage volumique a partir d'un maillage de peau
Xavier Ferrieres
- [Gmsh] Maillage volumique a partir d'un maillage de peau
David Colignon
- [Gmsh] Maximum/minimum of a view
Billy Araujo
- [Gmsh] Maybe a stupid question, but...
Alexis Blasselle
- [Gmsh] Maybe a stupid question, but...
David Colignon
- [Gmsh] Medit .mesh problem
Philippe Miron
- [Gmsh] Medit .mesh problem
Geordie McBain
- [Gmsh] Medit file format
Martin Vymazal
- [Gmsh] Medit file format
Geordie McBain
- [Gmsh] Medit file format
Martin Vymazal
- [Gmsh] Medit file format
Geordie McBain
- [Gmsh] Medit file format
Christophe Geuzaine
- [Gmsh] Medit file format
Geordie McBain
- [Gmsh] Medit file format
Geordie McBain
- [Gmsh] Medit file format
Christophe Geuzaine
- [Gmsh] Mesh-Error
Franz Langer
- [Gmsh] Mesh.MshFileVersion option in gmsh 2.5.0
Andriy Roshchenko
- [Gmsh] mesh a point inside a surface
jean pierre aubry
- [Gmsh] mesh a point inside a surface
David Colignon
- [Gmsh] mesh a point inside a surface
jean pierre aubry
- [Gmsh] mesh element -> physical group
krzysztof.pelczar at gmail.com
- [Gmsh] mesh element -> physical group
Christophe Geuzaine
- [Gmsh] Mesh exporting from Gmsh to Fluent
Oguz Emre
- [Gmsh] Mesh faces Intersecting
Raghunath Sai Katragadda
- [Gmsh] Mesh faces Intersecting
Ruth V. Sabariego
- [Gmsh] Mesh faces Intersecting
Raghunath Sai Katragadda
- [Gmsh] Mesh faces Intersecting
David Colignon
- [Gmsh] Mesh faces Intersecting
Christophe Geuzaine
- [Gmsh] mesh file converter
lazlo
- [Gmsh] mesh file converter
Geordie McBain
- [Gmsh] mesh file converter
lazlo
- [Gmsh] mesh file converter
jean pierre aubry
- [Gmsh] Mesh generation for a large and complex geometry
Mahdi Mohammadi
- [Gmsh] Meshing error
정상엽
- [Gmsh] Meshing error
David Colignon
- [Gmsh] meshing of spherical object
b_yendler at comcast.net
- [Gmsh] meshing of spherical object
b_yendler at comcast.net
- [Gmsh] Meshing PENDING surfaces when model contains boundary layer surfaces
Trevor Strickler
- [Gmsh] mesh name in .med file
jean pierre aubry
- [Gmsh] mesh name in .med file
Geordie McBain
- [Gmsh] mesh name in .med file
Geordie McBain
- [Gmsh] mesh name in .med file
Christophe Geuzaine
- [Gmsh] mesh partition
oka
- [Gmsh] Mesh quality for triangles
Stéphane Blanchet
- [Gmsh] mesh refinement
Laurent Michel
- [Gmsh] Mesh STL File with Quads Only
Ted Kord
- [Gmsh] Mesh STL File with Quads Only
Pierre JUILLARD
- [Gmsh] Mesh STL File with Quads Only
Ted Kord
- [Gmsh] Mesh STL File with Quads Only
Billy Araujo
- [Gmsh] Mesh visibility
Laurent Michel
- [Gmsh] Mesh visibility
jean pierre aubry
- [Gmsh] Mesh with many volumes - memory problem
Romain Quey
- [Gmsh] Mesh with many volumes - memory problem
Christophe Geuzaine
- [Gmsh] Mesh with many volumes - memory problem
Christophe Geuzaine
- [Gmsh] Mesh with quadrilaterals exclusively
Fernando Cosso
- [Gmsh] Metis in gmsh
Stephen Montgomery-Smith
- [Gmsh] Metis in gmsh
Christophe Geuzaine
- [Gmsh] Metis in gmsh
George Karypis
- [Gmsh] Midnodes with command line meshing from STP
Hansen Michael
- [Gmsh] Modifying color map using script.
Billy Araujo
- [Gmsh] Modifying color map using script.
Ruth V. Sabariego
- [Gmsh] Modifying color map using script.
Christophe Geuzaine
- [Gmsh] Modifying color map using script.
Billy Araujo
- [Gmsh] Modulef
Bui Hoa
- [Gmsh] MSH 2.0 format
Andrey Zakharov
- [Gmsh] Msh ASCII file format
Smith, Mark
- [Gmsh] Msh ASCII file format
Christophe Geuzaine
- [Gmsh] msh format
Marco Bajo
- [Gmsh] msh format
Mikhail Titov
- [Gmsh] Need to change line color in a View
Wangshiraz
- [Gmsh] Need to change line color in a View
Ruth V. Sabariego
- [Gmsh] Negative area with MEDIT mesh format 2D.
Philippe Miron
- [Gmsh] Negative area with MEDIT mesh format 2D.
Geordie McBain
- [Gmsh] Negative area with MEDIT mesh format 2D.
Geordie McBain
- [Gmsh] netCDF format?
lazlo (sfr)
- [Gmsh] NetCDF to Gmsh
Billy Araujo
- [Gmsh] newp incorrect after Merging IGES?
Geordie McBain
- [Gmsh] newp incorrect after Merging IGES?
Christophe Geuzaine
- [Gmsh] newp incorrect after Merging IGES?
Geordie McBain
- [Gmsh] node ordering of triangles
Bart Vandewoestyne
- [Gmsh] node ordering of triangles
Mikhail Titov
- [Gmsh] node reordering
Umut Tabak
- [Gmsh] Nodes
Chen-Ket Chai
- [Gmsh] Nodes
Mikhail Titov
- [Gmsh] Nodes
jean pierre aubry
- [Gmsh] Nodes
Geordie McBain
- [Gmsh] nodes are generated but not used in the tetra mesh
Umut Tabak
- [Gmsh] nodes are generated but not used in the tetra mesh
Christophe Geuzaine
- [Gmsh] nodes are generated but not used in the tetra mesh
Umut Tabak
- [Gmsh] Node sets / groups
Olivier DESLANDES
- [Gmsh] Node sets / groups
Geordie McBain
- [Gmsh] Node sets / groups
Geordie McBain
- [Gmsh] Nodes labeling
Lucia Carichino
- [Gmsh] Nodes labeling
Christophe Geuzaine
- [Gmsh] Nodes labeling
Christophe Geuzaine
- [Gmsh] numeric scale questions
Steve Talent
- [Gmsh] Objets imbriques
Harald Songoro
- [Gmsh] Objets imbriques
Ruth V. Sabariego
- [Gmsh] Optimization problem related to random generator function?
Cesar Tirado
- [Gmsh] Other 3D mesh file formats?
Rui Maciel
- [Gmsh] partitioning in gmsh -- repost
Umut Tabak
- [Gmsh] partitioning in gmsh -- repost
Christophe Geuzaine
- [Gmsh] Pb de maillage
quemere_patrick
- [Gmsh] Pb de maillage
Christophe Geuzaine
- [Gmsh] Pb de maillage
Christophe Geuzaine
- [Gmsh] Periodic boundary
Jehanzeb Hameed
- [Gmsh] Periodic boundary
Ruth V. Sabariego
- [Gmsh] Periodic boundary
Jehanzeb Hameed
- [Gmsh] Periodic elements
Alexis Blasselle
- [Gmsh] Periodic elements
demesy
- [Gmsh] Periodic Surface : bug ?
francoise.saliou at free.fr
- [Gmsh] Periodic Surface : bug ?
Ruth V. Sabariego
- [Gmsh] periodic surfaces of a cube
Martin Genet
- [Gmsh] petsc link error with gmsh
Umut Tabak
- [Gmsh] petsc link error with gmsh
Christophe Geuzaine
- [Gmsh] Physical entities in mesh file format
Simone Cassani
- [Gmsh] Physical entities in mesh file format
Geordie McBain
- [Gmsh] physical group orderind in med file
jean pierre aubry
- [Gmsh] physical groups from CAD import
Jan Schmitz
- [Gmsh] physical groups from CAD import
Hansen Michael
- [Gmsh] Physical groups in msh file
D Haley
- [Gmsh] Physical groups in msh file
Geordie McBain
- [Gmsh] physical groups not displaying correctly from home made msh file
Danny Lathouwers - TNW
- [Gmsh] physical groups not displaying correctly from home made msh file
Christophe Geuzaine
- [Gmsh] PhysicalNames
paul.carrico at free.fr
- [Gmsh] PhysicalNames
Mikhail Artemiev
- [Gmsh] Physical surface
Alexis Blasselle
- [Gmsh] Physical surface
David Colignon
- [Gmsh] Physical surface
Ruth V. Sabariego
- [Gmsh] Physical surface
Alexis Blasselle
- [Gmsh] Please help (Error while meshing a geometry)
Sharobeam, Monir
- [Gmsh] Please help (Error while meshing a geometry)
David Colignon
- [Gmsh] Please help (Error while meshing a geometry)
David Colignon
- [Gmsh] Plot3D mesh
Vitor M. Braga
- [Gmsh] Plot3D mesh
Christophe Geuzaine
- [Gmsh] Plot3D mesh
Christophe Geuzaine
- [Gmsh] plot a vector field in Gmsh
Marios Papadopoulos
- [Gmsh] plot a vector field in Gmsh
Geordie McBain
- [Gmsh] plotting issues
Danny Lathouwers - TNW
- [Gmsh] plotting issues
Geordie McBain
- [Gmsh] Plugin CutGrid
Matthieu Duponcheel
- [Gmsh] Plugin Evaluate: write results in a new view ?
Zacharie De Grève
- [Gmsh] Point In Surface not translated to unrolled geo file
jean pierre aubry
- [Gmsh] Point In Surface not translated to unrolled geo file
Christophe Geuzaine
- [Gmsh] Point size settings ignored
Vidar Vidnes
- [Gmsh] pointsources and Nodes and Elements lists
Bart Vandewoestyne
- [Gmsh] pointsources and Nodes and Elements lists
jordi poblet
- [Gmsh] pointsources and Nodes and Elements lists
Francisco Gilabert Villegas
- [Gmsh] pointsources and Nodes and Elements lists
jordi poblet
- [Gmsh] pointsources and Nodes and Elements lists
Francisco Gilabert Villegas
- [Gmsh] pointsources and Nodes and Elements lists
jordi poblet
- [Gmsh] pointsources and Nodes and Elements lists
Bart Vandewoestyne
- [Gmsh] pointsources and Nodes and Elements lists
Geordie McBain
- [Gmsh] Point xxxx is identical with point yyyy. -- what does this mean?
Steve Talent
- [Gmsh] Point xxxx is identical with point yyyy. -- what does this mean?
Steve Talent
- [Gmsh] Point xxxx is identical with point yyyy. -- what does this mean?
Christophe Geuzaine
- [Gmsh] Possible bug in CMakeLists.txt script?: Stack size not set to 16 MB and Win32icon.res not linked for MinGW builds
Trevor Strickler
- [Gmsh] Post-processing: Assigning a single view to display scalar andvector data.
Mark Starnes
- [Gmsh] Post-processing views, from 2D to 3D
Karin&NiKo
- [Gmsh] Post-processing views, from 2D to 3D
Christophe Geuzaine
- [Gmsh] postprocessing: fill elements with one color only
Denis Laxalde
- [Gmsh] postprocessing: write Integrate results on the fly
demesy
- [Gmsh] postprocessing: write Integrate results on the fly
Christophe Geuzaine
- [Gmsh] Prism-Layer in 2D
Bernhard Stoevesandt
- [Gmsh] Prism-Layer in 2D
David Colignon
- [Gmsh] Problem extruding surfaces.
Christophe Geuzaine
- [Gmsh] Problem generating 3D mesh periodic in X and Y
Chris Newton
- [Gmsh] Problem generating 3D mesh periodic in X and Y
Ruth V. Sabariego
- [Gmsh] Problem of 3D meshing
CARATINI Grégory
- [Gmsh] Problem of 3D meshing
Ruth V. Sabariego
- [Gmsh] Problem of Gmsh restart after crash ?
Carton Pierre-Henri
- [Gmsh] Problem of Gmsh restart after crash ?
Ruth V. Sabariego
- [Gmsh] Problems when meshing a STEP file with the Mac OS X version
Benedikt Oswald
- [Gmsh] Problems with 2D meshes
Arnaud Mesgouez
- [Gmsh] Problems with 2D meshes
David Colignon
- [Gmsh] Problems with 2D meshes
Mesgouez Arnaud
- [Gmsh] Problems with 2D meshes
Arnaud Mesgouez
- [Gmsh] Problems with 2D meshes
Jean-Francois Remacle
- [Gmsh] Problems with embedded crack
olivier jamond
- [Gmsh] Problems with embedded crack
Ruth V. Sabariego
- [Gmsh] Problems with embedded crack
olivier jamond
- [Gmsh] Problems with embedded crack
Ruth V. Sabariego
- [Gmsh] Problems with embedded crack
olivier jamond
- [Gmsh] Problems with embedded crack
Christophe Geuzaine
- [Gmsh] ProblemsWithQuadrilateral2dmesh
Fernando Diego
- [Gmsh] ProblemsWithQuadrilateral2dmesh
Ruth V. Sabariego
- [Gmsh] Problems with the transfinite Algo
Henning.Scheufler at dlr.de
- [Gmsh] Problems with the transfinite Algo
Christophe Geuzaine
- [Gmsh] Problem while 3d-meshing
Alexis Blasselle
- [Gmsh] Problem while 3d-meshing
Ruth V. Sabariego
- [Gmsh] problem with 2D geometry representation?
Hugh Blackburn
- [Gmsh] problem with 2D geometry representation?
Hugh Blackburn
- [Gmsh] Problem with 3-D meshing cube with holes
Laurent Mahéo
- [Gmsh] Problem with 3-D meshing cube with holes
David Colignon
- [Gmsh] Problem with 3-D meshing cube with holes
David Colignon
- [Gmsh] Problem with a multiblock mesh
Felix Salazar
- [Gmsh] Problem with a multiblock mesh
Christophe Geuzaine
- [Gmsh] Problem with element size application
Jean-Pierre Lefebvre
- [Gmsh] Problem with gmsh post processing...
jacopo verani
- [Gmsh] Problem with meshing between surfaces
Krupp, Verena
- [Gmsh] Problem with meshing between surfaces
David Colignon
- [Gmsh] Problem with meshing between surfaces
David Colignon
- [Gmsh] Problem with meshing between surfaces
David Colignon
- [Gmsh] Problem with Plugin(Tetrahedralize)
Matthieu Labbé
- [Gmsh] Problem with Plugin(Tetrahedralize)
Christophe Geuzaine
- [Gmsh] Problem with Plugin(Tetrahedralize)
Matthieu Labbé
- [Gmsh] problem with the "force vector" option
Thomas DE-SOZA
- [Gmsh] problem with the "force vector" option
Christophe Geuzaine
- [Gmsh] Problem with volume creation in 3D geometry
Marina Tsili
- [Gmsh] Problem with volume creation in 3D geometry
David Colignon
- [Gmsh] Problem with volume creation in 3D geometry
Marina Tsili
- [Gmsh] progress with CGNS boundary data
Nigel Nunn
- [Gmsh] progress with CGNS boundary data
Christophe Geuzaine
- [Gmsh] progress with CGNS boundary data
Nigel Nunn
- [Gmsh] Pseudo 2-D unstructured Mesh
Emanuele T.
- [Gmsh] Pseudo 2-D unstructured Mesh
Emanuele T.
- [Gmsh] Pseudo 2-D unstructured Mesh
Eric Nutsch
- [Gmsh] Qt support?
Nico Schlömer
- [Gmsh] Qt support?
David Colignon
- [Gmsh] Qt support?
Nico Schlömer
- [Gmsh] Qt support?
Christophe Geuzaine
- [Gmsh] quad mesh
Pierre JUILLARD
- [Gmsh] quad mesh
Christophe Geuzaine
- [Gmsh] Query on GMSH
Sanyal Sebanti
- [Gmsh] Query on GMSH
David Colignon
- [Gmsh] Question
Syed Umair Uddin Qadri
- [Gmsh] question
Rafael Cortes
- [Gmsh] question
Geordie McBain
- [Gmsh] question 2
Rafael Cortes
- [Gmsh] question 2
Ruth V. Sabariego
- [Gmsh] question 2
Christophe Geuzaine
- [Gmsh] Question: 2-D element
Thien Hiep LE
- [Gmsh] question about Gmsh
Vitali Koissin
- [Gmsh] question about Gmsh
Christophe Geuzaine
- [Gmsh] question about mesh generation one hundred million tetrahedron elements?
liang dong
- [Gmsh] question about mesh generation one hundred million tetrahedron elements?
Umut Tabak
- [Gmsh] Question about Mesh Option for Tetrahedron Element Generation with GMSH
류은현
- [Gmsh] Question about Mesh Option for Tetrahedron Element Generation with GMSH
Christophe Geuzaine
- [Gmsh] Question about reclassify
Martin Vymazal
- [Gmsh] Question about reclassify
Christophe Geuzaine
- [Gmsh] Question about tetrahedron element generation with GMSH
류은현
- [Gmsh] Question about tetrahedron element generation with GMSH
David Colignon
- [Gmsh] Question about tetrahedron element generation with GMSH
Jean-Francois Remacle
- [Gmsh] Question about tetrahedron element with GMSH, 2nd.
류은현
- [Gmsh] Question about using GMSH
류은현
- [Gmsh] Question about using GMSH
Christophe Geuzaine
- [Gmsh] Question gmsh
David Colignon
- [Gmsh] Question on 3D hex mesh
mirzaee
- [Gmsh] Question on 3D hex mesh
Christophe Geuzaine
- [Gmsh] question on partitioning
Umut Tabak
- [Gmsh] Question regarding the restrict field
Stéphane BLANCHET
- [Gmsh] Question regarding the restrict field
Stéphane Blanchet
- [Gmsh] Question regarding the restrict field
David Colignon
- [Gmsh] Question regarding the restrict field
David Colignon
- [Gmsh] Question regarding the restrict field with volumes
Stéphane Blanchet
- [Gmsh] questions about gmsh
463575346
- [Gmsh] Questions concernant des ajouts de code à Gmsh
nicolas kowalski
- [Gmsh] Questions concernant des ajouts de code à Gmsh
David Colignon
- [Gmsh] Questions concernant des ajouts de code à Gmsh
Pierre JUILLARD
- [Gmsh] Questions concernant des ajouts de code à Gmsh
nicolas kowalski
- [Gmsh] questions on the .msh-file
Martin Huber
- [Gmsh] questions on the .msh-file
Geordie McBain
- [Gmsh] raffinement dans un cercle
ouafa bouloumou
- [Gmsh] raffinement dans un cercle
David Colignon
- [Gmsh] raffinement dans un cercle
Ruth V. Sabariego
- [Gmsh] Re-meshing .msh
Leguay Romain
- [Gmsh] Re-meshing .msh
Leguay Romain
- [Gmsh] Re-meshing .msh
Ruth V. Sabariego
- [Gmsh] Re-meshing .msh
Eric Nutsch
- [Gmsh] RE : Mesh-Error
Hoessler, Julien
- [Gmsh] RE : Mesh-Error
julien hoessler
- [Gmsh] RE : Structured Mesh in GMSH
Hoessler, Julien
- [Gmsh] Re : Third coordinate Z not wanted
heolglaz at aol.com
- [Gmsh] Reading OpenCascade files in Gmsh
Martin Vymazal
- [Gmsh] Reading OpenCascade files in Gmsh
Christophe Geuzaine
- [Gmsh] Reading OpenCascade files in Gmsh
Martin Vymazal
- [Gmsh] reclassify tool
Umut Tabak
- [Gmsh] reclassify tool
Christophe Geuzaine
- [Gmsh] Refinement on curvature
Gaulier Pierre
- [Gmsh] Remove duplicate entities in GEO file.
Billy Araujo
- [Gmsh] Remove duplicate entities in GEO file.
Christophe Geuzaine
- [Gmsh] Remove duplicate entities in GEO file.
Billy Araujo
- [Gmsh] ReplaceDuplicatePoints malfunction
Konstantinos Poulios
- [Gmsh] ReplaceDuplicatePoints malfunction
Konstantinos Poulios
- [Gmsh] ReplaceDuplicatePoints malfunction
Jean-Francois Remacle
- [Gmsh] ReplaceDuplicatePoints malfunction
Konstantinos Poulios
- [Gmsh] ReplaceDuplicatePoints malfunction
logari81
- [Gmsh] Representation of Rotational Boundary Conditions
Matt Salveson
- [Gmsh] restrict field
Stéphane BLANCHET
- [Gmsh] restrict field
David Colignon
- [Gmsh] restrict field
Stéphane BLANCHET
- [Gmsh] restrict field
David Colignon
- [Gmsh] restrict field
Christophe Geuzaine
- [Gmsh] restrict field
Stéphane BLANCHET
- [Gmsh] restrict field
Stéphane BLANCHET
- [Gmsh] Save 2 mesh files from terminal
Hansen Michael
- [Gmsh] Save 2 mesh files from terminal
Mikhail Titov
- [Gmsh] Saving a mesh in 2D
Alexis Blasselle
- [Gmsh] Saving a mesh in 2D
Geordie McBain
- [Gmsh] Saving MED mesh in Ubuntu
Hansen Michael
- [Gmsh] Saving MED mesh in Ubuntu
Dmitrijs Ledkovs
- [Gmsh] Saving MED mesh in Ubuntu
Hansen Michael
- [Gmsh] saw text question
Steve Henck
- [Gmsh] saw text question
Christophe Geuzaine
- [Gmsh] Scalar product of complex vector fields from different views in Gmsh ?
Zacharie De Grève
- [Gmsh] Segmentation Fault avec le plugin CutGrid
Matthieu Duponcheel
- [Gmsh] Segmentation Fault avec le plugin CutGrid
Christophe Geuzaine
- [Gmsh] segmentation fault when opening a .igs file
Louis Gagnon
- [Gmsh] segmentation fault when opening a .igs file
Christophe Geuzaine
- [Gmsh] Select physical groups
Trimarchi D.
- [Gmsh] Select physical groups
David Colignon
- [Gmsh] size function with Gmsh
Stephane Blanchet
- [Gmsh] size function with Gmsh
David Colignon
- [Gmsh] Socket connection between octave and gmsh
Henk van Weers
- [Gmsh] SOLVED : [Fwd: Problem with element size application]
Jean-Pierre Lefebvre
- [Gmsh] some question about how to use GMSH
463575346
- [Gmsh] some question about how to use GMSH
Geordie McBain
- [Gmsh] some question about how to use GMSH
463575346
- [Gmsh] something wrong in edge loop after extrude a line or a surface
Paulo at gmx
- [Gmsh] something wrong in edge loop after extrude a line or a surface
Christophe Geuzaine
- [Gmsh] sphere created in Salome produces empty mesh
Jan Schmitz
- [Gmsh] sphere created in Salome produces empty mesh
Jean-Francois Remacle
- [Gmsh] sphere created in Salome produces empty mesh
Jan Schmitz
- [Gmsh] sphere created in Salome produces empty mesh
David Colignon
- [Gmsh] sphere created in Salome produces empty mesh
Jan Schmitz
- [Gmsh] sphere created in Salome produces empty mesh
David Colignon
- [Gmsh] Splines with end conditions
Jonathan Hargreaves
- [Gmsh] Split a line
Riccardo Rampini
- [Gmsh] Split line in gmsh not working
Wai Sam Wong
- [Gmsh] Split line in gmsh not working
julien hoessler
- [Gmsh] STEP file import
g.yu at qmul.ac.uk
- [Gmsh] STEP file import
David Colignon
- [Gmsh] STL 2D to 3D with Gmsh
Serge-Étienne Parent
- [Gmsh] STL 2D to 3D with Gmsh
Serge-Étienne Parent
- [Gmsh] STL 2D to 3D with Gmsh
David Colignon
- [Gmsh] STL 2D to 3D with Gmsh
Ruth V. Sabariego
- [Gmsh] STL element entities
Wai Sam Wong
- [Gmsh] STL element entities
David Colignon
- [Gmsh] STL in gmsh
Uwe.Mittag at dlr.de
- [Gmsh] STL in gmsh
Ruth V. Sabariego
- [Gmsh] stp import and periodic BC's
gdemesy at physics.utoronto.ca
- [Gmsh] Structured Mesh in GMSH
Vitor M. Braga
- [Gmsh] subdividing an edge of a transfinite surface
Dr Colin J. Cotter
- [Gmsh] subdividing an edge of a transfinite surface
David Colignon
- [Gmsh] subdividing an edge of a transfinite surface
Dr Colin J. Cotter
- [Gmsh] subdividing an edge of a transfinite surface
Dr Colin J. Cotter
- [Gmsh] Suggestions for gmsh
renaud.sizaire at ferespost.be
- [Gmsh] Suggestions for gmsh
Christophe Geuzaine
- [Gmsh] Suggestions for gmsh
Christophe Geuzaine
- [Gmsh] surface reparametrization
Pierre JUILLARD
- [Gmsh] surface reparametrization examples
Pierre JUILLARD
- [Gmsh] surface reparametrization examples
David Colignon
- [Gmsh] surface reparametrization examples
Pierre JUILLARD
- [Gmsh] surface reparametrization examples
Pierre JUILLARD
- [Gmsh] surface reparametrization examples
Pierre JUILLARD
- [Gmsh] surface reparametrization from msh file giving problem?
Pierre JUILLARD
- [Gmsh] System calls with Windows
michael.asam at infineon.com
- [Gmsh] System calls with Windows
michael.asam at infineon.com
- [Gmsh] Third and fourth order tetrahedra?
Rui Maciel
- [Gmsh] Third and fourth order tetrahedra?
Christophe Geuzaine
- [Gmsh] Third coordinate Z not wanted
heolglaz at aol.com
- [Gmsh] Third coordinate Z not wanted
Dmitrijs Ledkovs
- [Gmsh] Third coordinate Z not wanted
Geordie McBain
- [Gmsh] To create physical surface in a step file
Rakshith B R
- [Gmsh] Tolerance option for the meshing module?
Jö Fahlke
- [Gmsh] transfinite BSpine Using Progression
Seiji Adachi
- [Gmsh] transfinite properties lost in unrolled .geo file
jean pierre aubry
- [Gmsh] transfinite properties lost in unrolled .geo file
Christophe Geuzaine
- [Gmsh] transfinite surfaces
Dr Colin J. Cotter
- [Gmsh] transfinite surfaces
Dr Colin J. Cotter
- [Gmsh] Trouble meshing 3d shape in "wind tunnel"
Bob Basham
- [Gmsh] Trouble meshing 3d shape in "wind tunnel"
César A. Vecchio Toloy
- [Gmsh] Trouble meshing 3d shape in "wind tunnel"
Bob Basham
- [Gmsh] Trouble meshing 3d shape in "wind tunnel"
Bob Basham
- [Gmsh] trouver les parents d'un objet
Benoit Nennig
- [Gmsh] trouver les parents d'un objet
David Colignon
- [Gmsh] Unexpected behaviour with Geometry.AutoCoherence=0 and duplicatedsurfaces.
Mark Starnes
- [Gmsh] Unexpected behaviour with Geometry.AutoCoherence=0 and duplicatedsurfaces.
Mark Starnes
- [Gmsh] Unexpected behaviour with Geometry.AutoCoherence=0 and duplicatedsurfaces.
Christophe Geuzaine
- [Gmsh] Unexpected behaviour with Geometry.AutoCoherence=0 andduplicatedsurfaces.
Mark Starnes
- [Gmsh] Unstructured hexahedral meshes
César A. Vecchio Toloy
- [Gmsh] Unstructured hexahedra mesh from STL geometry
Meiner Auchmeiner
- [Gmsh] Unstructured hexahedra mesh from STL geometry
Jean-Francois Remacle
- [Gmsh] Unstructured hexahedra mesh from STL geometry
Meiner Auchmeiner
- [Gmsh] Unstructured hexahedra mesh from STL geometry
Meiner Auchmeiner
- [Gmsh] Unstructured hexahedra mesh from STL geometry
Jean-Francois Remacle
- [Gmsh] use extruded lines to define new surfaces
julien hoessler
- [Gmsh] use extruded lines to define new surfaces
Eric Nutsch
- [Gmsh] Using Gmsh as a post-processor
Rami Ben-Zvi
- [Gmsh] Using Gmsh as a post-processor
Geordie McBain
- [Gmsh] Using Gmsh as a post-processor
Rami Ben-Zvi
- [Gmsh] using Physical Groups as boundary conditions in .mesh file
Felipe Montefuscolo
- [Gmsh] using Physical Groups as boundary conditions in .mesh file
Felipe Montefuscolo
- [Gmsh] vector arrows tip on point
jose.sancho
- [Gmsh] vector arrows tip on point
Christophe Geuzaine
- [Gmsh] Visualization of high order FE
Gonçalo Pena
- [Gmsh] Visualization of high order FE
Christophe Geuzaine
- [Gmsh] Visualization of scalar values on line elements
Matt Salveson
- [Gmsh] Visualization of scalar values on line elements
David Colignon
- [Gmsh] Voronoi
Eduardo Bretas
- [Gmsh] Voronoi
Eduardo Bretas
- [Gmsh] vrml to gmsh
Антон Проскурин
- [Gmsh] vrml to gmsh
Ruth V. Sabariego
- [Gmsh] vtk file with mesh and data
marco restelli
- [Gmsh] vtk file with mesh and data
Christophe Geuzaine
- [Gmsh] warning message
Wei-Dong Lian
- [Gmsh] Way to calculate new view
Billy Araujo
- [Gmsh] Way to calculate new view
Christophe Geuzaine
- [Gmsh] Which pos format for mesh adapting
Gaulier Pierre
- [Gmsh] windows 7 compatible
gianluca mancini
- [Gmsh] windows 7 compatible
Billy Araujo
- [Gmsh] Wrong definition of a volume
Alexis Blasselle
- [Gmsh] Wrong definition of a volume
demesy
- [Gmsh] Wrong definition of a volume
Ruth V. Sabariego
- [Gmsh] Wrong definition of a volume
Alexis Blasselle
- [Gmsh] Wrong definition of a volume
Christophe Geuzaine
- [Gmsh] Wrong definition of Ruled Surface
donato.stante at tiscali.it
- [Gmsh] Wrong definition of Ruled Surface
Ruth V. Sabariego
- [Gmsh] Wrong definition of Ruled Surface
julien hoessler
- [Gmsh] Wrong definition of Ruled Surface
jean pierre aubry
- [Gmsh] x-y plots [was: x-y plots and elevation(Scalar warp) in 2D]
Geordie McBain
- [Gmsh] x-y plots [was: x-y plots and elevation(Scalar warp) in 2D]
Christophe Prud'homme
- [Gmsh] x-y plots and elevation(Scalar warp) in 2D
Christophe Prud'homme
- [Gmsh] x-y plots and elevation(Scalar warp) in 2D
Christophe Geuzaine
- [Gmsh] Xlib: extension "GLX" missing on display ":0.0". Insufficient GL support
Leandro Castro
- [Gmsh] Xlib: extension "GLX" missing on display ":0.0". Insufficient GL support
Leandro Castro
- [Gmsh] Zoom keyboard command?
Richard Crozier
- [Gmsh] Zoom keyboard command?
Christophe Geuzaine
- [Gmsh] 回复: some question about how to use GMSH
463575346
- [Gmsh] 回复: some question about how to use GMSH
Eric Nutsch
Last message date:
Fri Dec 24 10:42:31 CET 2010
Archived on: Mon Aug 3 08:20:12 CEST 2015
This archive was generated by
Pipermail 0.09 (Mailman edition).