[Gmsh] Question regarding the restrict field
David Colignon
David.Colignon at ulg.ac.be
Fri Apr 30 10:56:16 CEST 2010
Hi Stéphane,
first of all, as stated in the doc, the Attractor/FacesList is experimental and is not guaranteed to work...
Then, in your .geo, only Field[3] will be taken into account. If you want to combine several fields, then you must
define a last field as the minimum (Min) or maximum (Max) of all the other fields.
But I think you should start by defining a characteristic length at every points of your geometry ( item 1. in
http://www.geuz.org/gmsh/doc/texinfo/gmsh.html#Characteristic-lengths )
Regards,
Dave
On 29/04/10 17:37, Stéphane Blanchet wrote:
> Hello,
>
> Here is my geo file, in this example I would like to restrict the
> "threshold" field to all the volumes, except the outlet. But the mesh I
> get is very bad, as if GMsh did not take into account the threshold for
> the whole geometry.
> I probably did something wrong but I don't know where...
>
> My Best Regards,
>
> Stephane
>
>
>
>
> > Date: Thu, 29 Apr 2010 14:09:31 +0200
> > From: David.Colignon at ulg.ac.be
> > To: stephane.blanchet at esstin.uhp-nancy.fr
> > CC: gmsh at geuz.org
> > Subject: Re: [Gmsh] Question regarding the restrict field
> >
> >
> > On 16/04/10 10:55, Stéphane BLANCHET wrote:
> >
> > > Dear support,
> > >
> > > I use the restrict field to mesh my geometry, and it works so far with
> > > surfaces. But when I want to use this field on a volume, using
> > > "RegionsList", it seems that Gmsh does not handle this restriction, and
> > > I really don't know why.
> >
> >
> > Hi Stéphane,
> >
> > can you send us an example and a more precise description of your
> problem ?
> >
> > Regards,
> >
> > Dave
> >
> >
> > --
> > David Colignon, Ph.D.
> > Collaborateur Logistique du F.R.S.-FNRS
> > CÉCI - Consortium des Équipements de Calcul Intensif
> > ACE - Applied & Computational Electromagnetics
> > Sart-Tilman B28
> > Université de Liège
> > 4000 Liège - BELGIQUE
> > Tél: +32 (0)4 366 37 32
> > Fax: +32 (0)4 366 29 10
> > WWW: http://hpc.montefiore.ulg.ac.be/
> > Agenda:
> http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
> >
> >
> >
> >
> > >
> > > I would really appreciate any help.
> > >
> > > Furthermore, it seems there are some restrictions about the creation of
> > > prismatic boundary layers (problem of collapsing, etc.), so I am
> > > wondering if this is something you are working on it, or if this is a
> > > permanent restriction.
> > >
> > > My best regards
> > >
> > >
> > > ---------------
> > >
> > > BLANCHET Stéphane
> > >
> > > Elève-Ingénieur ESSTIN (5eme Année)
> > > Option: Mécanique des Fluides et Énergétique
> > >
> > > Tél: 0632224601
> > > Mail: stephane.blanchet at esstin.uhp-nancy.fr
> > >
> > > Ecole Supérieure des Sciences et Technologies de l'Ingénieur de Nancy
> > > Université Henri Poincaré Nancy I
> > > 2, rue Jean Lamour
> > > 54 519 - Vandoeuvre Lès Nancy
> > >
> > >
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > > Envie de naviguer sur Internet sans laisser de trace? La solution avec
> > > Internet Explorer 8 <http://clk.atdmt.com/FRM/go/207186970/direct/01/>
> > >
> > >
> > >
> > > _______________________________________________
> > > gmsh mailing list
> > > gmsh at geuz.org
> > > http://www.geuz.org/mailman/listinfo/gmsh
> >
>
> ------------------------------------------------------------------------
> Envie de naviguer sur Internet sans laisser de trace? La solution avec
> Internet Explorer 8 <http://clk.atdmt.com/FRM/go/207186970/direct/01/>