2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Jan 2 07:27:16 CET 2018
Ending: Fri Dec 28 07:30:50 CET 2018
Messages: 891

• [Gmsh] periodic pairs of internal nodes of each edge   Koen Hillewaert (Cenaero)
• [Gmsh] Periodic surfaces not working for second-order elements in gmsh4   Koen Hillewaert (Cenaero)
• [Gmsh] Write individual physical surfaces, preferably from Python API   Herzig Ivo (herziivo)
• [Gmsh] Write individual physical surfaces, preferably from Python API   Herzig Ivo (herziivo)
• [Gmsh] Build the mesh in my own program   674582218
• [Gmsh] Spiral coil?   Mj AJ
• [Gmsh] Using load_gmsh4.m to read cube.msh into Matlab   Abiti Adili
• [Gmsh] using load_gmsh4.m   Abiti Adili
• [Gmsh] saving the mesh for a subdomain separately   Abiti Adili
• [Gmsh] saving the mesh for a subdomain separately   Abiti Adili
• [Gmsh] listing elements according to which physical volume they belong to   Abiti Adili
• [Gmsh] listing elements according to which physical volume they belong to   Abiti Adili
• [Gmsh] listing elements according to which physical volume they belong to   Abiti Adili
• [Gmsh] Mesh transiton   Vitor Soares Rabelo Adriano
• [Gmsh] Fan error in BL high order mesh   Alberto
• [Gmsh] Definition fan in BL   Alberto
• [Gmsh] Defining a small circle on a truncated cone   Najib Alia
• [Gmsh] P2 visualisation   Jose Paulo Moitinho de Almeida
• [Gmsh] using load_gmsh4.m   Jose Paulo Moitinho de Almeida
• [Gmsh] Surface nodes   Zuheyr Alsalihi
• [Gmsh] gmsh calculix input for periodic geometries   Zuheyr Alsalihi
• [Gmsh] Gmsh how to extract the node ID's on a given 3D Mesh Boundary Surface   Zuheyr Alsalihi
• [Gmsh] Gmsh how to extract the node ID's on a given 3D Mesh Boundary Surface   Zuheyr Alsalihi
• [Gmsh] Gmsh how to extract the node ID's on a given 3D Mesh Boundary Surface   Zuheyr Alsalihi
• [Gmsh] Option file options for batch   Zuheyr Alsalihi
• [Gmsh] Rotationally periodic surface   Zuheyr Alsalihi
• [Gmsh] How to make a rotationally periodic 3D mesh   Zuheyr Alsalihi
• [Gmsh] Gmsh Tutorial 1 fails...?   Zuheyr Alsalihi
• [Gmsh] Higher Order Tools: "Regulerize"   Zuheyr Alsalihi
• [Gmsh] Boolean operations   Zuheyr Alsalihi
• [Gmsh] Mesh generation with a hole   Zuheyr Alsalihi
• [Gmsh] Gmsh subscription fails   Zuheyr Alsalihi
• [Gmsh] problem with BoundingBox Volume{}   Marco Antolovic
• [Gmsh] problem with BoundingBox Volume{}   Marco Antolovic
• [Gmsh] MSH file format   Rodolfo Araya
• [Gmsh] Problem with GMSH using command line reclassify option   Jacinto Artigas
• [Gmsh] Problem with GMSH using command line reclassify option   Jacinto Artigas
• [Gmsh] [intersection] Detect intersection in volumes   Germán Martínez Ayuso
• [Gmsh] ASCII mesh format   Yoann LE BARS
• [Gmsh] ASCII mesh format   Yoann LE BARS
• [Gmsh] ASCII mesh format   Yoann LE BARS
• [Gmsh] ASCII mesh format   Yoann LE BARS
• [Gmsh] rotating an stl   Ricardo Ruiz Baier
• [Gmsh] openCASCADE error: Unknown entity of dimension x with tag y   Deep Bandivadekar
• [Gmsh] openCASCADE error: Unknown entity of dimension x with tag y   Deep Bandivadekar
• [Gmsh] defaultFaces when exporting mesh to OpenFoam   Deep Bandivadekar
• [Gmsh] Structured mesh only in half of the domain, can you spot the error?   Deep Bandivadekar
• [Gmsh] Mesh and geometry edges do not coincide: flow over cylinder   Deep Bandivadekar
• [Gmsh] UNV export to Fluent   Ricardo Gomez Bardon
• [Gmsh] Crack plugin - Physical tags   Barrero Bilbao, Alejandro
• [Gmsh] python-api: Problem with signed line-tags with the OCC   Martin Baun
• [Gmsh] Error : Self intersecting surface mesh, computing intersections   Berta Beltran
• [Gmsh] Error : Self intersecting surface mesh, computing intersections   Berta Beltran
• [Gmsh] Plot3d format   Bensassi, Khalil (ARC-TSA)[Analytical Mechanics Associates, INC.]
• [Gmsh] "Tag # already exists" with OpenCASCADE engine   Wang Bin
• [Gmsh] "Tag # already exists" with OpenCASCADE engine   Wang Bin
• [Gmsh] boolean with surface loop   Guido Blöcher
• [Gmsh] Mesh volumes partially in contact   Harry Bosch
• [Gmsh] embedded surface not meshed ?   Winfried Boxleitner
• [Gmsh] Help on format ASCII 2   A.Mesut Boz
• [Gmsh] Trouble with mesh-files   Adrian Braa
• [Gmsh] Point coordinates at python api   Roman Butov
• [Gmsh] compatibility problems V2.5.0 & V3.0.7   Bäcker, Christina (IAS GmbH)
• [Gmsh] Unable to display an msh file   Praveen C
• [Gmsh] Unable to display an msh file   Praveen C
• [Gmsh] Bogue dans les couleurs   BERTHELLEMY Jacques (Directeur technique) - CEREMA/DTecITM/CTOA/DGOI
• [Gmsh] RE Bogue dans les couleurs   BERTHELLEMY Jacques (Directeur technique) - CEREMA/DTecITM/CTOA/DGOI
• [Gmsh] Fonctionnement des couleurs   BERTHELLEMY Jacques (Directeur technique) - CEREMA/DTecITM/CTOA/DGOI
• [Gmsh] Missing surfaces in mesh when using Boolean operators   ISABELA PAREDES CISNEROS
• [Gmsh] [gmsh] Boolean operation - Fine to coarse mesh   Benoit CURVERS
• [Gmsh] [gmsh] Boolean operation - Fine to coarse mesh   Benoit CURVERS
• [Gmsh] Problem with mesh size on Points / Warning during the 3D mesh   Benoit CURVERS
• [Gmsh] Problem with mesh size on Points / Warning during the 3D mesh   Benoit CURVERS
• [Gmsh] Problem with mesh size on Points / Warning during the 3D mesh   Benoit CURVERS
• [Gmsh] Problem with the Boolean Operation   Benoit CURVERS
• [Gmsh] Problem with the Boolean Operation   Benoit CURVERS
• [Gmsh] Export stl format   Benoit CURVERS
• [Gmsh] Parabola   Michel Cassagnes
• [Gmsh] issue concerning the boolean difference of two volumes?   Nicolae Cindea
• [Gmsh] Uniform element size throughout the geometry   David Colignon
• [Gmsh] How can I mesh a CAD model and set physical surfaces automatically?   David Colignon
• [Gmsh] How can I mesh a CAD model and set physical surfaces automatically?   David Colignon
• [Gmsh] Visu Unv   Compere, Gaetan
• [Gmsh] Higher order elements   Curti, M.
• [Gmsh] Avoid duplicate entities with Geometry.OCCAutoFix = 0   Juan Córcoles
• [Gmsh] Avoid duplicate entities with Geometry.OCCAutoFix = 0   Juan Córcoles
• [Gmsh] Avoid duplicate entities with Geometry.OCCAutoFix = 0   Juan Córcoles
• [Gmsh] Avoid duplicate entities with Geometry.OCCAutoFix = 0   Juan Córcoles
• [Gmsh] Gmsh 3.0.6   John W Daily
• [Gmsh] Identical points in triangulation   Demuth, Alexander
• [Gmsh] fillet and coherence behavior   Guillaume Demésy
• [Gmsh] fillet and coherence behavior   Guillaume Demésy
• [Gmsh] fillet and coherence behavior   Guillaume Demésy
• [Gmsh] Non constant element sizes on a BSpline   Dorian Depriester
• [Gmsh] Non constant element sizes on a BSpline   Dorian Depriester
• [Gmsh] Post processing higher oder triangles in GMSH   Emayavaramban Elango
• [Gmsh] Gmsh output mesh statistics in script (not in GUI)   Hector Espinoza
• [Gmsh] Recommendation for scripting in gmsh   Hector Espinoza
• [Gmsh] way to create a structured triangular mesh as shown in figure   Hector Espinoza
• [Gmsh] Uniform element size throughout the geometry   Harris FAROOQ
• [Gmsh] Uniform element size throughout the geometry   Harris FAROOQ
• [Gmsh] Barycentric refinement of simplicial meshes   Patrick Farrell
• [Gmsh] Intersection between 2 tetrahedral meshes   Patrick Farrell
• [Gmsh] example of using HXT- 3D Mesh function inside gmsh   Michael Faulwasser
• [Gmsh] top surface of region 1 has non toroidal quadto tri extrusion   Mst Sunzida Ferdoues
• [Gmsh] Volume{} creates duplicate Surfaces: gmsh w/o OpenCascade   Paul Fulmek
• [Gmsh] Build tetrahedral mesh with structured region   Robert Funnell
• [Gmsh] gmsh extrusion problem   GNED
• [Gmsh] Gmsh-4.0.4 Volume mesh issue   Simone GREMMO
• [Gmsh] Gmsh-4.0.4 Volume mesh issue   Simone GREMMO
• [Gmsh] Gmsh-4.0.4 Volume mesh issue   Simone GREMMO
• [Gmsh] gmsh GUI on server machine   Deepak Garg
• [Gmsh] Gmsh - High order node misplaced   Anthony Gee
• [Gmsh] Gmsh - High order node misplaced   Anthony Gee
• [Gmsh] Volume{} creates duplicate Surfaces: gmsh w/o OpenCascade   Christophe Geuzaine
• [Gmsh] Problem with viewing shaded surfaces   Christophe Geuzaine
• [Gmsh] top surface of region 1 has non toroidal quadto tri extrusion   Christophe Geuzaine
• [Gmsh] Gmsh version 3.0 query   Christophe Geuzaine
• [Gmsh] gmsh GUI on server machine   Christophe Geuzaine
• [Gmsh] GMSH and MED compilation in Linux-like environment in Windows   Christophe Geuzaine
• [Gmsh] Gmsh - High order node misplaced   Christophe Geuzaine
• [Gmsh] GMSH and MED compilation in Linux-like environment in Windows   Christophe Geuzaine
• [Gmsh] Bug: Extrusion with rotation by PI creates flat surface   Christophe Geuzaine
• [Gmsh] Conformal mesh, no tetrahedra in region, BooleanDifference   Christophe Geuzaine
• [Gmsh] Error of meshing result of Gmsh   Christophe Geuzaine
• [Gmsh] Error of meshing result of Gmsh   Christophe Geuzaine
• [Gmsh] Extruding a 2D Surface Created in FreeCAD   Christophe Geuzaine
• [Gmsh] Boolean Fragments. Créate 3d mesh from surfaces. Surface Loop creates aditional surfaces   Christophe Geuzaine
• [Gmsh] Non constant element sizes on a BSpline   Christophe Geuzaine
• [Gmsh] how to specifically determine mesh size from imported STEP or BREP File ?   Christophe Geuzaine
• [Gmsh] Boolean Fragments. Créate 3d mesh from surfaces. Surface Loop creates aditional surfaces   Christophe Geuzaine
• [Gmsh] 2D Mesh for OpenFOAM: boundary layer field and extrusion   Christophe Geuzaine
• [Gmsh] Definition fan in BL   Christophe Geuzaine
• [Gmsh] refine existing mesh   Christophe Geuzaine
• [Gmsh] stl with double precision   Christophe Geuzaine
• [Gmsh] Postprocessing Interpolation schemes   Christophe Geuzaine
• [Gmsh] error: Cannot bind multiple faces to single tag   Christophe Geuzaine
• [Gmsh] embedded surface not meshed ?   Christophe Geuzaine
• [Gmsh] refine existing mesh   Christophe Geuzaine
• [Gmsh] Issues with gmsh GUI after updating to 3.0.7   Christophe Geuzaine
• [Gmsh] Error: Unknown Open Cascade entity. Could not apply Boolean operator   Christophe Geuzaine
• [Gmsh] Error: Unknown Open Cascade entity. Could not apply Boolean operator   Christophe Geuzaine
• [Gmsh] Mesh volumes partially in contact   Christophe Geuzaine
• [Gmsh] fillet and coherence behavior   Christophe Geuzaine
• [Gmsh] grouping surfaces into a surface loop and creating a volume generates unwanted surfaces   Christophe Geuzaine
• [Gmsh] help in reading element connectivity   Christophe Geuzaine
• [Gmsh] refine existing mesh   Christophe Geuzaine
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   Christophe Geuzaine
• [Gmsh] Line loop and Open cascade   Christophe Geuzaine
• [Gmsh] Line loop and Open cascade   Christophe Geuzaine
• [Gmsh] Line loop and Open cascade   Christophe Geuzaine
• [Gmsh] Gmsh 2D Boundary Layer around a bluff body   Christophe Geuzaine
• [Gmsh] surface-by-surface 2d algorithm   Christophe Geuzaine
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   Christophe Geuzaine
• [Gmsh] getVertex in gmsh.cpp in gmsh-git-source   Christophe Geuzaine
• [Gmsh] Ellipsoid with OpenCASCADE kernel   Christophe Geuzaine
• [Gmsh] half of structure disappears   Christophe Geuzaine
• [Gmsh] gmsh ASCII file version for EDF Syrthes 4.3   Christophe Geuzaine
• [Gmsh] fixed viewpoint   Christophe Geuzaine
• [Gmsh] gmsh / jpg / Error : Unknown output file format   Christophe Geuzaine
• [Gmsh] gmsh ASCII file version for EDF Syrthes 4.3   Christophe Geuzaine
• [Gmsh] half of structure disappears   Christophe Geuzaine
• [Gmsh] half of structure disappears   Christophe Geuzaine
• [Gmsh] How to keep edge and cell together in partitioned mesh?   Christophe Geuzaine
• [Gmsh] OpenCascase Wire   Christophe Geuzaine
• [Gmsh] spheres_visualisation   Christophe Geuzaine
• [Gmsh] Retrieve indices of entities created by OCC   Christophe Geuzaine
• [Gmsh] Visu Unv   Christophe Geuzaine
• [Gmsh] Hex-Mesh problem   Christophe Geuzaine
• [Gmsh] cylinder in a box   Christophe Geuzaine
• [Gmsh] How to have structured mesh with holes on plane surface?   Christophe Geuzaine
• [Gmsh] facet intersecting problems when using Compound surfaces   Christophe Geuzaine
• [Gmsh] Create Physical Volume   Christophe Geuzaine
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Christophe Geuzaine
• [Gmsh] Stuck in infinite loop on BooleanDifference?   Christophe Geuzaine
• [Gmsh] ASCII mesh format   Christophe Geuzaine
• [Gmsh] Two post-processing views: one as displacement one as vector field   Christophe Geuzaine
• [Gmsh] automated creation of tetrahedral meshes based on CAD geometry   Christophe Geuzaine
• [Gmsh] A difference running Gmsh in command line and in GUI for 3-D mesh generation?   Christophe Geuzaine
• [Gmsh] filter out elements according to type   Christophe Geuzaine
• [Gmsh] API define periodic line   Christophe Geuzaine
• [Gmsh] API define periodic line   Christophe Geuzaine
• [Gmsh] filter out elements according to type   Christophe Geuzaine
• [Gmsh] Version of MINGW GCC used in CYGWIN to compile?   Christophe Geuzaine
• [Gmsh] Attractor & Distance   Christophe Geuzaine
• [Gmsh] filter out elements according to type   Christophe Geuzaine
• [Gmsh] get mesh volume   Christophe Geuzaine
• [Gmsh] ASCII mesh format   Christophe Geuzaine
• [Gmsh] Post processing higher oder triangles in GMSH   Christophe Geuzaine
• [Gmsh] Evolution of the Skin plugin   Christophe Geuzaine
• [Gmsh] Build API Demo Linking Static Libraries   Christophe Geuzaine
• [Gmsh] .step file editing   Christophe Geuzaine
• [Gmsh] Point coordinates at python api   Christophe Geuzaine
• [Gmsh] QMorph   Christophe Geuzaine
• [Gmsh] Visualising point data imported from MED files   Christophe Geuzaine
• [Gmsh] Strange Mesh using ThruSections   Christophe Geuzaine
• [Gmsh] [GMSH] Surface mesh for 3D solids   Christophe Geuzaine
• [Gmsh] Uniform element size throughout the geometry   Christophe Geuzaine
• [Gmsh] [GMSH] Surface mesh for 3D solids   Christophe Geuzaine
• [Gmsh] QMorph   Christophe Geuzaine
• [Gmsh] Visualising point data imported from MED files   Christophe Geuzaine
• [Gmsh] Point coordinates at python api   Christophe Geuzaine
• [Gmsh] Strategies to mesh with hexaedra   Christophe Geuzaine
• [Gmsh] get mesh volume   Christophe Geuzaine
• [Gmsh] Visualising point data imported from MED files   Christophe Geuzaine
• [Gmsh] Visualising point data imported from MED files   Christophe Geuzaine
• [Gmsh] Gmsh Python API   Christophe Geuzaine
• [Gmsh] Gmsh Python API   Christophe Geuzaine
• [Gmsh] issue concerning the boolean difference of two volumes?   Christophe Geuzaine
• [Gmsh] Use physical Groups after boolean operations   Christophe Geuzaine
• [Gmsh] single layer extrusion   Christophe Geuzaine
• [Gmsh] Bug with transfinite interface   Christophe Geuzaine
• [Gmsh] [gmsh] Boolean operation - Fine to coarse mesh   Christophe Geuzaine
• [Gmsh] Gmsh curved surface   Christophe Geuzaine
• [Gmsh] openCASCADE error: Unknown entity of dimension x with tag y   Christophe Geuzaine
• [Gmsh] Crash in Delaunay Quad 2d mesh using the Gmsh-api   Christophe Geuzaine
• [Gmsh] Problem with mesh size on Points / Warning during the 3D mesh   Christophe Geuzaine
• [Gmsh] Geometry from an order 2 surface mesh   Christophe Geuzaine
• [Gmsh] Problem with mesh size on Points / Warning during the 3D mesh   Christophe Geuzaine
• [Gmsh] Crash in Delaunay Quad 2d mesh using the Gmsh-api   Christophe Geuzaine
• [Gmsh] Problem with mesh size on Points / Warning during the 3D mesh   Christophe Geuzaine
• [Gmsh] bug in mesh generation   Christophe Geuzaine
• [Gmsh] Gmsh how to extract the node ID's on a given 3D Mesh Boundary Surface   Christophe Geuzaine
• [Gmsh] Problem with GMSH using command line reclassify option   Christophe Geuzaine
• [Gmsh] Export .geo as .step - "No OpenCASCADE model found"   Christophe Geuzaine
• [Gmsh] Option file options for batch   Christophe Geuzaine
• [Gmsh] Export .geo as .step - "No OpenCASCADE model found"   Christophe Geuzaine
• [Gmsh] Problem creating Line Loops with the OpenCASCADE geometry kernel   Christophe Geuzaine
• [Gmsh] MathEval field in a circle with Open Cascade   Christophe Geuzaine
• [Gmsh] How to make a rotationally periodic 3D mesh   Christophe Geuzaine
• [Gmsh] Gmsh Tutorial 1 fails...?   Christophe Geuzaine
• [Gmsh] Bug in Statistics window   Christophe Geuzaine
• [Gmsh] Error when switching from Built-In to OpenCascade Factory   Christophe Geuzaine
• [Gmsh] GetDP example in Gmsh   Christophe Geuzaine
• [Gmsh] Import .geo file to .stl mantaining names of surfaces   Christophe Geuzaine
• [Gmsh] Mesh of a bottle   Christophe Geuzaine
• [Gmsh] Error compiling static library   Christophe Geuzaine
• [Gmsh] mesh with interior boundaries   Christophe Geuzaine
• [Gmsh] Problem with the Boolean Operation   Christophe Geuzaine
• [Gmsh] Spline with built-in kernel versus OpenCascade kernel   Christophe Geuzaine
• [Gmsh] Boolean Difference Crashes Gmsh   Christophe Geuzaine
• [Gmsh] Gmsh input writer for LS-DYNA   Christophe Geuzaine
• [Gmsh] Is there a Chamfer function in Gmsh   Christophe Geuzaine
• [Gmsh] rotating an stl   Christophe Geuzaine
• [Gmsh] Get spline/bspline/bezier intermediate points   Christophe Geuzaine
• [Gmsh] python-api: Problem with signed line-tags with the OCC   Christophe Geuzaine
• [Gmsh] periodic pairs of internal nodes of each edge   Christophe Geuzaine
• [Gmsh] Duplicate Nodes at a Physical Interface   Christophe Geuzaine
• [Gmsh] OpenCASCADE wire or line loop with tag ** already exists   Christophe Geuzaine
• [Gmsh] segfaults on linux but not windows with SDK   Christophe Geuzaine
• [Gmsh] Problem with periodic boundary condition for a volume extruded using wire   Christophe Geuzaine
• [Gmsh] Parameters for mesh refinement in 3D   Christophe Geuzaine
• [Gmsh] Structured mesh only in half of the domain, can you spot the error?   Christophe Geuzaine
• [Gmsh] Having problems linking gmsh sdk libraries   Christophe Geuzaine
• [Gmsh] Mesh and geometry edges do not coincide: flow over cylinder   Christophe Geuzaine
• [Gmsh] matching 2D meshes   Christophe Geuzaine
• [Gmsh] Trouble with mesh-files   Christophe Geuzaine
• [Gmsh] Spline with built-in kernel versus OpenCascade kernel   Christophe Geuzaine
• [Gmsh] Gmsh produces meshes with different number of elements   Christophe Geuzaine
• [Gmsh] Intégration de Med 3.3.1   Christophe Geuzaine
• [Gmsh] 360 degree rotation of structured hexahedral mesh using OpenCASCADE factory leads to "findRootSourceFaceForFace() failed"   Christophe Geuzaine
• [Gmsh] cant export geo file as brep or step   Christophe Geuzaine
• [Gmsh] Plugin application on multi-mesh views   Christophe Geuzaine
• [Gmsh] problem with version 4.0   Christophe Geuzaine
• [Gmsh] problem with version 4.0   Christophe Geuzaine
• [Gmsh] otimize 3D netgen crashes   Christophe Geuzaine
• [Gmsh] duplicate result views   Christophe Geuzaine
• [Gmsh] 10-node tetrahedron elements   Christophe Geuzaine
• [Gmsh] 10-node tetrahedron elements   Christophe Geuzaine
• [Gmsh] duplicate result views   Christophe Geuzaine
• [Gmsh] duplicate result views   Christophe Geuzaine
• [Gmsh] surface normals in gmsh 4.0   Christophe Geuzaine
• [Gmsh] Mesh file format v4   Christophe Geuzaine
• [Gmsh] GhostElements Section   Christophe Geuzaine
• [Gmsh] Mesh file format v4   Christophe Geuzaine
• [Gmsh] Plugin problems on Windows ?   Christophe Geuzaine
• [Gmsh] How to improve the quality of mesh generation   Christophe Geuzaine
• [Gmsh] bulk import of physical names?   Christophe Geuzaine
• [Gmsh] Weird results in Transfinite Volume mesh with Transfinite AlternateLeft Surfaces   Christophe Geuzaine
• [Gmsh] (again) on v4 mesh format   Christophe Geuzaine
• [Gmsh] Compatibility Problem with Gmsh and SfePy   Christophe Geuzaine
• [Gmsh] export med 3.2 or 3.3?   Christophe Geuzaine
• [Gmsh] MSH file format   Christophe Geuzaine
• [Gmsh] Meshing algorithms and suggestions   Christophe Geuzaine
• [Gmsh] node and element sparsity in msh4   Christophe Geuzaine
• [Gmsh] node and element sparsity in msh4   Christophe Geuzaine
• [Gmsh] Meshing algorithms and suggestions   Christophe Geuzaine
• [Gmsh] node and element sparsity in msh4   Christophe Geuzaine
• [Gmsh] Question on gmsh meshing with size determined by executable   Christophe Geuzaine
• [Gmsh] Visualization of background field   Christophe Geuzaine
• [Gmsh] Cutting a hole out of a surface with BooleanDifference   Christophe Geuzaine
• [Gmsh] fixing boundary mesh   Christophe Geuzaine
• [Gmsh] Boundary layer extrusion   Christophe Geuzaine
• [Gmsh] gmsh-4.0.1 : error during cmake   Christophe Geuzaine
• [Gmsh] gmsh-4.0.1 : error during cmake   Christophe Geuzaine
• [Gmsh] compatibility problems V2.5.0 & V3.0.7   Christophe Geuzaine
• [Gmsh] Defining a small circle on a truncated cone   Christophe Geuzaine
• [Gmsh] local refinement mesh (simple geometry)   Christophe Geuzaine
• [Gmsh] gmsh-4.0.1 : error during cmake   Christophe Geuzaine
• [Gmsh] Mesh refinement along line   Christophe Geuzaine
• [Gmsh] Gmsh Boolean Subtraction on .stl Files   Christophe Geuzaine
• [Gmsh] Question Gmsh in FreeCAD   Christophe Geuzaine
• [Gmsh] second order elements postprocessing   Christophe Geuzaine
• [Gmsh] Questions about removing duplicate STL   Christophe Geuzaine
• [Gmsh] Gmsh 4 format - How to associate elements with physical entities   Christophe Geuzaine
• [Gmsh] About outputting Voronoi tessellations   Christophe Geuzaine
• [Gmsh] (no subject)   Christophe Geuzaine
• [Gmsh] Msh version 2.0 or 2.2   Christophe Geuzaine
• [Gmsh] second order elements postprocessing   Christophe Geuzaine
• [Gmsh] Write individual physical surfaces, preferably from Python API   Christophe Geuzaine
• [Gmsh] Plot3d format   Christophe Geuzaine
• [Gmsh] Embedded Mesh   Christophe Geuzaine
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Christophe Geuzaine
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Christophe Geuzaine
• [Gmsh] IDs of points forming a copy of entity (in python API)   Christophe Geuzaine
• [Gmsh] Trouble with 1D meshing in gmsh-4.0.2   Christophe Geuzaine
• [Gmsh] Physical group associated with elements   Christophe Geuzaine
• [Gmsh] GMSH fails lot of tests after building   Christophe Geuzaine
• [Gmsh] Linking errors   Christophe Geuzaine
• [Gmsh] IDs of points forming a copy of entity (in python API)   Christophe Geuzaine
• [Gmsh] Linking errors   Christophe Geuzaine
• [Gmsh] second order prism elements   Christophe Geuzaine
• [Gmsh] "Tag # already exists" with OpenCASCADE engine   Christophe Geuzaine
• [Gmsh] problem with BoundingBox Volume{}   Christophe Geuzaine
• [Gmsh] Error issue   Christophe Geuzaine
• [Gmsh] Segfault when Periodic Curve is defined   Christophe Geuzaine
• [Gmsh] Error issue   Christophe Geuzaine
• [Gmsh] "Tag # already exists" with OpenCASCADE engine   Christophe Geuzaine
• [Gmsh] Tips on large, tricky models?   Christophe Geuzaine
• [Gmsh] UI window going black   Christophe Geuzaine
• [Gmsh] Error issue   Christophe Geuzaine
• [Gmsh] How to specify the surface of thin wires for meshing   Christophe Geuzaine
• [Gmsh] Spacing of boundary layer cells   Christophe Geuzaine
• [Gmsh] Periodic Line (Curve) not working for second-order elements   Christophe Geuzaine
• [Gmsh] Periodic Line (Curve) not working for second-order elements   Christophe Geuzaine
• [Gmsh] Max number of fields   Christophe Geuzaine
• [Gmsh] How do I set the random number seed with a "Mesh.Seed" option for deterministic mesh generation?   Christophe Geuzaine
• [Gmsh] Meshing Error in v4.0.4?   Christophe Geuzaine
• [Gmsh] Embedding a line in a surface   Christophe Geuzaine
• [Gmsh] building on MSYS2   Christophe Geuzaine
• [Gmsh] Gmsh SDK on Pypi   Christophe Geuzaine
• [Gmsh] Constrained Delaunay. Generating mesh using line boundaries   Christophe Geuzaine
• [Gmsh] Why does "Still negative jacobians" mean error?   Christophe Geuzaine
• [Gmsh] Unable to display an msh file   Christophe Geuzaine
• [Gmsh] Avoid duplicate entities with Geometry.OCCAutoFix = 0   Christophe Geuzaine
• [Gmsh] Avoid duplicate entities with Geometry.OCCAutoFix = 0   Christophe Geuzaine
• [Gmsh] example of using HXT- 3D Mesh function inside gmsh   Christophe Geuzaine
• [Gmsh] Gmsh-4.0.4 Volume mesh issue   Christophe Geuzaine
• [Gmsh] Gmsh-4.0.4 Volume mesh issue   Christophe Geuzaine
• [Gmsh] Higher order elements   Christophe Geuzaine
• [Gmsh] Meshing Error in v4.0.4?   Christophe Geuzaine
• [Gmsh] Error with meshing   Christophe Geuzaine
• [Gmsh] boolean with surface loop   Christophe Geuzaine
• [Gmsh] Build the mesh in my own program   Christophe Geuzaine
• [Gmsh] boolean with surface loop   Christophe Geuzaine
• [Gmsh] Problems with 2D mesh   Christophe Geuzaine
• [Gmsh] Triangulate a domain using existing point data   Christophe Geuzaine
• [Gmsh] gmsh extrusion problem   Christophe Geuzaine
• [Gmsh] Problems with 2D mesh   Christophe Geuzaine
• [Gmsh] Periodic surfaces not working for second-order elements in gmsh4   Christophe Geuzaine
• [Gmsh] Periodic surfaces not working for second-order elements in gmsh4   Christophe Geuzaine
• [Gmsh] listing elements according to which physical volume they belong to   Christophe Geuzaine
• [Gmsh] Problem with extrusion   Christophe Geuzaine
• [Gmsh] Problem with extrusion   Christophe Geuzaine
• [Gmsh] Problem with extrusion   Christophe Geuzaine
• [Gmsh] Mesh generation with a hole   Christophe Geuzaine
• [Gmsh] Issue with Hollow Volume   Christophe Geuzaine
• [Gmsh] Issue with Hollow Volume   Christophe Geuzaine
• [Gmsh] Issue with Hollow Volume   Christophe Geuzaine
• [Gmsh] Gradient plugin generating all zero vectors.   Christophe Geuzaine
• [Gmsh] Join Splines Smoothly   Christophe Geuzaine
• [Gmsh] (B)Spline perpendicular to other line   Christophe Geuzaine
• [Gmsh] [API] Get entities expressions   Christophe Geuzaine
• [Gmsh] Trouble Exporting Physical Entity Tags for Surface Elements and Volume Elements in .msh File   Christophe Geuzaine
• [Gmsh] How to control the quality of 3D tetrahedral mesh during creation ?   Christophe Geuzaine
• [Gmsh] Export stl format   Christophe Geuzaine
• [Gmsh] Bug with transfinite interface   Quentin Goestchel
• [Gmsh] Bug with transfinite interface   Quentin Goestchel
• [Gmsh] Bug with transfinite interface   Quentin Goestchel
• [Gmsh] Arbitrary stopping of gmsh   Marco Goetz
• [Gmsh] gmsh 4.0.1 mesh file write bug   Rob Govers
• [Gmsh] Extruding a 2D Surface Created in FreeCAD   James Gross
• [Gmsh] Extruding a 2D Surface Created in FreeCAD   James Gross
• [Gmsh] 2D Mesh for OpenFOAM: boundary layer field and extrusion   James Gross
• [Gmsh] 2D Mesh for OpenFOAM: boundary layer field and extrusion   James Gross
• [Gmsh] Issues with gmsh GUI after updating to 3.0.7   James Gross
• [Gmsh] Controlling the order geometrical features are merged into geo file   James Gross
• [Gmsh] 10-node tetrahedron elements   Michael Groß
• [Gmsh] Write individual physical surfaces, preferably from Python API   DILASSER Guillaume
• [Gmsh] Compatibility Problem with Gmsh and SfePy   Sean Gullette
• [Gmsh] topography issues   Riad HASSANI
• [Gmsh] topography issues   Riad HASSANI
• [Gmsh] topography issues   Riad HASSANI
• [Gmsh] Gmsh input writer for LS-DYNA   Zhidong Han
• [Gmsh] Cutting a hole out of a surface with BooleanDifference   Matthew Herman
• [Gmsh] Structured mesh between two volumes (one inside another)   Hernandez Pereira, Cristina
• [Gmsh] Error generating quadrangular structured mesh between 2 volumes   Hernandez Pereira, Cristina
• [Gmsh] Structured mesh between two volumes (one inside another)   Hernandez Pereira, Cristina
• [Gmsh] Import .geo file to .stl mantaining names of surfaces   Hernandez Pereira, Cristina
• [Gmsh] Boolean Difference Crashes Gmsh   Laura Holewa
• [Gmsh] GetDP example in Gmsh   Htet, Aung Thu
• [Gmsh] GetDP example in Gmsh   Htet, Aung Thu
• [Gmsh] Bug: Extrusion with rotation by PI creates flat surface   Daniel Huebner
• [Gmsh] Periodic Line (Curve) not working for second-order elements   Hulsen, M.A.
• [Gmsh] Periodic surfaces not working for second-order elements in gmsh4   Hulsen, M.A.
• [Gmsh] Periodic surfaces not working for second-order elements in gmsh4   Hulsen, M.A.
• [Gmsh] Crash in Delaunay Quad 2d mesh using the Gmsh-api   Konstantinos Iatridis
• [Gmsh] Crash in Delaunay Quad 2d mesh using the Gmsh-api   Konstantinos Iatridis
• [Gmsh] Structured meshes inside unstructured ones   Samuel Ingarfield
• [Gmsh] Triangular mesh problem   Mohammad Nurul Islam
• [Gmsh] Problem with duplicate triangles in STL files (Vahid Tari)   benjamin JEANTY-RUARD
• [Gmsh] Trouble Exporting Physical Entity Tags for Surface Elements and Volume Elements in .msh File   Robbie Jaeger
• [Gmsh] Trouble Exporting Physical Entity Tags for Surface Elements and Volume Elements in .msh File   Robbie Jaeger
• [Gmsh] topography issues   Stephanie Jarvis
• [Gmsh] Embedded Mesh   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] Meshing Error in v4.0.4?   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Meshing Error in v4.0.4?   Jensen, Aaron J.
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Jensen, Aaron J.
• [Gmsh] [Generate a simple mixed mesh issues]   Feilin Jia
• [Gmsh] About outputting Voronoi tessellations   Jiang, Yu
• [Gmsh] (B)Spline perpendicular to other line   Johannes
• [Gmsh] Simulation of electric field on the surface of a curved membrane   Wayne Mitchell Jr
• [Gmsh] Is there a Chamfer function in Gmsh   Paul K
• [Gmsh] Evolution of the Skin plugin   Karin&NiKo
• [Gmsh] 360 degree rotation of structured hexahedral mesh using OpenCASCADE factory leads to "findRootSourceFaceForFace() failed"   Sigve Karolius
• [Gmsh] Error issue   Kelvin
• [Gmsh] gmsh only applies first Restrict Field to 3D volume meshing?   Thomas Kiel
• [Gmsh] Non-deterministic mesh generation due to system-time dependent random seeds?   Thomas Kiel
• [Gmsh] How do I set the random number seed with a "Mesh.Seed" option for deterministic mesh generation?   Thomas Kiel
• [Gmsh] How do I set the random number seed with a "Mesh.Seed" option for deterministic mesh generation?   Thomas Kiel
• [Gmsh] boolean with surface loop   Christian Kluge
• [Gmsh] Msh version 2.0 or 2.2   Oleg Kmechak
• [Gmsh] GMSH fails lot of tests after building   Oleg Kmechak
• [Gmsh] Linking errors   Oleg Kmechak
• [Gmsh] Constrained Delaunay. Generating mesh using line boundaries   Oleg Kmechak
• [Gmsh] Self intersecting surface mesh   Yao Koutsawa
• [Gmsh] Two post-processing views: one as displacement one as vector field   Tomasz Koziara
• [Gmsh] Two post-processing views: one as displacement one as vector field   Tomasz Koziara
• [Gmsh] Visualising point data imported from MED files   Tomasz Koziara
• [Gmsh] Visualising point data imported from MED files   Tomasz Koziara
• [Gmsh] Visualising point data imported from MED files   Tomasz Koziara
• [Gmsh] Visualising point data imported from MED files   Tomasz Koziara
• [Gmsh] Visualising point data imported from MED files   Tomasz Koziara
• [Gmsh] Double moving band problem   Cássio Trapp Kruger
• [Gmsh] cylinder in a box   Miro Kuchta
• [Gmsh] cylinder in a box   Miroslav Kuchta
• [Gmsh] 3D Airfoil with boundary layer   Amod Kumar
• [Gmsh] about naming in boundaries   Sunni Kumar
• [Gmsh] about problem in physical group   Sunni Kumar
• [Gmsh] ellipsoid   Stephan Köhler
• [Gmsh] Ellipsoid with OpenCASCADE kernel   Stephan Köhler
• [Gmsh] gmsh extrude problem   Xing LIU
• [Gmsh] Different Geometry Behaviour Using Default and OpenCascade   Maximilian Langheinrich
• [Gmsh] Problem with the Boolean Operation   Matthieu Lecouvez
• [Gmsh] Spline with built-in kernel versus OpenCascade kernel   Matthieu Lecouvez
• [Gmsh] Spline with built-in kernel versus OpenCascade kernel   Matthieu Lecouvez
• [Gmsh] Spline with built-in kernel versus OpenCascade kernel   Matthieu Lecouvez
• [Gmsh] periodic pairs of internal nodes of each edge   Nan Li
• [Gmsh] periodic pairs of internal nodes of each edge   Nan Li
• [Gmsh] Problem with viewing shaded surfaces   Bernd Lindner
• [Gmsh] grouping surfaces into a surface loop and creating a volume generates unwanted surfaces   Junhui Liu
• [Gmsh] facet intersecting problems when using Compound surfaces   Junhui Liu
• [Gmsh] How to improve the quality of mesh generation   Junhui Liu
• [Gmsh] Physical group associated with elements   Xin Liu
• [Gmsh] Physical group associated with elements   Xin Liu
• [Gmsh] Having problems linking gmsh sdk libraries   Li Longhui
• [Gmsh] Having problems linking gmsh sdk libraries   Li Longhui
• [Gmsh] 答复: Having problems linking gmsh sdk libraries   Li Longhui
• [Gmsh] automated creation of tetrahedral meshes based on CAD geometry   Andre Lutz
• [Gmsh] Preservation of physical surface labels after boolean operation   Uģis Lācis
• [Gmsh] MSH file format   Rémi Mahouas
• [Gmsh] Problem creating Line Loops with the OpenCASCADE geometry kernel   Lucas Blattner Martinho
• [Gmsh] Intégration de Med 3.3.1   BURET Matthieu
• [Gmsh] 1 d & 2 d mesh   G. D. McBain
• [Gmsh] ellipsoid   G. D. McBain
• [Gmsh] Automatic building of geo scripts   G. D. McBain
• [Gmsh] Gmsh how to extract the node ID's on a given 3D Mesh Boundary Surface   G. D. McBain
• [Gmsh] MSH file format   G. D. McBain
• [Gmsh] Msh version 2.0 or 2.2   G. D. McBain
• [Gmsh] Using load_gmsh4.m to read cube.msh into Matlab   G. D. McBain
• [Gmsh] Error issue   G. D. McBain
• [Gmsh] saving the mesh for a subdomain separately   G. D. McBain
• [Gmsh] saving the mesh for a subdomain separately   G. D. McBain
• [Gmsh] saving the mesh for a subdomain separately   G. D. McBain
• [Gmsh] saving the mesh for a subdomain separately   G. D. McBain
• [Gmsh] listing elements according to which physical volume they belong to   G. D. McBain
• [Gmsh] Hexagonal Unit Cell   Philipp Metsch
• [Gmsh] matching 2D meshes   Anja Miehe
• [Gmsh] Plugin problems on Windows ?   Robert Milgate
• [Gmsh] Gmsh Boolean Subtraction on .stl Files   Mohammadi, Fariba
• [Gmsh] help finding line-point connectivity for imported geometry   Terrence Moran
• [Gmsh] Structured mesh from Refine by Splitting.   Fabio Naddei
• [Gmsh] Get 2D elements with an edge on a 1D curve?   Arjun Narayanan
• [Gmsh] gmsh ASCII file version for EDF Syrthes 4.3   Alessio Nava
• [Gmsh] gmsh ASCII file version for EDF Syrthes 4.3   Alessio Nava
• [Gmsh] Boolean Fragments. Créate 3d mesh from surfaces. Surface Loop creates aditional surfaces   Jacob Abdelfatah Ndioubnane
• [Gmsh] Boolean Fragments. Créate 3d mesh from surfaces. Surface Loop creates aditional surfaces   Jacob Abdelfatah Ndioubnane
• [Gmsh] Boolean Fragments. Créate 3d mesh from surfaces. Surface Loop creates aditional surfaces   Jacob Abdelfatah Ndioubnane
• [Gmsh] Boolean Fragments. Créate 3d mesh from surfaces. Surface Loop creates aditional surfaces   Jacob Abdelfatah Ndioubnane
• [Gmsh] Question about Progression and Bump   Nathan J. Neeteson
• [Gmsh] Question about Progression and Bump   Nathan J. Neeteson
• [Gmsh] Question about Progression and Bump   Nathan J. Neeteson
• [Gmsh] screen-shot script with range mode - custom min max   Vladimir Nikolic
• [Gmsh] gmsh / jpg / Error : Unknown output file format   Vladimir Nikolic
• [Gmsh] fixed viewpoint   Vladimir Nikolic
• [Gmsh] fixed viewpoint   Vladimir Nikolic
• [Gmsh] gmsh / jpg / Error : Unknown output file format   Vladimir Nikolic
• [Gmsh] gmsh crashing with no error message   Dominic North
• [Gmsh] Line in Surface   Bernardo Opolski
• [Gmsh] Embedding a line in a surface   Bernardo Opolski
• [Gmsh] Element neighbours   Max Orok
• [Gmsh] Plugin development   Max Orok
• [Gmsh] segfaults on linux but not windows with SDK   Max Orok
• [Gmsh] segfaults on linux but not windows with SDK   Max Orok
• [Gmsh] Having problems linking gmsh sdk libraries   Max Orok
• [Gmsh] Having problems linking gmsh sdk libraries   Max Orok
• [Gmsh] duplicate result views   Max Orok
• [Gmsh] duplicate result views   Max Orok
• [Gmsh] Recommendation for scripting in gmsh   Max Orok
• [Gmsh] bulk import of physical names?   Max Orok
• [Gmsh] Question on gmsh meshing with size determined by executable   Max Orok
• [Gmsh] gmsh 4.0.1 mesh file write bug   Max Orok
• [Gmsh] gmsh-4.0.1 : error during cmake   Max Orok
• [Gmsh] build conformal mesh from STEP file using only the GUI   Max Orok
• [Gmsh] gmsh crashing with no error message   Max Orok
• [Gmsh] Extracting the electric field data   Max Orok
• [Gmsh] Magnetic Circuit modeling   Max Orok
• [Gmsh] EXTERNAL: Re: Embedded Mesh   Max Orok
• [Gmsh] Tips on large, tricky models?   Max Orok
• [Gmsh] Fwd: Max number of fields   Max Orok
• [Gmsh] How do I set the random number seed with a "Mesh.Seed" option for deterministic mesh generation?   Max Orok
• [Gmsh] listing elements according to which physical volume they belong to   Max Orok
• [Gmsh] Gradient plugin generating all zero vectors.   Max Orok
• [Gmsh] how to specifically determine mesh size from imported STEP or BREP File ?   Benedikt Oswald
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Benedikt Oswald
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Benedikt Oswald
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Benedikt Oswald
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Benedikt Oswald
• [Gmsh] API define periodic line   Benedikt Oswald
• [Gmsh] About the homogenization of the following model   Ouajjani, Khadija
• [Gmsh] Issue with Hollow Volume   Ouajjani, Khadija
• [Gmsh] Issue with Hollow Volume   Ouajjani, Khadija
• [Gmsh] Issue with Hollow Volume   Ouajjani, Khadija
• [Gmsh] Issue with Hollow Volume   Ouajjani, Khadija
• [Gmsh] Slow opening with multiple opencascade geometries   GIORGIO PALMA
• [Gmsh] API define periodic line   Artur Palha
• [Gmsh] API define periodic line   Artur Palha
• [Gmsh] API define periodic line   Artur Palha
• [Gmsh] Version of MINGW GCC used in CYGWIN to compile?   Artur Palha
• [Gmsh] Version of MINGW GCC used in CYGWIN to compile?   Artur Palha
• [Gmsh] API define periodic line   Artur Palha
• [Gmsh] API define periodic line   Artur Palha
• [Gmsh] Version of MINGW GCC used in CYGWIN to compile?   Artur Palha
• [Gmsh] [API] Get entities expressions   Gwenaël Pallares
• [Gmsh] Gmsh 2D Boundary Layer around a bluff body   Marie-Claire Le Pape
• [Gmsh] 2.9.3 - Bug in 6th order hexa .msh saving   Marie-Claire Le Pape
• [Gmsh] Gmsh 2D Boundary Layer around a bluff body   Tommaso Pascon
• [Gmsh] Problem using stl data as holes in volumes.   Topology Pathway
• [Gmsh] Defining Physical Surface   Tom Peachey
• [Gmsh] P2 visualisation   Charles Pierre
• [Gmsh] Gmsh Python API   Alejandro Pina
• [Gmsh] Gmsh Python API   Alejandro Pina
• [Gmsh] Gmsh Python API   Alejandro Pina
• [Gmsh] Fwd: qgis-gmsh   Emilio Politti
• [Gmsh] stl with double precision   Savio Poovathingal
• [Gmsh] stl with double precision   Savio Poovathingal
• [Gmsh] spheres_visualisation   Eligiusz Postek
• [Gmsh] Curve polygonization messes up the application of a box size field   Konstantinos Poulios
• [Gmsh] Trouble with 1D meshing in gmsh-4.0.2   Pat Prodanovic
• [Gmsh] topography issues   Luis Henrique Camargo Quiroz
• [Gmsh] gmsh-4.0.1 : error during cmake   Ashwini D R
• [Gmsh] gmsh-4.0.1 : error during cmake   Ashwini D R
• [Gmsh] gmsh-4.0.1 : error during cmake   Ashwini D R
• [Gmsh] Defining dummy geometry for mesh refinement   Nathan RICKS
• [Gmsh] 3D Airfoil with boundary layer   Nathan RICKS
• [Gmsh] Spacing of boundary layer cells   Nathan RICKS
• [Gmsh] Replace fan nodes with normal triangular cells   Nathan RICKS
• [Gmsh] Plugin application on multi-mesh views   Venkata Raghunath Rachabattuni
• [Gmsh] How can I mesh a CAD model and set physical surfaces automatically?   Wesley Ranger
• [Gmsh] Parabola   Raavi M. Mohindar Rao
• [Gmsh] Create a 3D cube with each face having a physical surface   Sathyanarayan Rao
• [Gmsh] gmsh Digest, Vol 181, Issue 20   Sathyanarayan Rao
• [Gmsh] gmsh Digest, Vol 181, Issue 20   Sathyanarayan Rao
• [Gmsh] Merging two interesting surfaces as one surface   Sathyanarayan Rao
• [Gmsh] Merging two interesting surfaces as one surface   Sathyanarayan Rao
• [Gmsh] error: Cannot bind multiple faces to single tag   Sathyanarayan Rao
• [Gmsh] Error: Unknown Open Cascade entity. Could not apply Boolean operator   Sathyanarayan Rao
• [Gmsh] Error: Unknown Open Cascade entity. Could not apply Boolean operator   Sathyanarayan Rao
• [Gmsh] Line loop and Open cascade   Sathyanarayan Rao
• [Gmsh] Line loop and Open cascade   Sathyanarayan Rao
• [Gmsh] Line loop and Open cascade   Sathyanarayan Rao
• [Gmsh] Binary image meshing   Sathyanarayan Rao
• [Gmsh] OpenCascase Wire   Sathyanarayan Rao
• [Gmsh] Finding largest surface numbers within a boolean output   Sathyanarayan Rao
• [Gmsh] AttractorAnisoCurve   Sathyanarayan Rao
• [Gmsh] Gmsh: Find elements attached to a line and then treat it as new surface or volume   Sathyanarayan Rao
• [Gmsh] Join Splines Smoothly   Raposo, Henrique T
• [Gmsh] Fw: Join Splines Smoothly   Raposo, Henrique T
• [Gmsh] Identical points in triangulation   Jean-François Remacle
• [Gmsh] Increasing/Changing the number of cells   Jean-François Remacle
• [Gmsh] Gmsh produces meshes with different number of elements   Jean-François Remacle
• [Gmsh] Access to full line or surface information   Pieter Reumers
• [Gmsh] Build structured tetrahedral mesh   Octavio Castillo Reyes
• [Gmsh] Unable to load STL files   Octavio Castillo Reyes
• [Gmsh] Converting STL surface into volume   Octavio Castillo Reyes
• [Gmsh] help in reading element connectivity   Octavio Castillo Reyes
• [Gmsh] Automatic building of geo scripts   Octavio Castillo Reyes
• [Gmsh] Automatic building of geo scripts   Octavio Castillo Reyes
• [Gmsh] Build tetrahedral mesh with structured region   Octavio Castillo Reyes
• [Gmsh] Parameters for mesh refinement in 3D   Octavio Castillo Reyes
• [Gmsh] Mesh with topography   Octavio Castillo Reyes
• [Gmsh] Gmsh produces meshes with different number of elements   Octavio Castillo Reyes
• [Gmsh] Gmsh produces meshes with different number of elements   Octavio Castillo Reyes
• [Gmsh] MSH file format   Octavio Castillo Reyes
• [Gmsh] topography issues   Octavio Castillo Reyes
• [Gmsh] topography issues   Octavio Castillo Reyes
• [Gmsh] Mesh refinement along line   Octavio Castillo Reyes
• [Gmsh] Intersection between 2 tetrahedral meshes   Octavio Castillo Reyes
• [Gmsh] Stuck in infinite loop on BooleanDifference?   Gavin Ridley
• [Gmsh] Geometry from an order 2 surface mesh   Jerome Robert
• [Gmsh] MathEval field in a circle with Open Cascade   Hector Gabriel Espinoza Román
• [Gmsh] MathEval field in a circle with Open Cascade   Hector Gabriel Espinoza Román
• [Gmsh] Usage of AnalyseCurvedMesh plugin   Hector Gabriel Espinoza Román
• [Gmsh] Transfinite meshing with Curve Lenght   Hector Gabriel Espinoza Román
• [Gmsh] Usage of Octree Field   Hector Gabriel Espinoza Román
• [Gmsh] Weird results in Transfinite Volume mesh with Transfinite AlternateLeft Surfaces   Hector Gabriel Espinoza Román
• [Gmsh] Mesh smoothing in 2D   Hector Gabriel Espinoza Román
• [Gmsh] Strange Mesh using ThruSections   Leonardo Roncetti
• [Gmsh] Use physical Groups after boolean operations   Leonardo Roncetti
• [Gmsh] Gmsh curved surface   Caoimhe Rooney
• [Gmsh] How to keep edge and cell together in partitioned mesh?   Anthony Royer
• [Gmsh] Error with meshing   SRIKANTH C S
• [Gmsh] Triangulate a domain using existing point data   SRIKANTH C S
• [Gmsh] How to adaptively refined mesh using Gmsh software   CHABOT Simon - CEREMA/DTerMed/AGENCE SOPHIA/SRS
• [Gmsh] Missing surfaces in mesh when using Boolean operators   Ruth Vazquez Sabariego
• [Gmsh] Create a 3D cube with each face having a physical surface   Ruth Vazquez Sabariego
• [Gmsh] gmsh Digest, Vol 181, Issue 20   Ruth Vazquez Sabariego
• [Gmsh] Problem creating Line Loops with the OpenCASCADE geometry kernel   Ruth Vazquez Sabariego
• [Gmsh] command line options   Ruth Vazquez Sabariego
• [Gmsh] Question about Progression and Bump   Ruth Vazquez Sabariego
• [Gmsh] Double moving band problem   Ruth Vazquez Sabariego
• [Gmsh] Defining regions in Gmsh   Felix Salazar
• [Gmsh] Gmsh produces meshes with different number of elements   Felix Salazar
• [Gmsh] Gmsh produces meshes with different number of elements   Felix Salazar
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Juan Sanchez
• [Gmsh] get mesh volume   Juan Sanchez
• [Gmsh] refine existing mesh   Juan E. Sanchez
• [Gmsh] refine existing mesh   Juan E. Sanchez
• [Gmsh] issue in getting connectivity of elements   Juan E. Sanchez
• [Gmsh] half of structure disappears   Juan E. Sanchez
• [Gmsh] half of structure disappears   Juan E. Sanchez
• [Gmsh] half of structure disappears   Juan E. Sanchez
• [Gmsh] creating physical surface between two physical volumes   Juan E. Sanchez
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Juan E. Sanchez
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Juan E. Sanchez
• [Gmsh] get mesh volume   Juan E. Sanchez
• [Gmsh] get mesh volume   Juan E. Sanchez
• [Gmsh] Problem with the Boolean Operation   Juan E. Sanchez
• [Gmsh] Problem with the Boolean Operation   Juan E. Sanchez
• [Gmsh] Gmsh produces meshes with different number of elements   Juan E. Sanchez
• [Gmsh] Python demos README.txt   "José M. Sancho"
• [Gmsh] getVertex in gmsh.cpp in gmsh-git-source   "José M. Sancho"
• [Gmsh] Duplicate Nodes at a Physical Interface   Sanghavi, Chaitanya
• [Gmsh] [GMSH] Surface mesh for 3D solids   Anderson Gabriel Santiago
• [Gmsh] [GMSH] Surface mesh for 3D solids   Anderson Gabriel Santiago
• [Gmsh] Meshing algorithms and suggestions   Guilherme Saturnino
• [Gmsh] Meshing algorithms and suggestions   Guilherme Saturnino
• [Gmsh] Problem with GMSH's 2D meshing algorithm   Al Sc
• [Gmsh] 3D Remeshing with Hole   Dr. Stephan Schmidt
• [Gmsh] smoothing surfaces   Friederike Seher
• [Gmsh] Gmsh 4 format - How to associate elements with physical entities   Santiago Serebrinsky
• [Gmsh] Gmsh 4 format - How to associate elements with physical entities   Santiago Serebrinsky
• [Gmsh] (no subject)   Santiago Serebrinsky
• [Gmsh] Using the Python API under Win 10 + Msys2   Santiago Serebrinsky
• [Gmsh] Using the Python API under Win 10 + Msys2   Santiago Serebrinsky
• [Gmsh] Using the Python API under Win 10 + Msys2   Santiago Serebrinsky
• [Gmsh] mesh with interior boundaries   Deanna Michelle Sewell
• [Gmsh] sliver element in 2D   Deanna Michelle Sewell
• [Gmsh] sizing fields   Hansjoerg Seybold
• [Gmsh] GhostElements Section   Doug Shi-Dong
• [Gmsh] How to keep edge and cell together in partitioned mesh?   Orxan Shibliyev
• [Gmsh] How to keep edge and cell together in partitioned mesh?   Orxan Shibliyev
• [Gmsh] How to keep edge and cell together in partitioned mesh?   Orxan Shibliyev
• [Gmsh] How to keep edge and cell together in partitioned mesh?   Orxan Shibliyev
• [Gmsh] local refinement mesh (simple geometry)   Claire Silvani
• [Gmsh] Defining regions in Gmsh   Ajay Singh
• [Gmsh] cant export geo file as brep or step   Mark Smith
• [Gmsh] cant export geo file as brep or step   Mark Smith
• [Gmsh] otimize 3D netgen crashes   Mark Smith
• [Gmsh] second order prism elements   Mark Smith
• [Gmsh] SURFACE NODES   Giulia Soresini
• [Gmsh] ELEMENT SIZE   Giulia Soresini
• [Gmsh] Transition Mapped Quadrilateral Meshing   Atul Soti
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   John Staples
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   John Staples
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   John Staples
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   John Staples
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   John Staples
• [Gmsh] Version of MINGW GCC used in CYGWIN to compile?   John Staples
• [Gmsh] Version of MINGW GCC used in CYGWIN to compile?   John Staples
• [Gmsh] Version of MINGW GCC used in CYGWIN to compile?   John Staples
• [Gmsh] Is full/all quad recombination possible?   Bauta Steen
• [Gmsh] Magnetic Circuit modeling   Andrius Sukys
• [Gmsh] Gmsh error   RAGHURAM T.R.
• [Gmsh] UI window going black   Divya Bohra - TNW
• [Gmsh] Question Gmsh in FreeCAD   Takdanai Tapsuwan
• [Gmsh] Problem with duplicate triangles in STL files   Vahid Tari
• [Gmsh] Questions about removing duplicate STL   Vahid Tari
• [Gmsh] I have a question about Gmsh   Jeremy Theler
• [Gmsh] surface-by-surface 2d algorithm   Jeremy Theler
• [Gmsh] Automatic building of geo scripts   Jeremy Theler
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   Jeremy Theler
• [Gmsh] Attractor & Distance   Jeremy Theler
• [Gmsh] Point coordinates at python api   Jeremy Theler
• [Gmsh] Point coordinates at python api   Jeremy Theler
• [Gmsh] Surface mesh for 3D solids   Jeremy Theler
• [Gmsh] How to adaptively refined mesh using Gmsh software   Jeremy Theler
• [Gmsh] Gmsh how to extract the node ID's on a given 3D Mesh Boundary Surface   Jeremy Theler
• [Gmsh] Boolean operations   Jeremy Theler
• [Gmsh] Save .geo file from python API   Jeremy Theler
• [Gmsh] Linking errors   Jeremy Theler
• [Gmsh] Why does "Still negative jacobians" mean error?   Jeremy Theler
• [Gmsh] Retrieve indices of entities created by OCC   Bertrand Thierry
• [Gmsh] issue concerning the boolean difference of two volumes?   Bertrand Thierry
• [Gmsh] Gradient plugin generating all zero vectors.   Josh Thompson
• [Gmsh] Conformal mesh, no tetrahedra in region, BooleanDifference   Loic Thulliez
• [Gmsh] Conformal mesh, no tetrahedra in region, BooleanDifference   Loic Thulliez
• [Gmsh] Undefined Reference to 'Interface_Static' When Build API Demo   Su Tian
• [Gmsh] Undefined Reference to 'Interface_Static' When Build API Demo   Su Tian
• [Gmsh] Build API Demo Linking Static Libraries   Su Tian
• [Gmsh] .step file editing   Marco Tiberga
• [Gmsh] Need help   Moulshree Tripathi
• [Gmsh] GMSH and MED compilation in Linux-like environment in Windows   Christophe Trophime
• [Gmsh] GMSH and MED compilation in Linux-like environment in Windows   Christophe Trophime
• [Gmsh] refine existing mesh   Johannes Töger
• [Gmsh] smoothing surfaces   Johannes Töger
• [Gmsh] How to control the quality of 3D tetrahedral mesh during creation ?   Prithivirajan V
• [Gmsh] Increasing/Changing the number of cells   Matteo Dalla Vecchia
• [Gmsh] Increasing/Changing the number of cells   Matteo Dalla Vecchia
• [Gmsh] Error compiling static library   Luca Verzeroli
• [Gmsh] Fwd: Error compiling static library   Luca Verzeroli
• [Gmsh] Mesh of a bottle   Luca Verzeroli
• [Gmsh] Mesh of a bottle   Luca Verzeroli
• [Gmsh] Boundary layer extrusion   Luca Verzeroli
• [Gmsh] Mesh of a bottle part 2   Luca Verzeroli
• [Gmsh] Why do I get such a weird mesh   Alessandro Vicini
• [Gmsh] problem with version 4.0   Alessandro Vicini
• [Gmsh] Mesh file format v4   Alessandro Vicini
• [Gmsh] Mesh file format v4   Alessandro Vicini
• [Gmsh] R: Mesh file format v4   Alessandro Vicini
• [Gmsh] R: Mesh file format v4   Alessandro Vicini
• [Gmsh] (again) on v4 mesh format   Alessandro Vicini
• [Gmsh] Visualization of background field   Alessandro Vicini
• [Gmsh] problem with 2D mesh   Alessandro Vicini
• [Gmsh] command line options   Alessandro Vicini
• [Gmsh] R: command line options   Alessandro Vicini
• [Gmsh] R: command line options   Alessandro Vicini
• [Gmsh] R: Question about Progression and Bump   Alessandro Vicini
• [Gmsh] Max number of fields   Alessandro Vicini
• [Gmsh] R: Max number of fields   Alessandro Vicini
• [Gmsh] Problems with 2D mesh   Alessandro Vicini
• [Gmsh] R: Problems with 2D mesh   Alessandro Vicini
• [Gmsh] R: Problems with 2D mesh   Alessandro Vicini
• [Gmsh] R: R: Problems with 2D mesh   Alessandro Vicini
• [Gmsh] Problem with extrusion   Alessandro Vicini
• [Gmsh] R: Problem with extrusion   Alessandro Vicini
• [Gmsh] R: Problem with extrusion   Alessandro Vicini
• [Gmsh] R: Problem with extrusion   Alessandro Vicini
• [Gmsh] R: Problem with extrusion   Alessandro Vicini
• [Gmsh] Box(rectangular) version of the Frustum   Kamal Viswanath
• [Gmsh] fixing boundary mesh   Kirill Volyanskiy
• [Gmsh] Why do I get such a weird mesh   Lionel Wilhelm
• [Gmsh] Restrict anisotropic mesh   Lionel Wilhelm
• [Gmsh] surface normals in gmsh 4.0   Daniel Winklehner
• [Gmsh] surface normals in gmsh 4.0   Daniel Winklehner
• [Gmsh] IDs of points forming a copy of entity (in python API)   Marek Wojciechowski
• [Gmsh] IDs of points forming a copy of entity (in python API)   Marek Wojciechowski
• [Gmsh] IDs of points forming a copy of entity (in python API)   Marek Wojciechowski
• [Gmsh] Segfault when Periodic Curve is defined   Marek Wojciechowski
• [Gmsh] Gmsh SDK on Pypi   Marek Wojciechowski
• [Gmsh] Ellipse do not work when start and end points are symmetric wrt major axis   Shengjie Xu
• [Gmsh] 1 d & 2 d mesh   Xing Yao
• [Gmsh] Problem with periodic boundary condition for a volume extruded using wire   Changwei ZHOU
• [Gmsh] Question about ruled surface   tadej -ivan Zecevic
• [Gmsh] How to have structured mesh with holes on plane surface?   tadej -ivan Zecevic
• [Gmsh] Question   tadej -ivan Zecevic
• [Gmsh] Export .geo as .step - "No OpenCASCADE model found"   Zenker, Dr. Matthias
• [Gmsh] Export .geo as .step - "No OpenCASCADE model found"   Zenker, Dr. Matthias
• [Gmsh] Export .geo as .step - "No OpenCASCADE model found"   Zenker, Dr. Matthias
• [Gmsh] Export .geo as .step - "No OpenCASCADE model found"   Zenker, Dr. Matthias
• [Gmsh] build conformal mesh from STEP file using only the GUI   Zenker, Dr. Matthias
• [Gmsh] build conformal mesh from STEP file using only the GUI   Zenker, Dr. Matthias
• [Gmsh] How to adaptively refined mesh using Gmsh software   Jianan Zhang
• [Gmsh] Boundary Layer and wake mesh generation of a 2D airfoil   Zhao Zihao
• [Gmsh] Extracting the electric field data   mansour alawi
• [Gmsh] adaptive meshing and pos fomat   walter.steffe at alice.it
• [Gmsh] Slow opening with multiple opencascade geometries   andrew
• [Gmsh] filter out elements according to type   andrew
• [Gmsh] filter out elements according to type   andrew
• [Gmsh] single layer extrusion   andrew
• [Gmsh] bug in mesh generation   andrew
• [Gmsh] bug in mesh generation   andrew
• [Gmsh] bug in mesh generation   andrew
• [Gmsh] bug in mesh generation   andrew
• [Gmsh] Bug in Statistics window   andrew
• [Gmsh] Bug in Statistics window   andrew
• [Gmsh] RE Bogue dans les couleurs   jean pierre aubry
• [Gmsh] RE Bogue dans les couleurs   jean pierre aubry
• [Gmsh] Fwd: qgis-gmsh   jean pierre aubry
• [Gmsh] RE Gmsh error   jean pierre aubry
• [Gmsh] RE Gmsh 3.0.6   jean pierre aubry
• [Gmsh] export med 3.2 or 3.3?   jean pierre aubry
• [Gmsh] way to create a structured triangular mesh as shown in figure   ashish bhole
• [Gmsh] way to create a structured triangular mesh as shown in figure   ashish bhole
• [Gmsh] problem importing stl mesh   blubee blubeeme
• [Gmsh] Question on gmsh meshing with size determined by executable   moritz braun
• [Gmsh] Question on gmsh meshing with size determined by executable   moritz braun
• [Gmsh] Question on gmsh meshing with size determined by executable   moritz braun
• [Gmsh] Thanks a lot again!   moritz braun
• [Gmsh] Build structured tetrahedral mesh   fa201 at caramail.fr
• [Gmsh] Vim syntax file for Gmsh   fa201 at caramail.fr
• [Gmsh] Hex-Mesh problem   Martin.Raedel at dlr.de
• [Gmsh] Hex-Mesh problem   Martin.Raedel at dlr.de
• [Gmsh] Error when switching from Built-In to OpenCascade Factory   Martin.Raedel at dlr.de
• [Gmsh] Error when switching from Built-In to OpenCascade Factory   Martin.Raedel at dlr.de
• [Gmsh] Error when switching from Built-In to OpenCascade Factory   Martin.Raedel at dlr.de
• [Gmsh] Error when switching from Built-In to OpenCascade Factory   Martin.Raedel at dlr.de
• [Gmsh] Error when switching from Built-In to OpenCascade Factory   Martin.Raedel at dlr.de
• [Gmsh] GMSH and MED compilation in Linux-like environment in Windows   jean-pierre ducreux
• [Gmsh] Postprocessing Interpolation schemes   paul.carrico at free.fr
• [Gmsh] gmsh & hdf5 files: just a reflexion   paul.carrico at free.fr
• [Gmsh] help in reading element connectivity   preetyobi at gmail.com
• [Gmsh] Create Physical Volume   F.jensch at gmx.de
• [Gmsh] VoroMetal seed file   ujyhfg hfgd
• [Gmsh] [GMSH] VoroMetal seed file   ujyhfg hfgd
• [Gmsh] [SUSPICIOUS SENDER] Help on format ASCII 2   michael.asam at infineon.com
• [Gmsh] Surface mesh for 3D solids   michael.asam at infineon.com
• [Gmsh] coherence tetra and hexa mesh   gerard.fleury at inrs.fr
• [Gmsh] coherence tetra and hexa mesh   gerard.fleury at inrs.fr
• [Gmsh] Error issue   koh kelvin
• [Gmsh] Error issue   koh kelvin
• [Gmsh] Error issue   koh kelvin
• [Gmsh] Solving the current model (Electrostatics)   kvniekerk
• [Gmsh] Solving the current model (Electrostatics) - pipe_data.pro included   kvniekerk
• [Gmsh] Gmsh version 3.0 query   sowmya m
• [Gmsh] Not all mesh elements are being drawn using API   phillip mobley
• [Gmsh] issue in getting connectivity of elements   preety obi
• [Gmsh] Strategies to mesh with hexaedra   cristini paul
• [Gmsh] (no subject)   ayhan hamed saleem
• [Gmsh] OpenCASCADE wire or line loop with tag ** already exists   Jean de sauvage
• [Gmsh] Tensor display only one eigenvector ?   Jean de sauvage
• [Gmsh] Use of Gmsh to generate 3D structured meshes of airplanes   alessandro silveira
• [Gmsh] adaptive meshing and pos fomat   walter steffe
• [Gmsh] building on MSYS2   walter steffe
• [Gmsh] QMorph   swarsi
• [Gmsh] QMorph   swarsi
• [Gmsh] Ensuring conformal meshing when using geomtry from Freecad   jeremy theler
• [Gmsh] Access to full line or surface information   jeremy theler
• [Gmsh] Triangular mesh problem   jeremy theler
• [Gmsh] Meshing algorithms and suggestions   jeremy theler
• [Gmsh] node and element sparsity in msh4   jeremy theler
• [Gmsh] node and element sparsity in msh4   jeremy theler
• [Gmsh] How can I mesh a CAD model and set physical surfaces automatically?   jeremy theler
• [Gmsh] help finding line-point connectivity for imported geometry   jeremy theler
• [Gmsh] How to keep edge and cell together in partitioned mesh?   anthony.royer at uliege.be
• [Gmsh] Gmsh 2D Boundary Layer around a bluff body   cgeuzaine at uliege.be
• [Gmsh] "CMAKE" SUCCEEDS but "MAKE" FAILS for GMSH 3.0.7 (and earlier versions) with MinGW compiler toolchain (gcc 6.4.0) using CYGWIN   cgeuzaine at uliege.be
• [Gmsh] EXTERNAL: Re: Embedded Mesh   cgeuzaine at uliege.be
• [Gmsh] Periodic surfaces not working for second-order elements in gmsh4   cgeuzaine at uliege.be
• [Gmsh] Fwd: Gradient plugin generating all zero vectors.   cgeuzaine at uliege.be
• [Gmsh] second order elements postprocessing   andycapo at virgilio.it
• [Gmsh] second order elements postprocessing   andycapo at virgilio.it
• [Gmsh] Save .geo file from python API   Роман Бутов
• [Gmsh] Save .geo file from python API   Роман Бутов
• [Gmsh] Get spline/bspline/bezier intermediate points   Роман Бутов
• [Gmsh] t2.geo   Константин Лимарев
• [Gmsh] A question about gmsh   周鑫
• [Gmsh] Unable to find the boundary layer   孙思鹏
• [Gmsh] How to specify the surface of thin wires for meshing   浜津 良輔
• [Gmsh] A difference running Gmsh in command line and in GUI for 3-D mesh generation?   范荣红
• [Gmsh] About meshing quality of surface in 3D   蔣承佑
• [Gmsh] Problem consulting of gmsh   飘
• [Gmsh] I have a question about Gmsh   허준영
• [Gmsh] Error of meshing result of Gmsh   허준영

Last message date: Fri Dec 28 07:30:50 CET 2018
Archived on: Fri Dec 28 07:40:19 CET 2018

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...