[Gmsh] R: Problem with extrusion

[Alessandro Vicini]

Ok, thank you, in the meantime I had found that out.  From the manual I was supposing that should work also with the built-in geometry Kernel…

A.


Da: Christophe Geuzaine [mailto:cgeuzaine at uliege.be]
Inviato: martedì 27 novembre 2018 13:25
A: Alessandro Vicini
Cc: gmsh at onelab.info
Oggetto: Re: [Gmsh] Problem with extrusion




On 27 Nov 2018, at 11:17, Alessandro Vicini <alessandro.vicini at sitael.com<mailto:alessandro.vicini at sitael.com>> wrote:


Considering the attached geo file, why there is no surface generated by the extrusion?  Thank you.

The built-in CAD engine is quite limited for the extrusion of curves: it will not create surfaces if the origin and the destination curve are the only ones bounding the resulting surface.

You can use SetFactory("OpenCASCADE"); for such geometries:

[cid:image001.png at 01D48654.D50115E0]




Regards,

Alessandro

<extrude.geo>_______________________________________________
gmsh mailing list
gmsh at onelab.info<mailto:gmsh at onelab.info>
http://onelab.info/mailman/listinfo/gmsh

—
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine<https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.montefiore.ulg.ac.be%2F~geuzaine&e=99874c11&h=66aea005&f=y&p=y>

Free software: http://gmsh.info | http://getdp.info | http://onelab.info

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20181127/fa7805b3/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 276677 bytes
Desc: image001.png
URL: <http://onelab.info/pipermail/gmsh/attachments/20181127/fa7805b3/attachment-0001.png>