[Gmsh] How to keep edge and cell together in partitioned mesh?

[Orxan Shibliyev]

The geo file is attached. When "gmsh blade3.geo -part_split -part 9" is
applied "blade3_4.msh" has two edges which are isolated from their cells.
My version is 3.0.7.

On Mon, Mar 5, 2018 at 10:30 AM, Christophe Geuzaine <cgeuzaine at uliege.be>
wrote:

>
>
> On 4 Mar 2018, at 19:31, Orxan Shibliyev <orxan.shibli at gmail.com> wrote:
>
> Hi
>
> I do the following command:
>
> gmsh file.geo -part_split -part 9
>
> Sometimes, I get a partitioned file such that a surface edge which is
> supposed to be part of a quadrangle is stored alone. Is there a way to
> force surface edges to be stored together with their cells? In other words,
> I do not want an isolated edge whose only one point is connected to mesh
> and other point is dangling.
>
>
> Can you send a simple example where this happens?
>
>
> Thanks,
> Orhan
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh
>
>
> —
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180305/d10ab4f2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: blade3.geo
Type: application/octet-stream
Size: 2981 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20180305/d10ab4f2/attachment-0001.geo>