[Gmsh] Gmsh 2D Boundary Layer around a bluff body

[Christophe Geuzaine]

> On 23 Feb 2018, at 09:28, Tommaso Pascon <pascon.tommaso at yahoo.it> wrote:
> 
> Good morning,
> 
> I'm Tommaso Pascon a Openfoam CFD user who use Gmsh as a mesh generator software.
> 
> I'm having troubles trying to get an hybrid mesh with a structured boundary layer area around a bluff body and an unstructured region for the rest of my domain.
> 

See e.g. https://gitlab.onelab.info/gmsh/gmsh/blob/master/benchmarks/2d/BL2.geo


> I tried with boudarylayer field but i can't make it to work apparently so i decided to use the extrusion function. This is working but i can't connect the structured region with the unstructured one. It seems that these two aren't connected together and the unstructured mesh falls into the structured part.
> 
> What am I missing? I've read a lot of posts on that matter but I still can't find a solution.
> If it's needed I can upload the geo file
> 
> Thanks
> 
> Tommaso Pascon 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180224/267991e8/attachment.html>