[Gmsh] Issue with Hollow Volume

[Ouajjani, Khadija]

Thank you Christophe. Have a great day ahead.
________________________________
From: Christophe Geuzaine <cgeuzaine at uliege.be>
Sent: Monday, December 10, 2018 11:21:42 AM
To: Ouajjani, Khadija
Cc: gmsh at onelab.info
Subject: Re: [Gmsh] Issue with Hollow Volume



> On 10 Dec 2018, at 16:32, Ouajjani, Khadija <kxouajjani at shockers.wichita.edu> wrote:
>
> Thanks for the help Christophe! I will try your model.
>
> Can you guide me to any documentation related to the explicit transformation though?
> I fail to find it in the following one : http://gmsh.info/doc/texinfo/gmsh.pdf


cf.

Periodic Curve | Surface { expression-list } = { expression-list } Affine | Translate { expression-list } ;

page 67


> Gmsh
> gmsh.info
> Chapter 1: Overview 5 1 Overview Gmsh is a three-dimensional finite element grid generator with a build-in CAD engine and post-processor. Its design goal is to provide a fast, light and user-friendly meshing tool with
>
> I'm using Gmsh extensively for different models. I want to understand the concept and be able to apply it on other instances:
> From: Christophe Geuzaine <cgeuzaine at uliege.be>
> Sent: Monday, December 10, 2018 7:29:22 AM
> To: Ouajjani, Khadija
> Cc: gmsh at onelab.info
> Subject: Re: [Gmsh] Issue with Hollow Volume
>
>
> Use explicit transformations and everything will be fine:
>
>
>
> > On 10 Dec 2018, at 16:19, Ouajjani, Khadija <kxouajjani at shockers.wichita.edu> wrote:
> >
> > Sure! Thank you.
> > From: Christophe Geuzaine <cgeuzaine at uliege.be>
> > Sent: Monday, December 10, 2018 7:19:16 AM
> > To: Ouajjani, Khadija
> > Cc: gmsh at onelab.info
> > Subject: Re: [Gmsh] Issue with Hollow Volume
> >
> >
> > Can you send your .geo file?
> >
> >
> > > On 10 Dec 2018, at 16:14, Ouajjani, Khadija <kxouajjani at shockers.wichita.edu> wrote:
> > >
> > > Hello,
> > >
> > > I'm trying to mesh a volume with a hole going through it after applying Periodic Boundary Conditions. The mesh displays an error though at one of the surfaces with the hole.
> > > <pastedImage.png>
> > > Any insight is much appreciated.
> > >
> > > Regards,
> > >
> > > K.
> > >
> > > _______________________________________________
> > > gmsh mailing list
> > > gmsh at onelab.info
> > > http://onelab.info/mailman/listinfo/gmsh
> >
> > —
> > Prof. Christophe Geuzaine
> > University of Liege, Electrical Engineering and Computer Science
> > http://www.montefiore.ulg.ac.be/~geuzaine
> >
> > Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> >
> > <trytrytry_V2.geo>
>
> —
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info

—
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20181210/35efb784/attachment.html>