[Gmsh] EXTERNAL: Re: Embedded Mesh

[Jensen, Aaron J.]

I can't tell you how much I appreciate the help!  Thank you!

-----Original Message-----
From: Christophe Geuzaine [mailto:cgeuzaine at uliege.be] 
Sent: Thursday, October 11, 2018 3:29 PM
To: Jensen, Aaron J. [US-US]
Cc: gmsh at onelab.info
Subject: Re: EXTERNAL: Re: [Gmsh] Embedded Mesh


Here we go:

Merge "square";

Line Loop(1) = {1,2,3,4}; // fixed

squareWidth = 1.5;
halfSquareWidth = squareWidth/2.0;

lc = 0.3;
Point(1001) = {-halfSquareWidth,-halfSquareWidth,0.0,lc};
Point(1002) = {-halfSquareWidth, halfSquareWidth,0.0,lc};
Point(1003) = { halfSquareWidth, halfSquareWidth,0.0,lc};
Point(1004) = { halfSquareWidth,-halfSquareWidth,0.0,lc};
Line(1001) = {1004,1003};
Line(1002) = {1003,1002};
Line(1003) = {1002,1001};
Line(1004) = {1001,1004};

Line Loop(1005) = {1002,1003,1004,1001};

Plane Surface(1006) = {1005, 1}; // fixed



> On 11 Oct 2018, at 19:25, Jensen, Aaron J. <Aaron.J.Jensen at leidos.com> wrote:
> 
> Christophe,
> 
> Thank you for the fast response.  The latest snapshot works great and fixes the crash.
> 
> I am still setting up the problem incorrectly.  Here is what I have now:
> 
> 
> Merge "square";
> Line Loop(1) = {1};
> 
> squareWidth = 1.5;
> halfSquareWidth = squareWidth/2.0;
> 
> lc = 0.3;
> Point(1001) = {-halfSquareWidth,-halfSquareWidth,0.0,lc};
> Point(1002) = {-halfSquareWidth, halfSquareWidth,0.0,lc};
> Point(1003) = { halfSquareWidth, halfSquareWidth,0.0,lc};
> Point(1004) = { halfSquareWidth,-halfSquareWidth,0.0,lc};
> Line(1001) = {1004,1003};
> Line(1002) = {1003,1002};
> Line(1003) = {1002,1001};
> Line(1004) = {1001,1004};
> 
> Line Loop(1005) = {1002,1003,1004,1001};
> 
> Surface Loop(1006) = {1005, 1};
> 
> 
> I think it is close to working but I get the warning message: "1D mesh not forming a closed loop".
> 
> Any help would be greatly appreciated.
> 
> Thanks,
> Aaron
> 
> -----Original Message-----
> From: Christophe Geuzaine [mailto:cgeuzaine at uliege.be] 
> Sent: Thursday, October 11, 2018 8:11 AM
> To: Jensen, Aaron J. [US-US]
> Cc: gmsh at onelab.info
> Subject: EXTERNAL: Re: [Gmsh] Embedded Mesh
> 
> 
> 
>> On 10 Oct 2018, at 21:12, Jensen, Aaron J. <Aaron.J.Jensen at leidos.com> wrote:
>> 
>> Hello,
>> 
>> I would like to merge an existing mesh into a geometry and then mesh the unmeshed region using gmsh (something like a boundary mesh around a pre-existing mesh generated externally by another program).  Ideally, this would result in a mesh that was partially created in gmsh and partially created externally to gmsh.  Ultimately, I would like to do this in both 2D and 3D but am starting with the following in 2D:
>> 
>> 
>> 
>> Merge "square";
>> 
>> SetFactory("OpenCASCADE");
>> 
>> Surface Loop(1) = {1};
>> //sExternal = news;
>> //Rectangle(sExternal) = {0, 0, 0.0, 0.5, 0.5};
>> 
>> s1 = news;
>> Rectangle(s1) = {-0.25, -0.25, 0.0, 1.0, 1.0};
>> 
>> //BooleanDifference (2000) = { Surface{s1}; Delete; }{ Surface{sExternal}; };
>> BooleanDifference (2000) = { Surface{s1}; Delete; }{ Surface{1}; };
>> 
> 
> This cannot work: boolean operations can only be applied to CAD entities. It should not crash though - and it does not on my machine. Can you try with the latest snapshot?
> 
> You can still produce a mesh like the one you want. With the built-in engine, simply 
> 
> - load the mesh, which should contain the bounding surface mesh
> 
> - define the exterior "Surface Loop" where the interior surfaces are the bounding surfaces (discrete)
> 
> Christophe
> 
> 
>> 
>> 
>> OpenCascade doesn’t recognize surface 1 and BooleanDifference causes gmsh to crash.  I assume I am doing something wrong?  Can gmsh embed an existing mesh into a gmsh geometry or CAD model?
>> 
>> Thanks,
>> Aaron
>> <square>_______________________________________________
>> gmsh mailing list
>> gmsh at onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
> 
> — 
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> 

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info