[Gmsh] Error: Unknown Open Cascade entity. Could not apply Boolean operator

Sat Feb 17 12:59:20 CET 2018

> On 17 Feb 2018, at 12:18, Sathyanarayan Rao <sathyanarayan.rao at uclouvain.be> wrote:
> 
> Hi Christophe,
> 
> when I run your corrected file, I still get :
> 

Which version of Gmsh? The corrected file works with the latest automated snapshot.

> 
> Error   : Could not create spline
> Error   : 'Ex3.geo', line 41 : Could not add spline
> Error   : Unknown OpenCASCADE edge with tag 91
> Error   : 'Ex3.geo', line 42 : Could not add line loop
> Error   : Unknown OpenCASCADE line loop with tag 91
> Error   : 'Ex3.geo', line 43 : Could not add plane surface
> Error   : Could not create spline
> Error   : 'Ex3.geo', line 56 : Could not add spline
> Error   : Unknown OpenCASCADE edge with tag 92
> Error   : 'Ex3.geo', line 57 : Could not add line loop
> Error   : Unknown OpenCASCADE line loop with tag 92
> Error   : 'Ex3.geo', line 58 : Could not add plane surface
> Error   : Unknown OpenCASCADE entity of dimension 2 with tag 91
> Error   : 'Ex3.geo', line 60 : Could not apply boolean operator
> 
> 
> Please let me know ?
> 
> Best Regards,
> 
> Sathyanarayan Rao, PhD student
> Earth and Life Institute/Environmental Sciences (ELI-e)
> Université catholique de Louvain
> c.037, Croix du Sud 2, Louvain-la-Neuve, Belgium
> Phone: 010473827 ( intercom 73827)
> From: Christophe Geuzaine <cgeuzaine at uliege.be>
> Sent: 17 February 2018 11:24:43
> To: Sathyanarayan Rao
> Cc: gmsh at onelab.info; Mathieu Javaux
> Subject: Re: [Gmsh] Error: Unknown Open Cascade entity. Could not apply Boolean operator
>  
> 
> Your indices are wrong - see corrected file. You should probably treat the boundaries differently though.
> 
> 
> 
>> On 16 Feb 2018, at 20:01, Sathyanarayan Rao <sathyanarayan.rao at uclouvain.be <mailto:sathyanarayan.rao at uclouvain.be>> wrote:
>> 
>> Dear Gmsh team,
>> 
>> I am using a booleanunion to combine two plane surfaces generated by spline functions.
>> 
>> If I set factory to open cascade at beginning of code, then I cannot use Bspline but if I use
>> it after I define all my spline function, the booleanunion doesn't recognize the surfaces created before.
>> 
>> Can you please tell me a work around ? How do I combine these surfaces as one single surface ?
>> 
>> // mesh size description
>> 
>> cl_1   =  2;
>> cl_2   =  1;
>> 
>> // boundary points that forms Rhizotron
>> Point(1) = {-5, -10, 0, cl_1};
>> Point(2) = {5, -10, 0, cl_1};
>> Point(3) = {5, 0, 0, cl_1};
>> Point(4) = {-5, 0, 0, cl_1};
>> 
>> 
>> // lines that connect boundary
>> Line(1) = {1, 2};
>> Line(2) = {3, 2};
>> Line(3) = {4, 3};
>> Line(4) = {1, 4};
>> Line Loop(4) = {1, -2, -3, -4};
>> 
>> // Mesh Parameters
>> Mesh.CharacteristicLengthExtendFromBoundary = 0;
>> Mesh.CharacteristicLengthMax = 2;
>> 
>> 
>> // no. of spline surfaces = 2
>> 
>> X1 ={0,0,-0.184,-0.676,-0.7729,-0.8773,-0.9599,-1.194,-1.315,-1.526,-1.599,-1.679,-1.817,-2.236,-2.705,-2.963,-3.165,-3.365,-3.41,-3.499,-3.567,-3.674,-3.767,-3.864,-4.079,-4.152,-4.176,-4.175,-4.253,-4.349,-4.412,-4.455,-4.512,-4.568,-4.606,-4.641,-4.5433,-4.5083,-4.4747,-4.4217,-4.3628,-4.321,-4.2627,-4.1616,-4.0764,-4.0762,-4.0552,-3.991,-3.7831,-3.6828,-3.5911,-3.4828,-3.404,-3.3124,-3.2721,-3.0845,-2.8959,-2.6369,-2.1671,-1.7449,-1.5997,-1.52,-1.4572,-1.2531,-1.1354,-0.89561,-0.80161,-0.69478,-0.61953,-0.13723,0.088029,0.1,0};
>> Y1 ={0,-0.2636,-0.3414,-0.6213,-0.7443,-0.8732,-0.9609,-1.139,-1.218,-1.401,-1.487,-1.598,-1.771,-2.177,-2.615,-2.853,-3.031,-3.398,-3.648,-4.004,-4.126,-4.277,-4.422,-4.574,-4.851,-5.108,-5.228,-5.457,-5.685,-5.848,-5.957,-6.081,-6.195,-6.319,-6.439,-6.654,-6.6753,-6.4603,-6.3549,-6.2379,-6.1197,-5.9984,-5.8985,-5.7257,-5.4736,-5.2346,-5.1329,-4.8985,-4.6328,-4.4759,-4.333,-4.18,-4.0352,-3.6696,-3.4349,-3.0904,-2.9272,-2.6882,-2.2495,-1.8403,-1.6589,-1.5483,-1.4736,-1.2965,-1.22,-1.0375,-0.93855,-0.80673,-0.70383,-0.42979,-0.31104,1.837e-17,0};
>> 
>> 
>> // Define spline surfaces
>> 
>> LN = 91;
>> nR = #X1[ ];
>> p0  =  newp;
>> p   =  p0;
>> For i In {0:nR-1}
>> Point(newp)  =    {X1[i], Y1[i], 0, cl_2};
>> EndFor
>> p2  =  newp-1;
>> Spline(91)   =  {p:p2,p};
>> Line Loop(91) = {91};
>> Plane Surface(91) = {91};
>> 
>> X2 ={0,0.6623,1.159,1.524,1.654,1.793,1.786,1.82,1.918,2.473,2.551,2.74,2.804,2.827,2.925,2.902,2.8353,2.6431,2.5577,2.0007,1.9187,1.8859,1.8922,1.7531,1.6208,1.248,0.74707,0.084771,0};
>> Y2 ={-0.2636,-1.322,-2.116,-3,-4.022,-4.975,-5.054,-5.729,-5.859,-6.69,-6.869,-7.322,-7.666,-7.748,-7.728,-7.646,-7.2917,-6.8301,-6.6369,-5.8028,-5.7128,-5.0504,-4.9623,-4.0085,-2.9749,-2.0703,-1.269,-0.21055,-0.2636};
>> 
>> 
>> // Define spline surfaces
>> 
>> LN = 92;
>> nR = #X2[ ];
>> p0  =  newp;
>> p   =  p0;
>> For i In {0:nR-1}
>> Point(newp)  =    {X2[i], Y2[i], 0, cl_2};
>> EndFor
>> p2  =  newp-1;
>> Spline(92)   =  {p:p2,p};
>> Line Loop(92) = {92};
>> Plane Surface(92) = {92};
>> 
>> SetFactory("OpenCASCADE");
>> aa() = BooleanUnion{ Surface {91}; Delete; }{ Surface {92}; Delete; };
>> Physical Surface(1) = {aa()};
>> 
>> 
>> 
>> Best Regards,
>> 
>> Sathyanarayan Rao, PhD student
>> Earth and Life Institute/Environmental Sciences (ELI-e)
>> Université catholique de Louvain
>> c.037, Croix du Sud 2, Louvain-la-Neuve, Belgium
>> Phone: 010473827 ( intercom 73827)
>> <bound.txt>_______________________________________________
>> gmsh mailing list
>> gmsh at onelab.info <mailto:gmsh at onelab.info>
>> http://onelab.info/mailman/listinfo/gmsh <http://onelab.info/mailman/listinfo/gmsh>
> — 
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine <http://www.montefiore.ulg.ac.be/~geuzaine>
> 
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180217/ae09b62d/attachment.html>