[Gmsh] Structured mesh only in half of the domain, can you spot the error?

[Christophe Geuzaine]

> On 2 Aug 2018, at 09:03, Deep Bandivadekar <deep.bandivadekar at strath.ac.uk> wrote:
> 
> Hello,
> 
> Please take a look at the attached geo file. I couldn't spot an error.
> The mesh needs to be fully structured throughout the domain (every surface). As of now it shows unusual meshing in half of the rectangular domain, kind of two different meshes overlapping for no reason.
> 
> Can anyone spot any error? Am I missing something?

Extrude the mesh:


> 
> Thanks
> <cylinder.geo>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180802/9bd380ca/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cylinder2.geo
Type: application/octet-stream
Size: 2905 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20180802/9bd380ca/attachment.geo>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180802/9bd380ca/attachment-0001.html>