[Gmsh] duplicate result views

[Christophe Geuzaine]

Hi Max,

Indeed, it's part of the design of the solver interface: the model is loaded for each phase of the computation (initialization, parameter checking and actual run). When you just open a mesh file (with a post-processing view), it gets read twice (init and check) which leads to 2 duplicate views. You could either load a geometrical model, or (what we usually do) let the solver perform the load: you can then decide what to do depending on the calculation phase ("action").

Christophe



> On 25 Aug 2018, at 17:37, Max Orok <morok at mevex.com> wrote:
> 
> Thinking about the .opt file, of course it doesn't work the second time: the view is numbered differently. The other problem hopefully has a real cause!
> 
> On Sat, Aug 25, 2018 at 11:34 AM, Max Orok <morok at mevex.com> wrote:
> Here is your basic solver (it seems any solver will do) and a mesh file that shows the issue.
> 
> With the solver open, open the .msh file. There should be two duplicate views loaded into the GUI. 
> In addition, the .opt file (to not open the view automatically) is ignored the second time it is loaded. 
> 
> Without the solver loaded (i.e. no run button in the gui) the duplicate views don't show up. 
> I think the problem may be bound up in the database files; I had an old .db file that when loaded, did not have this problem.
> 
> On Sat, Aug 25, 2018 at 3:35 AM, Christophe Geuzaine <cgeuzaine at uliege.be> wrote:
> 
> Can you send an example?
> 
> > On 23 Aug 2018, at 22:48, Max Orok <morok at mevex.com> wrote:
> > 
> > Hi everyone, 
> > 
> > On loading simulation results into the Gmsh GUI after running a C++ solver from it, there are duplicates of each view loaded. It seems the solver is running twice, the second time loading the views? Is there anyway to disable this?
> > 
> > -- 
> > Max Orok
> > Summer Student
> > www.mevex.com
> > 
> > 
> > _______________________________________________
> > gmsh mailing list
> > gmsh at onelab.info
> > http://onelab.info/mailman/listinfo/gmsh
> 
> — 
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> 
> 
> 
> 
> -- 
> Max Orok
> Summer Student
> www.mevex.com
> 
> 
> 
> 
> 
> -- 
> Max Orok
> Summer Student
> www.mevex.com
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info