[Gmsh] bug in mesh generation

[andrew]

Hi,

Thank you for your response. The latest snapshot (18-June-2018) does not
produce problematic meshes both in windows and Linux

kind regards

andrew

2018-06-18 10:59 GMT+03:00 Christophe Geuzaine <cgeuzaine at uliege.be>:

>
> Dear Andrew,
>
> Does the latest snaphot produce the same invalid mesh? If so, can you try
> without the recombination + with the MeshAdapt 2D algorithm?
>
> Thanks,
>
> Christophe
>
> On 17 Jun 2018, at 00:20, andrew <armitatz at gmail.com> wrote:
>
> Hi,
>
> When I try to create a mesh with the following file I get an error when
> converting it with gmshToFoam. After some research I found that gmsh
> produces a problematic cell.
>
> Can this be avoided?
>
> I am using gmsh 3.0.6 and this happens both in Linux and windows.
>
> kind regards
>
> Andrew
>
> <Clipboard01.jpg><m.geo>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh
>
>
> —
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180618/2d6bdea7/attachment-0001.html>