[Gmsh] Avoid duplicate entities with Geometry.OCCAutoFix = 0

[Juan Córcoles]

Dear Christophe,

Thanks again: yes, obviously I have that option too, but I don't see any
duplicates when I merge the file. The duplicates appear after I create a
surface loop. That is what I was trying to say from the beginning. I tried
to be sure of that before sending my meesage, so that is why I used a very
simple model.

Thank you very much for your help,

On Sat, Nov 10, 2018 at 8:18 AM Christophe Geuzaine <cgeuzaine at uliege.be>
wrote:

>
> gmsh file.igs
> Tools->Options->Geometry->Curve labels/Surface labels
>
> You'll se the duplicates
>
> > On 10 Nov 2018, at 08:58, Juan Córcoles <juan.corcoles at uam.es> wrote:
> >
> > Dear Christophe,
> >
> > Thank you very much for your answer. The idea of displaying the number
> of lines or surfaces is what I thought I was doing in my examploptionse
> when I wrote:
> >
> > surfaces()=Surface "*";
> > Printf("Original Surfaces: ",surfaces());
> > lines()=Line "*";
> > Printf("Original Lines:", lines());
> >
> > after merging the IGS file. At this point, I can't see any duplicated
> entities (the number is correct), but I don't know if this is what you mean
> by displaying the curve or surface tags.
> >
> > Thank you very much again for your help,
> >
> > On Sat, Nov 10, 2018 at 7:05 AM Christophe Geuzaine <cgeuzaine at uliege.be>
> wrote:
> >
> >
> > > On 9 Nov 2018, at 18:48, Juan Córcoles <juan.corcoles at uam.es> wrote:
> > >
> > > Dear gmsh-list,
> > >
> > > I have gone through several previous posts in the list archive to find
> a way to avoid the creation of duplicate surfaces when building a volume
> from a surface loop using the opencascade kernel (assuming I am merging a
> stp/igs file). I found that setting Geometry.OCCAutoFix = 0 should do the
> trick as I don't care about orientation. However, I am unable to make it
> work since the behaviour both with this flag set to 0 or 1 looks the same.
> Please find attached a small commented example in case anyone can help me.
> >
> > Starting for IGS is a bad idea: all the entities are already duplicated
> in the file - load the IGS file alone and display e.g. the curve or surface
> tags to convince yourself. If you cannot create the geometry directly
> within Gmsh I would advise importing your geometry as a STEP file (or BREP
> if you build it with an OpenCASCADE-based CAD modeler).
> >
> > Christophe
> >
> > >
> > > Thank you very much in advance,
> > >
> > > --
> > > Juan Córcoles
> > > http://rfcas.eps.uam.es/juan.corcoles
> > >
> > > <test1.igs><test1.geo>_______________________________________________
> > > gmsh mailing list
> > > gmsh at onelab.info
> > > http://onelab.info/mailman/listinfo/gmsh
> >
> > —
> > Prof. Christophe Geuzaine
> > University of Liege, Electrical Engineering and Computer Science
> > http://www.montefiore.ulg.ac.be/~geuzaine
> >
> > Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> >
> >
> >
> > --
> > Juan Córcoles
> > http://rfcas.eps.uam.es/juan.corcoles
> >
>
> —
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
>

-- 
Juan Córcoles
http://rfcas.eps.uam.es/juan.corcoles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20181110/5908a3c2/attachment.html>