2006 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...
•    

Starting: Thu Jan 5 12:00:09 CET 2006
Ending: Fri Dec 15 19:35:31 CET 2006
Messages: 493

• [Gmsh] Gmsh error mesage   Marcela Cid Alfaro
• [Gmsh] Gmsh error mesage   Marcela Cid Alfaro
• [Gmsh] mesh   Bruno Amado
• [Gmsh] Periodic Boundary conditions   Amit.Itagi at seagate.com
• [Gmsh] Distance measurement of isosurfaces   Kalio Andre
• [Gmsh] Internal boundary points-lines   Antonio
• [Gmsh] discovered bug in gmsh   Erik Arlemark
• [Gmsh] discovered bug in gmsh   Erik Arlemark
• [Gmsh] error message   Erik Arlemark
• [Gmsh] error log-file   Erik Arlemark
• [Gmsh] structured and unstructured meshes bug   Michel Aubourg
• [Gmsh] structured and unstructured meshes bug   Michel Aubourg
• [Gmsh] structured and unstructured meshes bug   Michel Aubourg
• [Gmsh] structured and unstructured meshes bug   Michel Aubourg
• [Gmsh] 3D stretched grid   Jozsef Bakosi
• [Gmsh] reload   Jozsef Bakosi
• [Gmsh] Delaunay triangulation survey   Romain Behar
• [Gmsh] Stacked Extrusions   Laird Bolt
• [Gmsh] transfinite options   Luc Bordier
• [Gmsh] problem with structured mesh volume   Luc Bordier
• [Gmsh] Help with rewrite of mesh I/O layer   Olivier Bounhoure
• [Gmsh] About Gmsh   Luiz Guilherme Heidorn Bronzato
• [Gmsh] combined mesh/geometry file format   Joseph Brunett
• [Gmsh] Help with rewrite of mesh I/O layer   Laurent CHAMPANEY
• [Gmsh] Transfinite Surfaces   Laurent CHAMPANEY
• [Gmsh] About PostFormat version   CHENJINX
• [Gmsh] RE : 3D Mesh problem   Yann COLLETTE
• [Gmsh] Suggestion: set the direction of the normal vector of a surface   Yann COLLETTE
• [Gmsh] Help me please   Rosario Cammarota
• [Gmsh] Help with rewrite of mesh I/O layer   Andy and Dawn Carl
• [Gmsh] question about post processing mode   Jean-Francois Caudrelier
• [Gmsh] 3D stretched grid   Emmanuel Chane
• [Gmsh] GMSH Mathematica interface   French Chris
• [Gmsh] 3D graph   Jake Chrzanowski
• [Gmsh] Pb maillage Tuyau 3D   Olivier Cioni
• [Gmsh] Gmsh and GetDP   Clyde Clarke
• [Gmsh] GetDp Coupled Structural Acoustic Problems   Clyde Clarke
• [Gmsh] Bug   David Colignon
• [Gmsh] (no subject)   David Colignon
• [Gmsh] solaris compilation problem   David Colignon
• [Gmsh] aide gmsh   David Colignon
• [Gmsh] Problem meshing .STL file from CAD software   David Colignon
• [Gmsh] Problem meshing .STL file from CAD software   David Colignon
• [Gmsh] Info on tetrahedra   David Colignon
• [Gmsh] discovered bug in gmsh   David Colignon
• [Gmsh] Problem meshing .STL file from CAD software   David Colignon
• [Gmsh] Segmentation violation (invalid memory reference) during optimisation.   David Colignon
• [Gmsh] pyramid elements   David Colignon
• [Gmsh] rapport de bug   David Colignon
• [Gmsh] incoming test   David Colignon
• [Gmsh] Maillage 1D   David Colignon
• [Gmsh] Maillage 1D   David Colignon
• [Gmsh] Pb maillage Tuyau 3D   David Colignon
• [Gmsh] 3D element size   David Colignon
• [Gmsh] Problème avec -clscale et -algo tri   David Colignon
• [Gmsh] Internal boundary points-lines   David Colignon
• [Gmsh] Problem using GMSH   David Colignon
• [Gmsh] bug dans gmsh   David Colignon
• [Gmsh] Problem using GMSH   David Colignon
• [Gmsh] Gmsh error mesage   David Colignon
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   David Colignon
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   David Colignon
• [Gmsh] Mesh not displayed   David Colignon
• [Gmsh] Mesh not displayed   David Colignon
• [Gmsh] Gmsh   David Colignon
• [Gmsh] Problems with merging   David Colignon
• [Gmsh] question>1D transfini Algorithm   David Colignon
• [Gmsh] Problème de génération du maillage   David Colignon
• [Gmsh] Problem while saving a mesh   Micaël Connesson
• [Gmsh] Help with rewrite of mesh I/O layer   Romuald Conty
• [Gmsh] Huh! Panic in CrSi   Cécile DAGES
• [Gmsh] gmsh Mac os x   Pierre-Olivier Dallaire
• [Gmsh] feature request: gmsh reads input from TCP port   Al Danial
• [Gmsh] feature request: gmsh reads input from TCP port   Al Danial
• [Gmsh] feature request: gmsh reads input from TCP port   Al Danial
• [Gmsh] bug reporting...   David
• [Gmsh] Get only quad elements on a surface   David
• [Gmsh] Get only quad elements on a surface   David
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   Colignon David
• [Gmsh] Feature request/question   F.Caner
• [Gmsh] Meshing STL geometry   Alexandre Fallet
• [Gmsh] posting to mailing list,   Adel Mohamed Fathy
• [Gmsh] Heat of fusion   David Felsenthal
• [Gmsh] Mac OS X Universal Binary   David Felsenthal
• [Gmsh] gmsh compilation   Dmitry Firsov
• [Gmsh] Optimization of triangulation   Jonas Forssell
• [Gmsh] Gmsh examples?   Ben FrantzDale
• [Gmsh] Reader   Antonio Manoel Ferreira Frasson
• [Gmsh] Gmsh mesh file reader for scilab.   Antonio Manoel Ferreira Frasson
• [Gmsh] Problem meshing .STL file from CAD software   David Gasperino
• [Gmsh] Postprocessing with QUAD4 Element   Axel Gerstenberger
• [Gmsh] Souci d'installation   Christophe Geuzaine
• [Gmsh] delaunay triangulation algorithm   Christophe Geuzaine
• [Gmsh] adaptation of order in mesh   Christophe Geuzaine
• [Gmsh] Transform on Duplicata transforms the original   Christophe Geuzaine
• [Gmsh] Gmsh post-processing format: change?   Christophe Geuzaine
• [Gmsh] please, i want know better gmsh   Christophe Geuzaine
• [Gmsh] Gmesh question...   Christophe Geuzaine
• [Gmsh] bug reporting...   Christophe Geuzaine
• [Gmsh] Repository of geo files.   Christophe Geuzaine
• [Gmsh] Gmsh examples?   Christophe Geuzaine
• [Gmsh] Examples and STL surfaces.   Christophe Geuzaine
• [Gmsh] bug-report   Christophe Geuzaine
• [Gmsh] GMSH - meshing   Christophe Geuzaine
• [Gmsh] Suggestion about license issues with tirangle and tetgen   Christophe Geuzaine
• [Gmsh] Catmull-Rom   Christophe Geuzaine
• [Gmsh] Mesh with a background mesh   Christophe Geuzaine
• [Gmsh] Unable to mesh layered sphere with netgen algorithm   Christophe Geuzaine
• [Gmsh] Catmull-Rom   Christophe Geuzaine
• [Gmsh] Mesh Doubt   Christophe Geuzaine
• [Gmsh] Characteristic Length and Netgen Element Size   Christophe Geuzaine
• [Gmsh] Suggestion: Save mesh.   Christophe Geuzaine
• [Gmsh] Stream function   Christophe Geuzaine
• [Gmsh] versions higher then 1.53 do not work   Christophe Geuzaine
• [Gmsh] versions higher then 1.53 do not work   Christophe Geuzaine
• [Gmsh] versions higher then 1.53 do not work   Christophe Geuzaine
• [Gmsh] versions higher then 1.53 do not work   Christophe Geuzaine
• [Gmsh] Bug?   Christophe Geuzaine
• [Gmsh] versions higher then 1.53 do not work   Christophe Geuzaine
• [Gmsh] About citation of Gmsh in paper   Christophe Geuzaine
• [Gmsh] Problem while saving a mesh   Christophe Geuzaine
• [Gmsh] Mesh   Christophe Geuzaine
• [Gmsh] how to load a pre-defined 2D mesh   Christophe Geuzaine
• [Gmsh] STl import to .geo   Christophe Geuzaine
• [Gmsh] versions higher then 1.53 do not work   Christophe Geuzaine
• [Gmsh] versions higher then 1.53 do not work   Christophe Geuzaine
• [Gmsh] transfinite options   Christophe Geuzaine
• [Gmsh] question about post processing mode   Christophe Geuzaine
• [Gmsh] File transfer between client and solver   Christophe Geuzaine
• [Gmsh] About Gmsh   Christophe Geuzaine
• [Gmsh] message to socket client   Christophe Geuzaine
• [Gmsh] message to socket client   Christophe Geuzaine
• [Gmsh] message to socket   Christophe Geuzaine
• [Gmsh] message to socket   Christophe Geuzaine
• [Gmsh] interactive.cpp   Christophe Geuzaine
• [Gmsh] compiling gmsh on Aix gets error   Christophe Geuzaine
• [Gmsh] 2nd order prism - Post-processing   Christophe Geuzaine
• [Gmsh] GMSH / GetDP   Christophe Geuzaine
• [Gmsh] Bug in gmsh 1.63.2   Christophe Geuzaine
• [Gmsh] GMSH postprocessing   Christophe Geuzaine
• [Gmsh] Bug in gmsh 1.63.2   Christophe Geuzaine
• [Gmsh] feature request: gmsh reads input from TCP port   Christophe Geuzaine
• [Gmsh] 8-node quadrilateral element in gmsh   Christophe Geuzaine
• [Gmsh] feature request: gmsh reads input from TCP port   Christophe Geuzaine
• [Gmsh] How to extract surface number from Extrude   Christophe Geuzaine
• [Gmsh] Extract/highlight geometry edges   Christophe Geuzaine
• [Gmsh] Binary files   Christophe Geuzaine
• [Gmsh] Stacked Extrusions   Christophe Geuzaine
• [Gmsh] structured and unstructured meshes bug   Christophe Geuzaine
• [Gmsh] GMSH: Configure other Solvers & Custom Filters (Corrected)   Christophe Geuzaine
• [Gmsh] structured and unstructured meshes bug   Christophe Geuzaine
• [Gmsh] feature request: gmsh reads input from TCP port   Christophe Geuzaine
• [Gmsh] feature request: gmsh reads input from TCP port   Christophe Geuzaine
• [Gmsh] Could not make   Christophe Geuzaine
• [Gmsh] Please help   Christophe Geuzaine
• [Gmsh] Strange behaviour with extrude and physical geometry   Christophe Geuzaine
• [Gmsh] 3D array   Christophe Geuzaine
• [Gmsh] (no subject)   Christophe Geuzaine
• [Gmsh] 3D array   Christophe Geuzaine
• [Gmsh] Bug   Christophe Geuzaine
• [Gmsh] Extruded Surfaces' ID   Christophe Geuzaine
• [Gmsh] magnetic field   Christophe Geuzaine
• [Gmsh] Problems with Evaluate-plugin   Christophe Geuzaine
• [Gmsh] solaris compilation problem   Christophe Geuzaine
• [Gmsh] Feature request/question   Christophe Geuzaine
• [Gmsh] meshing problem   Christophe Geuzaine
• [Gmsh] [Question] 2D_Mesh.cpp   Christophe Geuzaine
• [Gmsh] gmsh seg fault   Christophe Geuzaine
• [Gmsh] bug report   Christophe Geuzaine
• [Gmsh] Meshing STL geometry   Christophe Geuzaine
• [Gmsh] meshing problem   Christophe Geuzaine
• [Gmsh] load_gmsh.sci file   Christophe Geuzaine
• [Gmsh] compilation problem with gmsh version 1.60.1   Christophe Geuzaine
• [Gmsh] parametric surface ?   Christophe Geuzaine
• [Gmsh] discovered bug in gmsh   Christophe Geuzaine
• [Gmsh] curved mesh?   Christophe Geuzaine
• [Gmsh] possible bug dans Gmsh   Christophe Geuzaine
• [Gmsh] [Gmsh-announce] New Gmsh release: 1.65   Christophe Geuzaine
• [Gmsh] problem with structured mesh volume   Christophe Geuzaine
• [Gmsh] 2D structured mesh - surface with curve lines   Christophe Geuzaine
• [Gmsh] rapport de bug   Christophe Geuzaine
• [Gmsh] elements orientation   Christophe Geuzaine
• [Gmsh] extrude   Christophe Geuzaine
• [Gmsh] gmsh newbie - OpenFOAM export   Christophe Geuzaine
• [Gmsh] Iso-values and filled iso-values.   Christophe Geuzaine
• [Gmsh] pyramid elements   Christophe Geuzaine
• [Gmsh] pre-defined nodes on 1 or 2 surfaces   Christophe Geuzaine
• [Gmsh] gmsh1.65.0 Irix-patch, bug   Christophe Geuzaine
• [Gmsh] How to make a hole in a volume?   Christophe Geuzaine
• [Gmsh] Second Order Elements on Curved Surfaces   Christophe Geuzaine
• [Gmsh] structured mesh in wedge.   Christophe Geuzaine
• [Gmsh] Gmsh on Intel mac   Christophe Geuzaine
• [Gmsh] bug (?) in gmsh-1.65   Christophe Geuzaine
• [Gmsh] 3D stretched grid   Christophe Geuzaine
• [Gmsh] gmsh1.65.0 Irix-patch   Christophe Geuzaine
• [Gmsh] splines in 3-d space   Christophe Geuzaine
• [Gmsh] import CAD geom with multiple volumes   Christophe Geuzaine
• [Gmsh] post-processing: how to integrate over physical surface?   Christophe Geuzaine
• [Gmsh] help   Christophe Geuzaine
• [Gmsh] error in tutorial t2.geo   Christophe Geuzaine
• [Gmsh] (no subject)   Christophe Geuzaine
• [Gmsh] import in CFD++   Christophe Geuzaine
• [Gmsh] Section mesh   Christophe Geuzaine
• [Gmsh] Gmsh help!   Christophe Geuzaine
• [Gmsh] Quadtratic tets   Christophe Geuzaine
• [Gmsh] parallel version of gmsh   Christophe Geuzaine
• [Gmsh] Gmsh and GetDP   Christophe Geuzaine
• [Gmsh] bug (?) in gmsh-1.65   Christophe Geuzaine
• [Gmsh] Reader   Christophe Geuzaine
• [Gmsh] Help with rewrite of mesh I/O layer   Christophe Geuzaine
• [Gmsh] reload   Christophe Geuzaine
• [Gmsh] Second order tets?   Christophe Geuzaine
• [Gmsh] Help with rewrite of mesh I/O layer   Christophe Geuzaine
• [Gmsh] Help with rewrite of mesh I/O layer   Christophe Geuzaine
• [Gmsh] About PostFormat version   Christophe Geuzaine
• [Gmsh] Use of interpolation_scheme with multiple time steps   Christophe Geuzaine
• [Gmsh] Print Background in ps export   Christophe Geuzaine
• [Gmsh] Distance measurement of isosurfaces   Christophe Geuzaine
• [Gmsh] Dilate   Christophe Geuzaine
• [Gmsh] 2D time plots   Christophe Geuzaine
• [Gmsh] 2D time plots   Christophe Geuzaine
• [Gmsh] 2D time plots   Christophe Geuzaine
• [Gmsh] bug dans gmsh   Christophe Geuzaine
• [Gmsh] types of imported files   Christophe Geuzaine
• [Gmsh] ... electric field lines ...   Christophe Geuzaine
• [Gmsh] METIS and Gmsh   Christophe Geuzaine
• [Gmsh] Bug Report   Christophe Geuzaine
• [Gmsh] question...   Christophe Geuzaine
• [Gmsh] Measure distances between points.   Christophe Geuzaine
• [Gmsh] Distance measurement of isosurfaces   Christophe Geuzaine
• [Gmsh] ... electric field lines ...   Christophe Geuzaine
• [Gmsh] gmsh2 and opencascade   Christophe Geuzaine
• [Gmsh] ... electric field lines ...   Christophe Geuzaine
• [Gmsh] gmsh2 and opencascade   Christophe Geuzaine
• [Gmsh] File size limit in gmsh?   Christophe Geuzaine
• [Gmsh] GMSH   Christophe Geuzaine
• [Gmsh] ... electric field lines ...   Christophe Geuzaine
• [Gmsh] File size limit in gmsh?   Christophe Geuzaine
• [Gmsh] mesh order from script   Christophe Geuzaine
• [Gmsh] meshing of 1D elements   Christophe Geuzaine
• [Gmsh] posting problem   Christophe Geuzaine
• [Gmsh] Optimization of triangulation   Christophe Geuzaine
• [Gmsh] Gmsh & OpenCascade   Christophe Geuzaine
• [Gmsh] bug   Christophe Geuzaine
• [Gmsh] Mac OS X Universal Binary   Christophe Geuzaine
• [Gmsh] bugReport_gmsh_error   Christophe Geuzaine
• [Gmsh] Extrusion and Physical   Christophe Geuzaine
• [Gmsh] Transfinite Surfaces   Christophe Geuzaine
• [Gmsh] Parameters automaticaly replaced   Christophe Geuzaine
• [Gmsh] Mesh over-refinements inside 2D geometry   Christophe Geuzaine
• [Gmsh] visualization question   Christophe Geuzaine
• [Gmsh] some comments on Gmsh   Christophe Geuzaine
• [Gmsh] Parameters automaticaly replaced   Christophe Geuzaine
• [Gmsh] [gmsh] the mesh is at the wrong place   Christophe Geuzaine
• [Gmsh] Parameters automaticaly replaced   Christophe Geuzaine
• [Gmsh] Plugin(Transform).T2 Parser Problem   Christophe Geuzaine
• [Gmsh] Gmsh binaries beyond version 1.65?   Christophe Geuzaine
• [Gmsh] Mesh problems   Christophe Geuzaine
• [Gmsh] TET meshing from TRI ?   Christophe Geuzaine
• [Gmsh] Assigning material properties to a mesh   Christophe Geuzaine
• [Gmsh] gmsh Mac os x   Christophe Geuzaine
• [Gmsh] Problems to refine near a vertex of a L-shaped domain   Christophe Geuzaine
• [Gmsh] gmsh Mac os x   Christophe Geuzaine
• [Gmsh] Mesh by physical   Christophe Geuzaine
• [Gmsh] Mesh by physical   Christophe Geuzaine
• [Gmsh] Mesquite - Mesh Quality Improvement Toolkit   Pedro Giffuni
• [Gmsh] FYI, Interesting Libraries from Sandia: CGM, Verdict   Pedro F. Giffuni
• [Gmsh] Bug   Mart Gommans
• [Gmsh] Question about structured grid   Stephen Guzik
• [Gmsh] bug dans gmsh   Lucie Gérard
• [Gmsh] parallel version of gmsh   Magnus Hagdorn
• [Gmsh] meshing of 1D elements   Magnus Hagdorn
• [Gmsh] Binary files   Jeremiah Hall
• [Gmsh] Gmsh   Jeffrey Hannam
• [Gmsh] (no subject)   Alex Hartov
• [Gmsh] Print Background in ps export   Tammo Heeren
• [Gmsh] ... electric field lines ...   Tammo Heeren
• [Gmsh] ... electric field lines ...   Tammo Heeren
• [Gmsh] gmsh newbie - OpenFOAM export   Pei-Ying Hsieh
• [Gmsh] 2D structured mesh - surface with curve lines   Pei-Ying Hsieh
• [Gmsh] pyramid elements   Pei-Ying Hsieh
• [Gmsh] pre-defined nodes on 1 or 2 surfaces   Pei-Ying Hsieh
• [Gmsh] import CAD geom with multiple volumes   Pei-Ying Hsieh
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   William Hunter
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   William Hunter
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   William Hunter
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   William Hunter
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   William Hunter
• [Gmsh] Gmsh & OpenCascade   William Hunter
• [Gmsh] Gmsh & OpenCascade   William Hunter
• [Gmsh] Gmsh & OpenCascade   William Hunter
• [Gmsh] Compile Error; Platform: Ubuntu Dapper (AMD64)   William Hunter
• [Gmsh] Applying Loads and Constraints   William Hunter
• [Gmsh] Applying Loads and Constraints   William Hunter
• [Gmsh] Extruded Surfaces' ID   Andrew Isaverdian
• [Gmsh] GMSH input data question   Enrique Izaguirre
• [Gmsh] error in tutorial t2.geo   Jan-Pieter Jacobs
• [Gmsh] Meshing and rendering a deformed polyhedron   Mattijs Janssens
• [Gmsh] Problems with Evaluate-plugin   Thomas Jung
• [Gmsh] some comments on Gmsh   Berger Karl
• [Gmsh] (no subject)   Chris Kees
• [Gmsh] gmsh1.65.0 Irix-patch, bug   Philip Kelleners
• [Gmsh] gmsh1.65.0 Irix-patch   Philip Kelleners
• [Gmsh] 3D element size   Dries Kimpe
• [Gmsh] ... electric field lines ...   Matt Koch
• [Gmsh] ... electric field lines ...   Matt Koch
• [Gmsh] ... electric field lines ...   Matt Koch
• [Gmsh] Second Order Elements on Curved Surfaces   Jacques Kools
• [Gmsh] File Formats for newer Windows executables   Jacques Kools
• [Gmsh] Dilate   Jacques Kools
• [Gmsh] types of imported files   Steve Labbé
• [Gmsh] (no subject)   Simonet Laurence
• [Gmsh] METIS and Gmsh   B. Lazarov
• [Gmsh] GMsh bug report   Lee, Kuantsai
• [Gmsh] magnetic field   Peter Van Leemput
• [Gmsh] compiling   Peter Van Leemput
• RE : [Gmsh] 3D Mesh problem   Patrick Lefevre
• [Gmsh] compiling gmsh on Aix gets error   Tiong Lim
• [Gmsh] How to make a hole in a volume?   Hengjin Liu
• [Gmsh] Mesh Doubt   Guilherme Lopes
• [Gmsh] Mesh   Guilherme Lopes
• [Gmsh] possible bug dans Gmsh   Raoul Lorphevre
• [Gmsh] possible bug dans Gmsh   Raoul Lorphevre
• [Gmsh] Mac OS X Universal Binary   Jack Loveless
• [Gmsh] reporting possible bug   Sandris Lācis
• [Gmsh] 8-node quadrilateral element in gmsh   MD1704 at mclink.it
• [Gmsh] Second order tets?   Srinath Madhavan
• [Gmsh] please, i want know better gmsh   Cristiano Meira Magalhães
• [Gmsh] Mesh by physical   Duane Malcolm
• [Gmsh] Gmsh post-processing format: change?   Laurent Malod-Panisset
• [Gmsh] gmsh seg fault   Alan Matschke
• [Gmsh] question>1D transfini Algorithm   Christelle Piantsop Mboo
• [Gmsh] question>1D transfini Algorithm   Christelle Piantsop Mboo
• [Gmsh] pipe with several outlets   Alfonso Medina
• [Gmsh] versions higher then 1.53 do not work   Alfonso Medina
• [Gmsh] versions higher then 1.53 do not work   Alfonso Medina
• [Gmsh] [Fwd: Re: versions higher then 1.53 do not work]   Alfonso Medina
• [Gmsh] versions higher then 1.53 do not work   Alfonso Medina
• [Gmsh] STl import to .geo   Alfonso Medina
• [Gmsh] versions higher then 1.53 do not work   Alfonso Medina
• [Gmsh] versions higher then 1.53 do not work   Alfonso Medina
• [Gmsh] Bug in gmsh 1.63.2   Alfonso Medina
• [Gmsh] Problems with merging   Jovana Micovic
• [Gmsh] Could not make   PRAKASH.V
• [Gmsh] Please help   PRAKASH.V
• [Gmsh] meshing problem   William Pao
• [Gmsh] Plugin(Transform).T2 Parser Problem   Radek Pecher
• [Gmsh] Mesh problems   Corti Philippe
• [Gmsh] [Question] 2D_Mesh.cpp   Pierre-Antoine.Faure at andra.fr
• [Gmsh] Maillage 1D   Pierre-Antoine.Faure at andra.fr
• [Gmsh] Fwd: Accepted gmsh 1.62.0-1 (source i386)   Christophe Prud'homme
• [Gmsh] Fwd: Accepted gmsh 1.63.2-1 (source i386)   Christophe Prud'homme
• [Gmsh] About citation of Gmsh in paper   Christophe Prud'homme
• [Gmsh] Fwd: Accepted gmsh 1.64.0-1 (source i386)   Christophe Prud'homme
• [Gmsh] Fwd: Accepted gmsh 1.64.1-1 (source i386)   Christophe Prud'homme
• [Gmsh] [Gmsh-announce] New Gmsh release: 1.65   Christophe Prud'homme
• [Gmsh] Fwd: Accepted gmsh 1.65.0-1 (source i386)   Christophe Prud'homme
• [Gmsh] [gmsh] the mesh is at the wrong place   Alessio Quaglino
• [Gmsh] how to load a pre-defined 2D mesh   Romain Quey
• [Gmsh] compilation problem with gmsh version 1.60.1   Romain Quey
• [Gmsh] Help with rewrite of mesh I/O layer   Romain Quey
• [Gmsh] Mesh over-refinements inside 2D geometry   Romain Quey
• [Gmsh] Problem using GMSH   Livio RIZZO
• [Gmsh] question...   Sadasiva Rao
• [Gmsh] post-processing: how to integrate over physical surface?   Ingmar Rauschert
• [Gmsh] 3D array   Ingo Reinhold
• [Gmsh] Souci d'installation   Marion Romain
• [Gmsh] some comments on Gmsh   Dr.-Ing. Ingo D. Rullhusen
• [Gmsh] File transfer between client and solver   Jose M. Sancho
• [Gmsh] message to socket client   Jose M. Sancho
• [Gmsh] message to socket   Jose M. Sancho
• [Gmsh] interactive.cpp   Jose M. Sancho
• [Gmsh] interactive.cpp   Jose M. Sancho
• [Gmsh] gmsh2 and opencascade   Jose M. Sancho
• [Gmsh] mesh order from script   Jose M. Sancho
• [Gmsh] Applying Loads and Constraints   Jose M. Sancho
• [Gmsh] [GMSH] crash on remote X11 linux-macosx   Jose M. Sancho
• [Gmsh] MSH] crash on remote X11 linux-macosx corrected   Jose M. Sancho
• [Gmsh] GMSH - meshing   Raya Schindmes
• [Gmsh] Gmesh question...   Antonio Schreurs
• [Gmsh] rapport de bug   Benoit Serre
• [Gmsh] visualization question   John Sheehan
• [Gmsh] GMSH / GetDP   Warren Sher
• [Gmsh] Gmsh Using Cygwin "Badly"   Gary R. Van Sickle
• [Gmsh] 2nd order prism - Post-processing   Viviane Cristine Silva
• [Gmsh] bugReport_gmsh_error   Rogerio Soares
• [Gmsh] Use of interpolation_scheme with multiple time steps   Stefan Sollerer
• [Gmsh] Gmsh on Intel mac   Laurent Stainier
• [Gmsh] gmsh   Laurent Stainier
• [Gmsh] Segmentation violation (invalid memory reference) during optimisation.   Mark Starnes
• [Gmsh] bug-report   Bernhard Stoevesandt
• [Gmsh] Mesh not displayed   Bernhard Stoevesandt
• [Gmsh] Unable to mesh layered sphere with netgen algorithm   Julian Swartz
• [Gmsh] Characteristic Length and Netgen Element Size   Julian Swartz
• [Gmsh] Extrusion and Physical   Nicolas TARDIEU
• [Gmsh] gmsh&getDP   Thomas.Bock at ptb.de
• [Gmsh] bug (?) in gmsh-1.65   Cristian Tibirna
• [Gmsh] bug (?) in gmsh-1.65   Cristian Tibirna
• [Gmsh] File size limit in gmsh?   Christophe Trophime
• [Gmsh] File size limit in gmsh?   Christophe Trophime
• [Gmsh] scilab   Gürsoy Turan
• [Gmsh] load_gmsh.sci file   Gürsoy Turan
• [Gmsh] curved mesh?   Lev Vaisman
• [Gmsh] elements orientation   Lev Vaisman
• [Gmsh] Meshing and rendering a deformed polyhedron   Nicolas Vanderesse
• [Gmsh] contact   Renato Vargas
• [Gmsh] Bug in gmsh 1.63.2   Clemens Verhoosel
• [Gmsh] mesh format converter   Alessandro Vicini
• [Gmsh] Strange behaviour with extrude and physical geometry   Jean Vis
• [Gmsh] Strange behaviour with extrude and physical geometry   Jean Vis
• [Gmsh] Mesh Doubt   VnPenguin
• [Gmsh] parametric surface ?   VnPenguin
• [Gmsh] rpm package for FC5   VnPenguin
• [Gmsh] TET meshing from TRI ?   Vnpenguin
• [Gmsh] Bug Report   Wu, Xunlei
• [Gmsh] Parameters automaticaly replaced   Collette Yann
• [Gmsh] Scilab Scripts   Collette Yann
• [Gmsh] Parameters automaticaly replaced   Collette Yann
• [Gmsh] Parameters automaticaly replaced   Collette Yann
• [Gmsh] Parameters automaticaly replaced   Collette Yann
• [Gmsh] 3D Mesh problem   Collette Yann
• [Gmsh] Question about structured grid   Xuanhang Zhang
• [Gmsh] Catmull-Rom   Nikola Zizkovsky
• [Gmsh] Catmull-Rom   Nikola Zizkovsky
• [Gmsh] GMSH postprocessing   an_koch at arcor.de
• [Gmsh] Problem in 1D mesh ???   mohamed arhab
• [Gmsh] bug   julio aya
• [Gmsh] reloading surface numbers   carlos bahamondes
• [Gmsh] reloading surface numbers   carlos bahamondes
• [Gmsh] Repository of geo files.   billy at dem.uminho.pt
• [Gmsh] Examples and STL surfaces.   billy at dem.uminho.pt
• [Gmsh] Suggestion: Save mesh.   billy at dem.uminho.pt
• [Gmsh] Stream function   billy at dem.uminho.pt
• [Gmsh] Bug?   billy at dem.uminho.pt
• [Gmsh] Extract/highlight geometry edges   billy at dem.uminho.pt
• [Gmsh] Fwd: Re: Extract/highlight geometry edges   billy at dem.uminho.pt
• [Gmsh] Extract/highlight geometry edges   billy at dem.uminho.pt
• [Gmsh] Iso-values and filled iso-values.   billy at dem.uminho.pt
• [Gmsh] (no subject)   billy at dem.uminho.pt
• [Gmsh] Fwd: jpeg library   billy at dem.uminho.pt
• [Gmsh] configure bug.   billy at dem.uminho.pt
• [Gmsh] BDS.cpp   billy at dem.uminho.pt
• [Gmsh] Section mesh   billy at dem.uminho.pt
• [Gmsh] 2D time plots   billy at dem.uminho.pt
• [Gmsh] 2D time plots   billy at dem.uminho.pt
• [Gmsh] Measure distances between points.   billy at dem.uminho.pt
• [Gmsh] Question about structured grid   billy at dem.uminho.pt
• [Gmsh] Question about structured grid   billy at dem.uminho.pt
• [Gmsh] 2D time plots   billy at dem.uminho.pt
• [Gmsh] 2D time plots   billy at dem.uminho.pt
• [Gmsh] METIS and Gmsh   billy at dem.uminho.pt
• [Gmsh] METIS and Gmsh   billy at dem.uminho.pt
• [Gmsh] gmsh2 and opencascade   billy at dem.uminho.pt
• [Gmsh] Gmsh & OpenCascade   billy at dem.uminho.pt
• [Gmsh] Curl of a vector field   billy at dem.uminho.pt
• [Gmsh] Problème de génération du maillage   albert castel
• [Gmsh] bug report   mark center
• [Gmsh] GMSH   bernard courbet
• [Gmsh] help   g.ascanio at libero.it
• [Gmsh] import in CFD++   g.ascanio at libero.it
• [Gmsh] Info on mesh 3d   giuseppe
• [Gmsh] Info on tetrahedra   giuseppe
• [Gmsh] Bug   ingo at pdx.edu
• [Gmsh] GMSH: Configure other Solvers & Custom Filters   jmb365
• [Gmsh] Gmsh binaries beyond version 1.65?   jmb365
• [Gmsh] Assigning material properties to a mesh   jmb365
• [Gmsh] GMSH: Configure other Solvers & Custom Filters (Corrected)   ks3597
• [Gmsh] splines in 3-d space   Durufle marc
• [Gmsh] Problems to refine near a vertex of a L-shaped domain   Durufle marc
• [Gmsh] solaris compilation problem   michael
• [Gmsh] solaris compilation problem   michael
• [Gmsh] solaris compilation problem   michael
• [Gmsh] compiling   michael
• [Gmsh] extrude   walid miladi
• [Gmsh] versions higher then 1.53 do not work   milan.hokr at email.cz
• [Gmsh] versions higher then 1.53 do not work   milan.hokr at email.cz
• [Gmsh] ... electric field lines ...   mkoch at gvtc.com
• [Gmsh] ... electric field lines ...   mkoch at gvtc.com
• [Gmsh] ... electric field lines ...   mkoch at gvtc.com
• [Gmsh] Suggestion about license issues with tirangle and tetgen   pfgshield-freebsd at yahoo.com
• [Gmsh] Help with rewrite of mesh I/O layer   pfgshield-freebsd at yahoo.com
• [Gmsh] Quadtratic tets   Zippy pinhead
• [Gmsh] (no subject)   quey at emse.fr
• [Gmsh] (no subject)   remacle
• [Gmsh] Postprocessing with QUAD4 Element   remacle
• [Gmsh] Delaunay triangulation survey   remacle
• [Gmsh] structured mesh in wedge.   mark starnes
• [Gmsh] posting problem   walter steffe
• [Gmsh] posting problem   walter steffè
• [Gmsh] aide gmsh   cerqueira stéphane
• [Gmsh] How to extract surface number from Extrude   thierry.gilles at tiscali.nl
• [Gmsh] Gmsh help!   yiyan
• [Gmsh] About citation of Gmsh in paper   zhoujun

Last message date: Fri Dec 15 19:35:31 CET 2006
Archived on: Fri Dec 15 19:46:45 CET 2006

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...