[Gmsh] 2D structured mesh - surface with curve lines
Pei-Ying Hsieh
pei-ying.hsieh.b at bayer.com
Thu May 18 03:10:27 CEST 2006
Dear GMSH users:
I am trying to mesh a 2D surface (consists of 2 straight lines and 2
curcular arc) using structred mesh (will be all Quad). There is no
problem if all 4 sides (lines) are striaght lines. But, circular arc
seems to be a problem. Is there a way to do this? Thanks a lot if you
can take a look at this!
Pei
-----------------------------------------
lc = 0.2;
Point(4) = {0, 1, 0, lc};
Point(5) = {0, 0, 0, lc};
Point(6) = {-1, 0, 0, lc};
Point(7) = {-2, 0, 0, lc};
Point(8) = {0, 2, 0, lc};
Line (7) = {8, 4};
Line (8) = {6, 7};
Circle (9) = {7, 5, 8};
Circle (10) = {4, 5, 6};
Line Loop(11) = {7, 10, 8, 9};
Plane Surface(12) = {11};
Transfinite Line{7:10} = 6;
Transfinite Surface{12} = {7, 10, 8, 9};
Recombine Surface {12};
_______________________________________________________________________________________________
The information contained in this e-mail is for the exclusive use of the intended recipient(s) and may be confidential, proprietary, and/or legally privileged. Inadvertent disclosure of this message does not constitute a waiver of any privilege. If you receive this message in error, please do not directly or indirectly use, print, copy, forward, or disclose any part of this message. Please also delete this e-mail and all copies and notify the sender. Thank you.
For alternate languages please go to http://bayerdisclaimer.bayerweb.com
_______________________________________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20060517/f74b7aac/attachment.html>