2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...
•    

Starting: Wed Jan 4 20:55:22 CET 2012
Ending: Mon Dec 31 09:34:31 CET 2012
Messages: 796

• [Gmsh] stretching triangular elements   Hanieh Mirzaee
  • [Gmsh] stretching triangular elements   jean pierre aubry
    • [Gmsh] stretching triangular elements   Hanieh Mirzaee
  • [Gmsh] stretching triangular elements   jean pierre aubry
  • [Gmsh] stretching triangular elements   jean pierre aubry
    • [Gmsh] stretching triangular elements   Hanieh Mirzaee
      • [Gmsh] stretching triangular elements   Christophe Geuzaine
• [Gmsh] troube with 1:1 button   jean pierre aubry
• [Gmsh] Meshing thin, curved solids   Tibi Chelcea
  • [Gmsh] Meshing thin, curved solids   jean pierre aubry
• [Gmsh] Symmetry command, simple example please?   Richard Crozier
  • [Gmsh] Symmetry command, simple example please?   Richard Crozier
• [Gmsh] Define physical entities from imported CAD file   Andrea Palazzi
• [Gmsh] pb meshing stp file   trophime
• [Gmsh] Different element sizes in different spatial directions?   Martin Meyer
  • [Gmsh] Different element sizes in different spatial directions?   Ruth V. Sabariego
    • [Gmsh] Different element sizes in different spatial directions?   Martin Meyer
      • [Gmsh] Different element sizes in different spatial directions?   Hanieh Mirzaee
    • [Gmsh] Different element sizes in different spatial directions?   Martin Meyer
• [Gmsh] Higher order shape functions in gmsh / getdp   moritz braun
• [Gmsh] Exporting Matrices generated by getdp as MatrixMarket or similar   moritz braun
  • [Gmsh] Exporting Matrices generated by getdp as MatrixMarket or similar   Ruth V. Sabariego
    • [Gmsh] Exporting Matrices generated by getdp as MatrixMarket or similar   moritz braun
• [Gmsh] Erreur de syntaxe systématique   PLAUSSU Jean-Raoul CNRS
  • [Gmsh] Erreur de syntaxe systématique   Bastien Gorissen
• [Gmsh] Segmentation fault meshing over 100 million element   Andre Nicolle
• [Gmsh] How to only print lower triangle of symmetric matrix with print[A] in getdp   moritz braun
  • [Gmsh] How to only print lower triangle of symmetric matrix with print[A] in getdp   moritz braun
• [Gmsh] Triangulation remeshing using cubic map   Grandperrin Gwenol
• [Gmsh] Problem making a bulged cylinder using Gmsh   Rahul
  • [Gmsh] Problem making a bulged cylinder using Gmsh   rahulsn at iitk.ac.in
    • [Gmsh] Problem making a bulged cylinder using Gmsh   Geordie McBain
      • [Gmsh] Problem making a bulged cylinder using Gmsh   Rahul
      • [Gmsh] Problem making a bulged cylinder using Gmsh   Geordie McBain
      • [Gmsh] Problem making a bulged cylinder using Gmsh   rahulsn at iitk.ac.in
• [Gmsh] Are curved and high order gmsh meshes really high order ?   Pierre.Saramito at imag.fr
  • [Gmsh] Are curved and high order gmsh meshes really high order ?   Christophe Geuzaine
• [Gmsh] Periodic Surface   Christophe Geuzaine
• [Gmsh] Desirable Feature for getdp: higher order, at least quadratic shape functions also in 3D   moritz braun
  • [Gmsh] Desirable Feature for getdp: higher order, at least quadratic shape functions also in 3D   Christophe Geuzaine
• [Gmsh] Looking for example of using (undocumented) function ReadSolution in getdp   moritz braun
• [Gmsh] Left Atrium Model   issoufou.ide-nouhou at polymtl.ca
• [Gmsh] How to compile Qt interface and Python interface   Karin&NiKo
  • [Gmsh] How to compile Qt interface and Python interface   Christophe Geuzaine
• [Gmsh] Error..   Carlos Ferreira
  • [Gmsh] Error..   Christophe Geuzaine
• [Gmsh] How to include specific nodes in tetrahedral mesh   moritz braun
• [Gmsh] What is new with Boundary Layers?   Trevor Strickler
• [Gmsh] refine by splitting command line options   Jakub Sistek
• [Gmsh] 3D Mesh Trouble   jume5347 at uni.sydney.edu.au
  • [Gmsh] 3D Mesh Trouble   Zenker, Dr. Matthias
    • [Gmsh] 3D Mesh Trouble   Zenker, Dr. Matthias
• [Gmsh] Convert Gmsh file to hdf5 format using c++   rahulsn at iitk.ac.in
• [Gmsh] inconsistencies in the plotting of an ELNO field   jean pierre aubry
• [Gmsh] nodes inconsistency between 2D and 3D meshing   valentina carapella
  • [Gmsh] nodes inconsistency between 2D and 3D meshing   David Colignon
• [Gmsh] converting triangles to quadrangles mesh   Cristóbal Bertoglio B.
  • [Gmsh] converting triangles to quadrangles mesh   Jean-François Remacle
    • [Gmsh] converting triangles to quadrangles mesh   David Colignon
      • [Gmsh] converting triangles to quadrangles mesh   Cristóbal Bertoglio B.
      • [Gmsh] Fwd: converting triangles to quadrangles mesh   Cristóbal Bertoglio B.
• [Gmsh] gmsh/bamg   trophime
• [Gmsh] How to not output lines in .msh file   Orhan Shibliyev
• [Gmsh] gmsh/bamg - use of bgm posfiles???   trophime
  • [Gmsh] gmsh/bamg - use of bgm posfiles???   Christophe Geuzaine
    • [Gmsh] gmsh/bamg - use of bgm posfiles???   trophime
      • [Gmsh] gmsh/bamg - use of bgm posfiles???   trophime
      • [Gmsh] gmsh/bamg - use of bgm posfiles???   trophime
      • [Gmsh] gmsh/bamg - use of bgm posfiles???   trophime
• [Gmsh] element numbering in the conversion .msh to .inp   Donganta
• [Gmsh] Boundary Layers Question   Trevor Strickler
• [Gmsh] Mesh refinement   rona katzengold
• [Gmsh] connecting structured to unstructured meshed volumes in 3D   Philip Simons
  • [Gmsh] connecting structured to unstructured meshed volumes in 3D   Trevor Strickler
• [Gmsh] Grouping vertically-alighed nodes in Extrude command   Satoshi Kimura
  • [Gmsh] Grouping vertically-alighed nodes in Extrude command   Daniel Wheeler
• [Gmsh] pyNastran - nastran input/ouput file reader/writer   Steven Doyle
  • [Gmsh] pyNastran - nastran input/ouput file reader/writer   Umut Tabak
  • [Gmsh] Boolean operations on primitives   Martin Vymazal
  • [Gmsh] pyNastran - nastran input/ouput file reader/writer   Steven Doyle
• [Gmsh] Gmesh   gabriela at cbpf.br
• [Gmsh] simple hexahedron with periodic, aka. conforming, boundary mesh ?   Oswald Benedikt
  • [Gmsh] simple hexahedron with periodic, aka. conforming, boundary mesh ?   guillaume.demesy at fresnel.fr
    • [Gmsh] simple hexahedron with periodic, aka. conforming, boundary mesh ?   Oswald Benedikt
• [Gmsh] End of file in string   Orhan Shibliyev
• [Gmsh] Dynamic Remeshing   rahulsn at iitk.ac.in
  • [Gmsh] Dynamic Remeshing   rahulsn at iitk.ac.in
• [Gmsh] Gmsh internationalization..   Sula Victor
• [Gmsh] Strange Extrude Behavior   Melzig, Thomas
• [Gmsh] wiki, security probelm?   Shinjiro Miyawaki
  • [Gmsh] wiki, security probelm?   lukshuntim at gmail.com
• [Gmsh] Multiple materials in GMSH   Bojan Niceno
  • [Gmsh] Multiple materials in GMSH   Geordie McBain
• [Gmsh] Creating a cylinder with a hole   Orhan Shibliyev
  • [Gmsh] Creating a cylinder with a hole   Ruth V. Sabariego
• [Gmsh] Line loop with combined lines   Orhan Shibliyev
• [Gmsh] .geo script: How to creat a matrix of coordinates?   Olavo Luppi Silva
  • [Gmsh] .geo script: How to creat a matrix of coordinates?   Ruth V. Sabariego
• [Gmsh] Bug Report on the nightly version (2012.02.10)   김종운
• [Gmsh] meshing of a rotated volume   Melzig, Thomas
• [Gmsh] Skipping rendering step   Orhan Shibliyev
  • [Gmsh] Skipping rendering step   Frédéric Dubois
• [Gmsh] Question on gmsh   Steve Daley
  • [Gmsh] Question on gmsh   Geordie McBain
• [Gmsh] Characteristic length - svn vs gmsh 2.5.0   Romain Quey
  • [Gmsh] Characteristic length - svn vs gmsh 2.5.0   jean pierre aubry
    • [Gmsh] Characteristic length - svn vs gmsh 2.5.0   Zenker, Dr. Matthias
      • [Gmsh] Characteristic length - svn vs gmsh 2.5.0   Christophe Geuzaine
• [Gmsh] Connecting unstructured TET volumes to structured HEX volumes   Philip Simons
• [Gmsh] Mac installation nightmare   Yun Tao
  • [Gmsh] Mac installation nightmare   Christophe Geuzaine
• [Gmsh] anisostropic meshing / bamg algorithm   Zenker, Dr. Matthias
  • [Gmsh] anisostropic meshing / bamg algorithm   Zenker, Dr. Matthias
    • [Gmsh] anisostropic meshing / bamg algorithm   Martin Vymazal
      • [Gmsh] anisostropic meshing / bamg algorithm   Zenker, Dr. Matthias
      • [Gmsh] anisostropic meshing / bamg algorithm   Martin Vymazal
      • [Gmsh] anisostropic meshing / bamg algorithm   Zenker, Dr. Matthias
      • [Gmsh] anisostropic meshing / bamg algorithm   Zenker, Dr. Matthias
      • [Gmsh] anisostropic meshing / bamg algorithm   Zenker, Dr. Matthias
• [Gmsh] Dilate with different scales in each direction   Julien-J BERLAND
  • [Gmsh] Dilate with different scales in each direction   Mikhail Artemiev
• [Gmsh] 3D meshing from stp file   Cécile CD. DAVERSIN
• [Gmsh] MathEval plugin   Christophe Henrard
  • [Gmsh] MathEval plugin   mianzhi
  • [Gmsh] MathEval plugin   Christophe Henrard
• [Gmsh] typical steps after importing .stp file   Sangpil Yoon
• [Gmsh] handling stp file (example attached)   Sangpil Yoon
  • [Gmsh] handling stp file (example attached)   Christophe Geuzaine
    • [Gmsh] handling stp file (example attached)   Sangpil Yoon
      • [Gmsh] handling stp file (example attached)   Christophe Geuzaine
      • [Gmsh] handling stp file (example attached)   Sangpil Yoon
      • [Gmsh] handling stp file (example attached)   Christophe Geuzaine
• [Gmsh] Gmsh build on RHEL4 is mssing GUI!   Jamshid Gharib
  • [Gmsh] Gmsh build on RHEL4 is mssing GUI!   Christophe Geuzaine
    • [Gmsh] Gmsh build on RHEL4 is mssing GUI!   Jamshid Gharib
      • [Gmsh] Gmsh build on RHEL4 is mssing GUI!   David Colignon
• [Gmsh] Need help with 3d model   Piotr Buda
• [Gmsh] problems running gmsh installed from source   Benedikt Oswald
• [Gmsh] converting a quadrilateral mesh to triangular   mario moro
• [Gmsh] Windows gmsh build with STEP   bms at cecs.pdx.edu
• [Gmsh] Question about the input *.geo file size   류은현
• [Gmsh] 回复： gmsh Digest, Vol 109, Issue 26   liang dong
• [Gmsh] Problems with Gmsh in openSUSE 12.1   Matthias
  • [Gmsh] Problems with Gmsh in openSUSE 12.1   jean pierre aubry
    • [Gmsh] Gmsh and boundary conditions   Alessandro Vicini
    • [Gmsh] Step files and mesh size   Alessandro Vicini
      • [Gmsh] Step files and mesh size   Geordie McBain
• [Gmsh] error on display of MED file   jean pierre aubry
• [Gmsh] debugr.pos & debugs.pos files   Mahesh Bailakanavar
• [Gmsh] question regarding debug files   Mahesh Bailakanavar
• [Gmsh] using a msh file to define surfaces   Wayne Christopher
  • [Gmsh] using a msh file to define surfaces   Ruth V. Sabariego
• [Gmsh] Cut-Plane Mesh outlines   Holger Schwaab
• [Gmsh] "Cut and merge faces"   Matteo Icardi
  • [Gmsh] Problems with geo file   Alessandro Vicini
    • [Gmsh] Problems with geo file   Ruth V. Sabariego
      • [Gmsh] R: Problems with geo file   Alessandro Vicini
• [Gmsh] what is wrong with this file?   Umut Tabak
• [Gmsh] To Optimize the 3D mesh   yoshihisa aoyagi
• [Gmsh] (no subject)   yoshihisa aoyagi
  • [Gmsh] (no subject)   ouafa bouloumou
  • [Gmsh] (no subject)   Vladimir Pavlov
  • [Gmsh] (no subject)   Giuseppe Addessi
  • [Gmsh] (no subject)   Shi Jin
  • [Gmsh] (no subject)   Cristóbal Bertoglio B.
  • [Gmsh] (no subject)   mohamed mbehou
  • [Gmsh] (no subject)   mohamed mbehou
  • [Gmsh] (no subject)   Michel Dupront
  • [Gmsh] (no subject)   Mikhail Artemiev
  • [Gmsh] (no subject)   Nico Schlömer
    • [Gmsh] (no subject)   Ruth V. Sabariego
• [Gmsh] How to write the program on the Optimize 3D Tetra Mesh.   1948 super
• [Gmsh] Prescribe surface mesh with Delaunay for 3D?   Shinjiro Miyawaki
• [Gmsh] Surfaces of tetrahedrons   Abushaikha, Ahmed
• [Gmsh] 0 element number   Wayne Christopher
• [Gmsh] compiling the source code   Mesh Learner
  • [Gmsh] compiling the source code   Christophe Geuzaine
• [Gmsh] Re 0 element number   jean pierre aubry
  • [Gmsh] Re 0 element number   Wayne Christopher
    • [Gmsh] Re 0 element number   Christophe Geuzaine
  • [Gmsh] Re 0 element number   jean pierre aubry
    • [Gmsh] Re 0 element number   Wayne Christopher
• [Gmsh] api_demos - Camera class???   trophime
  • [Gmsh] api_demos - mostly fixed   trophime
    • [Gmsh] api_demos - mostly fixed   Christophe Geuzaine
• [Gmsh] Open GUI via terminal   Orxan Shibliyev
  • [Gmsh] Open GUI via terminal   Martin Vymazal
• [Gmsh] Surface Patches on Extruded Surfaces (e.g.: Cylinder)   James Snyder
  • [Gmsh] Surface Patches on Extruded Surfaces (e.g.: Cylinder)   David Colignon
• [Gmsh] Physical names and step files   Wayne Christopher
  • [Gmsh] Physical names and step files   Christophe Geuzaine
• [Gmsh] Version GMSh   Estagerie Laetitia
  • [Gmsh] Version GMSh   David Colignon
  • [Gmsh] Version GMSh   Laurent Van Miegroet
  • [Gmsh] Version GMSh   Jean-François Remacle
• [Gmsh] post mesh boundary layer   Rajeev Jain
• [Gmsh] setting text editor   michele cavalerin
  • [Gmsh] setting text editor   Geordie McBain
• [Gmsh] rtree.h license   Anton Gladky
• [Gmsh] Incompatibility for OpenCASCADE 6.5.2 AND Polar Coordinate plotting in Post-Processing Module   Lennie Song
  • [Gmsh] Incompatibility for OpenCASCADE 6.5.2 AND Polar Coordinate plotting in Post-Processing Module   Christophe Geuzaine
• [Gmsh] No terminal output on windows 7   戴炜锋 at NETEASE
  • [Gmsh] No terminal output on windows 7   Serban.Georgescu at uk.fujitsu.com
• [Gmsh] Remeshing a distorted mesh with gmsh   Colin McAuliffe
  • [Gmsh] Remeshing a distorted mesh with gmsh   David Colignon
    • [Gmsh] Remeshing a distorted mesh with gmsh   Colin McAuliffe
• [Gmsh] Issue with composite volumes   Joshua Teichman
  • [Gmsh] Issue with composite volumes   David Colignon
• [Gmsh] trouble building latest svn gmsh with cgns 3.1.3.4-1   trophime
  • [Gmsh] trouble building latest svn gmsh with cgns 3.1.3.4-1   trophime
• [Gmsh] Help   Issoufou Nouhou
  • [Gmsh] Help   Lazarus Ndatuwong
  • [Gmsh] HELP   Sivamayam Sivasuthan
• [Gmsh] rpath with local settings   William F Mitchell
• [Gmsh] gmsh and fedora F16   Christophe Langrenne
• [Gmsh] It is possible to refine mesh in point using gmsh?   abdelaziz khomsi
  • [Gmsh] It is possible to refine mesh in point using gmsh?   Geordie McBain
    • [Gmsh] Fwd: It is possible to refine mesh in point using gmsh?   Geordie McBain
      • [Gmsh] It is possible to refine mesh in point using gmsh?   abdelaziz khomsi
      • [Gmsh] It is possible to refine mesh in point using gmsh?   Geordie McBain
      • [Gmsh] Fwd: It is possible to refine mesh in point using gmsh?   Geordie McBain
• [Gmsh] a problme about extrude   Gao, Xu (S&T-Student)
• [Gmsh] 10 nodes tetrahedron elements   Nathan BENKEMOUN
• [Gmsh] Max in a character expression   Martin Genet
• [Gmsh] FW: It is possible to refine mesh in point using gmsh?   abdelaziz khomsi
  • [Gmsh] FW: It is possible to refine mesh in point using gmsh?   jean pierre aubry
• [Gmsh] Not getting a volume mesh   Wayne Christopher
  • [Gmsh] Not getting a volume mesh   Ruth V. Sabariego
    • [Gmsh] Not getting a volume mesh   Wayne Christopher
      • [Gmsh] Not getting a volume mesh   Ruth V. Sabariego
      • [Gmsh] Not getting a volume mesh   Wayne Christopher
• [Gmsh] Definition of integer number   Felix Salazar
• [Gmsh] 10 nodes tetrahedron gmsh--->vtk   Nathan BENKEMOUN
• [Gmsh] svn make clash on enabling MED and MPI   Geordie McBain
• [Gmsh] How to compile a simple API program   PINO Daniel
  • [Gmsh] How to compile a simple API program   trophime
• [Gmsh] Uninstall Gmsh   Tony Murtagh
• [Gmsh] strange behaviour when using mmg3d   trophime
  • [Gmsh] strange behaviour when using mmg3d   Jean-François Remacle
    • [Gmsh] strange behaviour when using mmg3d   Christophe Geuzaine
• [Gmsh] quasi-static   Fábio Ruiz Daró
• [Gmsh] segmentation fault when parametrize compound surface   Matteo Icardi
• [Gmsh] transfinite surface   Nathan BENKEMOUN
• [Gmsh] a circle with a bspline?   Shinjiro Miyawaki
• [Gmsh] Convert Hex Mesh to Tetra Mesh   Ted Kord
  • [Gmsh] Convert Hex Mesh to Tetra Mesh   Geordie McBain
• [Gmsh] wanna to develop gmsh   Daniel WEI
• [Gmsh] volume mesh   Martin Genet
  • [Gmsh] volume mesh   David Colignon
    • [Gmsh] volume mesh   Martin Genet
• [Gmsh] Outer edge / face boundary layer nodes on extrusions   Mark Starnes
• [Gmsh] mesh file size   M Klemm
  • [Gmsh] mesh file size   Andre Nicolle
• [Gmsh] Probléme Extrude Point In Surface Maillage 2D   gerard.fleury at inrs.fr
  • [Gmsh] Probléme Extrude Point In Surface Maillage 2D   Geordie McBain
    • [Gmsh] Probléme Extrude Point In Surface Maillage 2D   gerard.fleury at inrs.fr
• [Gmsh] Gmsh information   vanessa.covello at unical.it
  • [Gmsh] Gmsh information   Bastien Gorissen
• [Gmsh] Minimum points for straight line   Matthias Sedlmaier
• [Gmsh] Problème de cohérence de points   alaa.mourad at inrs.fr
  • [Gmsh] Problème de cohérence de points   Ruth V. Sabariego
    • [Gmsh] Mesh size control with frontal algo   Martin Vymazal
      • [Gmsh] Mesh size control with frontal algo   Jean-François Remacle
      • [Gmsh] Mesh size control with frontal algo   Martin Vymazal
• [Gmsh] sphere hack   William F Mitchell
• [Gmsh] Re Minimum points for straight line   jean pierre aubry
  • [Gmsh] Re Minimum points for straight line   Matthias Sedlmaier
• [Gmsh] If - ElseIf - EndIf   yuanwucai
  • [Gmsh] If - ElseIf - EndIf   Ruth V. Sabariego
    • [Gmsh] If - ElseIf - EndIf   yuanwucai
• [Gmsh] Error message is generated when Step , IGES and OCC file is read in GMH excution   1948 super
• [Gmsh] Regarding Adaptation of GMSH grid   Ashish Garg
• [Gmsh] Cmake didn't find the blas library!   Langrenne
• [Gmsh] Problème de compilation gmsh   Christophe Langrenne
• [Gmsh] reProblème de compilation gmsh   jean pierre aubry
• [Gmsh] Element sizes and recombination algorithms   Colin McAuliffe
  • [Gmsh] Element sizes and recombination algorithms   Cristóbal Bertoglio B.
• [Gmsh] The 'Layers' parameter cannot be conserved after the duplicata operation   戴炜锋
• [Gmsh] Re Element sizes and recombination algorithms   jean pierre aubry
  • [Gmsh] Re Element sizes and recombination algorithms   jean pierre aubry
    • [Gmsh] Re Element sizes and recombination algorithms   Cristóbal Bertoglio B.
• [Gmsh] How to view illegal tets in mesh   Mark Starnes
• [Gmsh] gmsh   jens_jungmann at t-online.de
  • [Gmsh] gmsh   Christophe Geuzaine
• [Gmsh] One question for Gmsh   Kuan Zhang
  • [Gmsh] One question for Gmsh   Eiser, Sebastian
• [Gmsh] run time error   NUGUES Pierre
  • [Gmsh] run time error   Mikhail Artemiev
• [Gmsh] Configuration problem with Intel MKL   Mikhail Artemiev
  • [Gmsh] Configuration problem with Intel MKL   Mikhail Artemiev
  • [Gmsh] Configuration problem with Intel MKL   Mikhail Artemiev
• [Gmsh] How to import X, Y coordinates from .dat file into gmesh for meshing purpose   Ashish Garg
  • [Gmsh] How to import X, Y coordinates from .dat file into gmesh for meshing purpose   Geordie McBain
• [Gmsh] tetrahedron 29 nodes ordering   Michel Dupront
  • [Gmsh] tetrahedron 29 nodes ordering   Rui Maciel
    • [Gmsh] tetrahedron 29 nodes ordering   Rui Maciel
• [Gmsh] Groups do not show on opening of a med file   jean pierre aubry
• [Gmsh] Is there a way to apply Progression or Bump when using Extrude command?   Feifei TONG
  • [Gmsh] Is there a way to apply Progression or Bump when using Extrude command?   Praveen C
    • [Gmsh] Is there a way to apply Progression or Bump when using Extrude command?   Feifei TONG
• [Gmsh] third order tetrahedron mesh   Michel Dupront
  • [Gmsh] third order tetrahedron mesh   micdup
• [Gmsh] Compile Error (Vc++ 2008) Gmsh 2.5 stable source with OCC(6.5.2)   1948 super
  • [Gmsh] Compile Error (Vc++ 2008) Gmsh 2.5 stable source with OCC(6.5.2)   Christophe Geuzaine
  • [Gmsh] Compile Error (Vc++ 2008) Gmsh 2.5 stable source with OCC(6.5.2)   1948 super
  • [Gmsh] Compile Error (Vc++ 2008) Gmsh 2.5 stable source with OCC(6.5.2)   1948 super
• [Gmsh] mesh element sizes   Peter Metaxas
  • [Gmsh] mesh element sizes   Peter Metaxas
• [Gmsh] Tetrahedrons of order greater than 2   Michel Dupront
• [Gmsh] How can I generate a 6-node triangle with Gmsh?   mohamed mbehou
• [Gmsh] pyNastran version 0.4.0 has been released!   Steven Doyle
• [Gmsh] Problem with boundary layer.   Jie Chen
• [Gmsh] Getting a .geo variable into a Field[1].F equation   Mark Starnes
  • [Gmsh] Getting a .geo variable into a Field[1].F equation   Praveen C
    • [Gmsh] Getting a .geo variable into a Field[1].F equation   Mark Starnes
• [Gmsh] question   karim Rashidi
  • [Gmsh] Question   Boularas Abderrahmane
• [Gmsh] How to change mesh-size   Tomohisa Simoyama
  • [Gmsh] How to change mesh-size   Tomohisa Simoyama
• [Gmsh] Import step assemblies into gmsh   Lars Rindorf
  • [Gmsh] Import step assemblies into gmsh   Negi, Ashish
• [Gmsh] 3D volume as tetrahedra only   Bartek Grychtol
  • [Gmsh] 3D volume as tetrahedra only   Mark Starnes
    • [Gmsh] 3D electrostatic BEM solver   Mark Smith
      • [Gmsh] 3D electrostatic BEM solver   César A. Vecchio Toloy
    • [Gmsh] 3D volume as tetrahedra only   Bartek Grychtol
• [Gmsh] Gmsh: Post-Processing   Hemaraju Pollayi
• [Gmsh] outward normal of surface triangles   Negi, Ashish
  • [Gmsh] outward normal of surface triangles   Ashish Garg
    • [Gmsh] outward normal of surface triangles   Negi, Ashish
      • [Gmsh] outward normal of surface triangles   Mark Starnes
      • [Gmsh] outward normal of surface triangles   Ashish Garg
      • [Gmsh] outward normal of surface triangles   Negi, Ashish
      • [Gmsh] outward normal of surface triangles   Negi, Ashish
• [Gmsh] graphical window's title vanishing   jean pierre aubry
• [Gmsh] GMSH.exe(2.50) RUN time Error after Building with OpenCascade6.5.2 using VisualC++(2008 Visual Express)   1948 super
• [Gmsh] Define a patch on surface with higher mesh density   Bartek Grychtol
• [Gmsh] Contour Plots   Hemaraju Pollayi
• [Gmsh] Information   vanessa.covello at unical.it
  • [Gmsh] Information   Bastien Gorissen
• [Gmsh] Next stable release?   Matthias Sedlmaier
• [Gmsh] Print to GIF   Christophe Henrard
• [Gmsh] Using gmsh as library by C++, received warning message "Staring subloop x in Line Loop 1 (are you sure about this?)   Guowei He
  • [Gmsh] Using gmsh as library by C++, received warning message "Staring subloop x in Line Loop 1 (are you sure about this?)   Guowei He
    • [Gmsh] Using gmsh as library by C++, received warning message "Staring subloop x in Line Loop 1 (are you sure about this?)   Guowei He
• [Gmsh] addCylinder method using OpenCASCADE factory   Guowei He
• [Gmsh] degenerate quads / add points on edges when remeshing   Cristóbal Bertoglio B.
• [Gmsh] ask about gmsh   Theo Ariandi
• [Gmsh] different return types with addRuledFaces function in GModel.cpp and GModelFactory.cpp   Guowei He
  • [Gmsh] different return types with addRuledFaces function in GModel.cpp and GModelFactory.cpp   Benjamin Ruard
• [Gmsh] 3D mesh between/inside extruded cubes   Szalontai Levente
  • [Gmsh] 3D mesh between/inside extruded cubes   Levente07
  • [Gmsh] 3D mesh between/inside extruded cubes   Geordie McBain
• [Gmsh] curved elements import/export support   Emna Hassani
• [Gmsh] Is there any example for createGModel method in GModel.h, using as library?   Guowei He
• [Gmsh] gmsh tollerance   kRambler
  • [Gmsh] gmsh tollerance   karamazv gmail
  • [Gmsh] gmsh tollerance   kRambler
  • [Gmsh] gmsh tollerance   karamazv gmail
  • [Gmsh] gmsh tollerance   Mikhail Artemiev
• [Gmsh] Combine different meshes in same geometry   Marco Cargnelutti
  • [Gmsh] Combine different meshes in same geometry   Marco Cargnelutti
• [Gmsh] 2D meshing without changing the outline   Bartek Grychtol
• [Gmsh] Could not read MED families   Luca Dall'Olio
  • [Gmsh] Could not read MED families   Christophe Geuzaine
    • [Gmsh] Could not read MED families   Luca Dall'Olio
• [Gmsh] Extrude command through Gmsh   rahulsn at iitk.ac.in
• [Gmsh] Gmsh cannot read .med file produced by Salome   jean pierre aubry
  • [Gmsh] Gmsh cannot read .med file produced by Salome   Christophe Geuzaine
    • [Gmsh] Gmsh cannot read .med file produced by Salome   jean pierre aubry
      • [Gmsh] Gmsh cannot read .med file produced by Salome   Christophe Geuzaine
      • [Gmsh] Gmsh cannot read .med file produced by Salome   jean pierre aubry
• [Gmsh] Get surfaces after extrude   Giorgos Bontzios
• [Gmsh] FSI Meshes with variable boundary layer   Paolo Tricerri
• [Gmsh] Adapting Bathymetry data to Gmsh   Tomohisa Simoyama
• [Gmsh] Mesh.SaveAll with physical entities   Jose Miguel Perez Perez
• [Gmsh] Re Mesh.SaveAll with physical entities   jean pierre aubry
• [Gmsh] [Getdp] Visualize the already computed time-steps while overall computation is still going on   meyer at itwm.fraunhofer.de
• [Gmsh] Problems with the post-procesing   isanchez at us.es
• [Gmsh] given number of nodes   GAGLIARDINI Olivier
  • [Gmsh] given number of nodes   GAGLIARDINI Olivier
• [Gmsh] element normal after recombine?   Martin Genet
• [Gmsh] Cannot build 3D FEM mesh for the sphere   Alexander Kalinin
  • [Gmsh] Cannot build 3D FEM mesh for the sphere   Mikhail Artemiev
    • [Gmsh] Cannot build 3D FEM mesh for the sphere   Alexander Kalinin
• [Gmsh] About the mesh   王涛
• [Gmsh] Script GMSH post-processing plugins or options from GETDP   meyer at itwm.fraunhofer.de
• [Gmsh] question sur GMSH   Yanneck WIELHORSKI
• [Gmsh] 3D mesh from SAT file   Junho LEE
• [Gmsh] Gmsh 2.5 symmetry   Alessandro Pani
• [Gmsh] Obtaining same number of nodes on two lines   denis cohen
• [Gmsh] Re Obtaining same number of nodes on two lines   jean pierre aubry
• [Gmsh] Re Gmsh 2.5 symmetry   jean pierre aubry
• [Gmsh] Delaunay with acute angles   Jose Miguel Perez Perez
• [Gmsh] Cubic Mesh   Paolo Tricerri
  • [Gmsh] Cubic Mesh   Ruth V. Sabariego
• [Gmsh] Refine by splitting over a curve   Felix Salazar
• [Gmsh] [PATCH] Fix build failure with OCC 6.5.3   D. Barbier
  • [Gmsh] [PATCH] Fix build failure with OCC 6.5.3   Christophe Geuzaine
• [Gmsh] [PATCH] gcc-4.7 compilation   Anton Gladky
• [Gmsh] Implementing loop direction in C++   Tolga Kurt
  • [Gmsh] Implementing loop direction in C++   Mikhail Artemiev
• [Gmsh] export to step and brep fails - "No OpenCASCADE model found" - ubuntu 12.04   newsboost
  • [Gmsh] export to step and brep fails - "No OpenCASCADE model found" - ubuntu 12.04   Rasmus Lundsgaard
• [Gmsh] Transfinite mesh of a ruled surface   Felix Salazar
• [Gmsh] ERROR: Edge ### - ### multiple times in surface mesh   Sangpil Yoon
• [Gmsh] Spline Equation   Hemaraju Pollayi
• [Gmsh] Circular Symmetry on Faces   Wendy
• [Gmsh] gmesh to Elmer   Jack Mandelman
  • [Gmsh] gmesh to Elmer   GAGLIARDINI Olivier
  • [Gmsh] gmesh to Elmer   Jack Mandelman
• [Gmsh] Running mainsimple.cpp   rahulsn at iitk.ac.in
• [Gmsh] multiple lines for a group in a geo file   Sangpil Yoon
• [Gmsh] Re multiple lines for a group in a geo file   jean pierre aubry
• [Gmsh] trouble with latest svn   trophime
  • [Gmsh] trouble with latest svn   Christophe Geuzaine
• [Gmsh] plot3d problem   H.deVries-1 at utwente.nl
• [Gmsh] Modify Meshing Parameters   Nuria Maldonado
• [Gmsh] intersecting lines and splines   Cian Wilson
• [Gmsh] Retrieving point coordinates from STEP file   Matthias Sedlmaier
  • [Gmsh] Retrieving point coordinates from STEP file   Matthias Sedlmaier
• [Gmsh] gmsh or gmshToFoam problem?   Madeleine Vincent
  • [Gmsh] gmsh or gmshToFoam problem?   Mark Starnes
  • [Gmsh] gmsh or gmshToFoam problem?   Mattijs Janssens
  • [Gmsh] gmsh or gmshToFoam problem?   Jean-François Remacle
• [Gmsh] Erreur sur le maillage 3D dans GMSH   De La Chevasnerie, Arnaud
  • [Gmsh] Erreur sur le maillage 3D dans GMSH   Jean-François Remacle
    • [Gmsh] Partitioned mesh format   Martin Vymazal
• [Gmsh] Gmsh2.6 : troubles with Linux64   Karin&NiKo
• [Gmsh] Mesh Generation with Different Element Sizes   Andreas Pritschet
  • [Gmsh] Mesh Generation with Different Element Sizes   Zenker, Dr. Matthias
• [Gmsh] Export to Iges, Step, Brep   Mira Lennis
• [Gmsh] Problem creating mesh   Jackson Penelope A
  • [Gmsh] Problem creating mesh   Cian Wilson
• [Gmsh] New ability to connect extruded meshes to tetrahedral grids using pyramids   Guillaume Parent
  • [Gmsh] New ability to connect extruded meshes to tetrahedral grids using pyramids   Trevor Strickler
• [Gmsh] STLRemeshing   victor bonhomme
  • [Gmsh] STLRemeshing   victor bonhomme
• [Gmsh] Physical Groups in MSH   Niels
• [Gmsh] RE Physical Groups in MSH   jean pierre aubry
• [Gmsh] Meaning of Ghost Cell   Orhan Shibliyev
  • [Gmsh] Meaning of Ghost Cell   Daniel Wheeler
  • [Gmsh] Problems with gmsh - extrusion and cgns file format   Martin Vymazal
• [Gmsh] Finding the intersection curve of two surfaces in GMSH   Hongjun Ran
• [Gmsh] Export to GIF creates a PNG file with GMSH 2.5.0 on Red Hat 5.3   Christophe Henrard
• [Gmsh] How to duplicate things "programmatically"?   Joseph Frippiat
  • [Gmsh] How to duplicate things "programmatically"?   Ruth V. Sabariego
    • [Gmsh] How to duplicate things "programmatically"?   Joseph Frippiat
    • [Gmsh] How to duplicate things "programmatically"?   Ruth V. Sabariego
• [Gmsh] RE How to duplicate things "programmatically"   jean pierre aubry
• [Gmsh] Elliptic ring wing extrusion   Mira Lennis
• [Gmsh] memory bug   Onur Solmaz
• [Gmsh] 3D geometry check   Joseph Frippiat
  • [Gmsh] 3D geometry check   Ruth V. Sabariego
• [Gmsh] Combine 2 Objects in Mesh   William Seigfreid
  • [Gmsh] Combine 2 Objects in Mesh   Zenker, Dr. Matthias
• [Gmsh] importing airfoil geometry   Palaniappan, Vignesh
• [Gmsh] Partition numbering   Orhan Shibliyev
• [Gmsh] GMSH 2.6.0 Bug Report   Gerhard Huber
  • [Gmsh] GMSH 2.6.0 Bug Report   Gerhard Huber
    • [Gmsh] GMSH 2.6.0 Bug Report   Christophe Geuzaine
• [Gmsh] ignore error messages option   Mira Lennis
• [Gmsh] Error messages loading aborted & manipulating CharacteristicLength   Mira Lennis
• [Gmsh] Min Elementsize does not work   Niels
• [Gmsh] Min Elementsize does not work 2   Niels
• [Gmsh] Tetrahedron order 5   Michel Dupront
• [Gmsh] Batch plotting: On selecting the "TimeStep" in a med result file.   Eiser, Sebastian
  • [Gmsh] Batch plotting: On selecting the "TimeStep" in a med result file.   Christophe Geuzaine
• [Gmsh] problem with Matheval field   Giorgos Kourakos
  • [Gmsh] problem with Matheval field   Christophe Geuzaine
• [Gmsh] high order node distribution   jakob schwarz
  • [Gmsh] high order node distribution   Jean-François Remacle
• [Gmsh] Données de maillage   François GIBELLI
• [Gmsh] Installing Gmsh 2.6 to openSuSE Linux 12.1   S. Prows
  • [Gmsh] Installing Gmsh 2.6 to openSuSE Linux 12.1   lukshuntim at gmail.com
  • [Gmsh] Installing Gmsh 2.6 to openSuSE Linux 12.1   jean pierre aubry
• [Gmsh] Internal boundary with 3D mesh   Gianluca Longoni
• [Gmsh] Cells disappear   Wei-Lun Hsu
• [Gmsh] wall normal extrusion   THULKAR, Suraj
• [Gmsh] from hexahedrons to tetrahedrons   Tom
• [Gmsh] Face <-> Elements Connectivity Info   Kostas Politis
• [Gmsh] Visibility windows   trophime
  • [Gmsh] Visibility windows   Christophe Geuzaine
• [Gmsh] Triangles when using 'Transfinite Line' and Blossom algorithm   Eiser, Sebastian
  • [Gmsh] Triangles when using 'Transfinite Line' and Blossom algorithm   Christophe Geuzaine
• [Gmsh] Structured Mesh combined with Unstructured mesh   Feifei TONG
  • [Gmsh] Structured Mesh combined with Unstructured mesh   Christophe Geuzaine
• [Gmsh] Crash during partitioning   Orhan Shibliyev
• [Gmsh] Meshing is slow because Netgen is too verbose   Serban Georgescu
  • [Gmsh] Meshing is slow because Netgen is too verbose   Christophe Geuzaine
    • [Gmsh] Meshing is slow because Netgen is too verbose   Serban Georgescu
    • [Gmsh] Meshing is slow because Netgen is too verbose   Christophe Geuzaine
      • [Gmsh] Meshing is slow because Netgen is too verbose   Serban Georgescu
      • [Gmsh] hi，ask a question about the gmsh.   Guoqiang Xue
• [Gmsh] unstructured hexahedral meshes   Cristóbal Bertoglio B.
  • [Gmsh] unstructured hexahedral meshes   Jean-François Remacle
    • [Gmsh] unstructured hexahedral meshes   Cristóbal Bertoglio B.
• [Gmsh] Getting GMsh to ignroe shoreline points   Jiplea, Marius
  • [Gmsh] Getting GMsh to ignroe shoreline points   Geordie McBain
    • [Gmsh] Getting GMsh to ignroe shoreline points   Jiplea, Marius
      • [Gmsh] Getting GMsh to ignroe shoreline points   Geordie McBain
      • [Gmsh] Getting GMsh to ignroe shoreline points   Jiplea, Marius
      • [Gmsh] Getting GMsh to ignroe shoreline points   Geordie McBain
      • [Gmsh] Getting GMsh to ignroe shoreline points   Jiplea, Marius
• [Gmsh] Gmsh isn't runnig   Женечка Токарева
  • [Gmsh] Gmsh isn't runnig   Serban.Georgescu at uk.fujitsu.com
    • [Gmsh] Gmsh isn't runnig   Serban.Georgescu at uk.fujitsu.com
      • [Gmsh] Gmsh isn't runnig   Serban.Georgescu at uk.fujitsu.com
      • [Gmsh] Gmsh isn't runnig   Serban.Georgescu at uk.fujitsu.com
• [Gmsh] Can Gmsh be compiled as .EXE file?   Hemaraju Pollayi
  • [Gmsh] Can Gmsh be compiled as .EXE File ?   Hemaraju Pollayi
• [Gmsh] GetDP   Hemaraju Pollayi
• [Gmsh] GMSH to Elmer   Dragon Age
  • [Gmsh] GMSH to Elmer   Dragon Age
    • [Gmsh] GMSH to Elmer   Zenker, Dr. Matthias
• [Gmsh] File.POS to File.JPG   Møђαmα∂ ζhαкαrøυŋ ζhαкαrøυŋ
  • [Gmsh] File.POS to File.JPG   Christophe Geuzaine
• [Gmsh] Remesh STL with constraint on edge length / area   Domingo Chavez
  • [Gmsh] Remesh STL with constraint on edge length / area   Christophe Geuzaine
    • [Gmsh] Remesh STL with constraint on edge length / area   Domingo Chavez
• [Gmsh] Gmsh cannot find LAPACK although it is installed   Aleksey Rukhlenko
  • [Gmsh] Gmsh cannot find LAPACK although it is installed   Aleksey Rukhlenko
• [Gmsh] error when intending to edit .geo file   Ziyu ZHANG
  • [Gmsh] error when intending to edit .geo file   Ziyu ZHANG
  • [Gmsh] error when intending to edit .geo file   lukshuntim at gmail.com
    • [Gmsh] Fwd: error when intending to edit .geo file   Ziyu ZHANG
• [Gmsh] Getting a graded mesh metric   Jiplea, Marius
• [Gmsh] Command Line - Saving File as "inp"   René Wohlgethan
  • [Gmsh] Command Line - Saving File as "inp"   Christophe Geuzaine
    • [Gmsh] Command Line - Saving File as "inp"   René Wohlgethan
      • [Gmsh] Command Line - Saving File as "inp"   adrien gros
      • [Gmsh] how know what are neighbor mesh   adrien gros
• [Gmsh] wrong node id with high-order element mesh   家在仁和
• [Gmsh] Fwd: Re[9]: Gmsh isn't runnig   Женечка Токарева
• [Gmsh] Extract plugin   Andres Gonzalez Estrada
  • [Gmsh] Extract plugin   Christophe Geuzaine
• [Gmsh] Gmsh question about edges numbering   周建美
  • [Gmsh] Gmsh question about edges numbering   jm z
  • [Gmsh] Gmsh question about edges numbering   Christophe Geuzaine
• [Gmsh] Characteristic length   Andres Gonzalez Estrada
  • [Gmsh] Characteristic length   Christophe Geuzaine
    • [Gmsh] Characteristic length   Jö Fahlke
    • [Gmsh] Characteristic length   Christophe Geuzaine
      • [Gmsh] Characteristic length   Andres Gonzalez Estrada
      • [Gmsh] Characteristic length   Jö Fahlke
• [Gmsh] Files missing in GMsh 2.6.1   Gaurav
  • [Gmsh] Files missing in GMsh 2.6.1   Gaurav
    • [Gmsh] Files missing in GMsh 2.6.1   Christophe Geuzaine
• [Gmsh] Defining a cylinder inside a cube using extrude command   sharma.abhi.itbhu at gmail.com
  • [Gmsh] Defining a cylinder inside a cube using extrude command   Ruth V. Sabariego
• [Gmsh] periodic, aka. conforming boundary meshes ?   Benedikt Oswald
  • [Gmsh] periodic, aka. conforming boundary meshes ?   Zenker, Dr. Matthias
  • [Gmsh] periodic, aka. conforming boundary meshes ?   Mikhail Artemiev
    • [Gmsh] periodic, aka. conforming boundary meshes ?   Benedikt Oswald
• [Gmsh] Structured mesh of a STEP part   PINO Daniel
  • [Gmsh] Structured mesh of a STEP part   PINO Daniel
    • [Gmsh] Structured mesh of a STEP part   Zenker, Dr. Matthias
      • [Gmsh] Structured mesh of a STEP part   Zenker, Dr. Matthias
      • [Gmsh] Structured mesh of a STEP part   PINO Daniel
  • [Gmsh] Structured mesh of a STEP part   PINO Daniel
• [Gmsh] Extrusion and outward normals to the whole surface   Alexander Kalinin
• [Gmsh] Adapting Mesh Size to Bathymetry on the Sphere   Lee, Shaun
• [Gmsh] creating mesh with a point cloud   Dharmendar Reddy
• [Gmsh] sweeping through a mode shape view   jean pierre aubry
  • [Gmsh] sweeping through a mode shape view   Geordie McBain
    • [Gmsh] sweeping through a mode shape view   jean pierre aubry
      • [Gmsh] sweeping through a mode shape view   Geordie McBain
• [Gmsh] [Help] Meshformat   Alan Carcreff
• [Gmsh] read step and save as unrolled geo   Zong
• [Gmsh] Red Hat: No libz.so.1   Philipp Germann
• [Gmsh] node ordering for hexaedra order>=3   Marie-Claire Le Pape
• [Gmsh] output geo by command line   Zong
  • [Gmsh] output geo by command line   David Colignon
    • [Gmsh] output geo by command line   Zong
• [Gmsh] 2D triangle structure meshes   Michel Dupront
• [Gmsh] fichier de sortie de données   Saidou Mangoina
• [Gmsh] RE fichier de sortie de données   jean pierre aubry
• [Gmsh] Gmsh on Mac OS X / retina display   Pierre-Olivier Dallaire
  • [Gmsh] Gmsh on Mac OS X / retina display   Pierre-Olivier Dallaire
    • [Gmsh] Gmsh on Mac OS X / retina display   Pierre-Olivier Dallaire
• [Gmsh] Symmetry on Layered Surface at meshing time question   jean pierre aubry
• [Gmsh] holes intersect boundary   Nico Schlömer
  • [Gmsh] holes intersect boundary   Nico Schlömer
    • [Gmsh] holes intersect boundary   David Colignon
      • [Gmsh] holes intersect boundary   Nico Schlömer
      • [Gmsh] holes intersect boundary   Geordie McBain
      • [Gmsh] holes intersect boundary   Nico Schlömer
• [Gmsh] Remeshing   Karin&NiKo
  • [Gmsh] Remeshing   Karin&NiKo
  • [Gmsh] Remeshing   Karin&NiKo
    • [Gmsh] Refinement Inlet of a pipe   Emilie Sauvage
• [Gmsh] Extraction of isocontours arrays   Quéméner Gilles
• [Gmsh] Re Help   jean pierre aubry
• [Gmsh] Question concernant l'optimisation du paramètre de maille sous Gmsh   PLAUSSU Jean-Raoul CNRS
• [Gmsh] [gmsh] internal surface in a volume   Kyunghoon Lee
• [Gmsh] Accessing gmsh GUI from my own c++ code   Arijit Khan
• [Gmsh] Stretching transformations in gmsh   Max Rudolph
• [Gmsh] How to Quadrilateralize 2D mesh using qmorph(implemented in meshGFaceQuadrilateralize.h)   li wei
• [Gmsh] Re Stretching transformations in gmsh   jean pierre aubry
  • [Gmsh] Re Stretching transformations in gmsh   Max Rudolph
  • [Gmsh] Re Stretching transformations in gmsh   jean pierre aubry
• [Gmsh] Problem with Ellipse   Max Rudolph
• [Gmsh] gmsh-image-generation without GUI   Stefan.Kremer at Schoeck.de
• [Gmsh] Problem with image-generation without GUI is solved   Stefan.Kremer at Schoeck.de
  • [Gmsh] Problem with image-generation without GUI is solved   Eiser, Sebastian
• [Gmsh] Almost structured mesh - Why aren't they structured?   Paolo Tricerri
  • [Gmsh] Almost structured mesh - Why aren't they structured?   Feifei TONG
    • [Gmsh] Almost structured mesh - Why aren't they structured?   Paolo Tricerri
      • [Gmsh] Almost structured mesh - Why aren't they structured?   Paolo Tricerri
• [Gmsh] Problem with gmsh   christopher volkwein
• [Gmsh] simple heat sink   Jon Eyvindur Bjarnason
• [Gmsh] SketchUp to GEO file: line loop question   Alessandro Barracco
  • [Gmsh] SketchUp to GEO file: line loop question   Martin Vymazal
• [Gmsh] Failed to compile gmsh on windows using MSVC2008/2010   Arijit Khan
• [Gmsh] Problems with sceond order tetrahedral mesh   longonig at comcast.net
• [Gmsh] resolved: simple heat sink   Jon Eyvindur Bjarnason
• [Gmsh] Help to use Gmsh for BEM   José Jeferson Rêgo Silva
  • [Gmsh] Help to use Gmsh for BEM   Alexander Kalinin
• [Gmsh] gmsh general question   btremaine
• [Gmsh] import external-generated geometry in gmsh   Stefan.Kremer at Schoeck.de
  • [Gmsh] import external-generated geometry in gmsh   Jean-François Remacle
    • [Gmsh] import external-generated geometry in gmsh   Zenker, Dr. Matthias
• [Gmsh] wishlist: add some headers to the default gmsh install to perform mesh adaptation?   trophime
• [Gmsh] failed to build java wrappers in svn rev 13359   trophime
  • [Gmsh] FIXED failed to build java wrappers in svn rev 13359   trophime
    • [Gmsh] FIXED failed to build java wrappers in svn rev 13359   Christophe Geuzaine
• [Gmsh] Utilisation de Gmsh dans CIVA   DOMINGUEZ Nicolas
• [Gmsh] [gmsh] mesh generation with an edge crack   Kyunghoon Lee
• [Gmsh] 64-bit   Stephen Wornom
  • [Gmsh] 64-bit   Anton Gladky
• [Gmsh] torus in larger volume   Nico Schlömer
  • [Gmsh] torus in larger volume   Nico Schlömer
    • [Gmsh] torus in larger volume   Nico Schlömer
      • [Gmsh] torus in larger volume   Nico Schlömer
• [Gmsh] Surface Loop: order in the surface list   Paolo Tricerri
• [Gmsh] Segmentation fault with -optimize_netgen. gmsh 2.6.1-source.   "А.С. Хорошев"
• [Gmsh] RE Surface Loop: order in the surface list   jean pierre aubry
• [Gmsh] Gmsh CAD Model Import   Eric Smith
• [Gmsh] Structured mesh for a tire rib   Ziyu ZHANG
• [Gmsh] basic calculation in Gmsh?   Nico Schlömer
  • [Gmsh] basic calculation in Gmsh?   Nico Schlömer
• [Gmsh] gettingv2.6.1 started   Stephen Wornom
  • [Gmsh] gettingv2.6.1 started   Geordie McBain
• [Gmsh] Gmsh mesh file format specification   Nico Schlömer
• [Gmsh] gfortran shared library error   Umut Tabak
  • [Gmsh] gfortran shared library error   Umut Tabak
    • [Gmsh] gfortran shared library error   Anton Gladky
• [Gmsh] Add an option for CMAKE to point to the OCC installation   Niels Linnemann
  • [Gmsh] Add an option for CMAKE to point to the OCC installation   David Colignon
  • [Gmsh] Add an option for CMAKE to point to the OCC installation   Bastien Gorissen
    • [Gmsh] Add an option for CMAKE to point to the OCC installation   Niels Linnemann
• [Gmsh] How to apply the loads and boundary conditions in GMESH   Durga prasad at 9916527039
  • [Gmsh] How to apply the loads and boundary conditions in GMESH   gdmcbain at gmail.com
    • [Gmsh] Solved: Compiling parallel (MPI) version of Petsc for 64 bit Windows with GNU compilers   michael.asam at infineon.com
• [Gmsh] Wrong definition of Ruled Surface 23: 6 borders instead of 3 or 4   Zenker, Dr. Matthias
  • [Gmsh] Wrong definition of Ruled Surface 23: 6 borders instead of 3 or 4   Zenker, Dr. Matthias
    • [Gmsh] Wrong definition of Ruled Surface 23: 6 borders instead of 3 or 4   Christophe Geuzaine
      • [Gmsh] Wrong definition of Ruled Surface 23: 6 borders instead of 3 or 4   Zenker, Dr. Matthias
• [Gmsh] discontinuity, 2d mesh, frontal   Shinjiro Miyawaki
• [Gmsh] Line elements   Vijayendra
  • [Gmsh] Line elements   Zenker, Dr. Matthias
• [Gmsh] CopyMeshingMethod Problem   Stefan Zörner
• [Gmsh] GMSH - excluding some common nodes from Meshing   koushik gattu
• [Gmsh] Problem with gmsh and freefem++   Pietro Mascheroni
  • [Gmsh] Problem with Gmsh and FreeFem++   Pietro Mascheroni
• [Gmsh] Help request   giuseppe_grasso.ee at libero.it
• [Gmsh] Compilation pb   Lakhdar Remaki
  • [Gmsh] Compilation pb   Jon Eyvindur Bjarnason
    • [Gmsh] Compilation pb   Захаров Андрей
• [Gmsh] Dear responsible   Lakhdar Remaki
  • [Gmsh] Dear responsible   Frédéric Dubois
• [Gmsh] Element size factor: undocumented option?   Rui Maciel
• [Gmsh] Prism generation without extrusion: possible?   Rui Maciel
• [Gmsh] Extrude creates bottom surface with inward-pointing normal   Mark Stock
• [Gmsh] fedora packaging and gmsh/contrib sources   Andre Massing
  • [Gmsh] fedora packaging and gmsh/contrib sources   Christophe Geuzaine
    • [Gmsh] fedora packaging and gmsh/contrib sources   Andre Massing
      • [Gmsh] fedora packaging and gmsh/contrib sources   Christophe Geuzaine
• [Gmsh] Question about Gmsh   D MahmoodZadeh
  • [Gmsh] Question about Gmsh   youngjun at mail.ustc.edu.cn
    • [Gmsh] Question about Gmsh   David Colignon
      • [Gmsh] Question about Gmsh   David Colignon
      • [Gmsh] Question about Gmsh   Zenker, Dr. Matthias
• [Gmsh] Transfinite Volume command - Example of use -   Paolo Tricerri
  • [Gmsh] Transfinite Volume command - Example of use -   Ruth V. Sabariego
    • [Gmsh] Transfinite Volume command - Example of use -   Paolo Tricerri
• [Gmsh] selection of some surfaces?   trophime
• [Gmsh] 3d Meshing Issue   courtney gras
  • [Gmsh] 3d Meshing Issue   Geordie McBain
  • [Gmsh] 3d Meshing Issue   Zenker, Dr. Matthias
    • [Gmsh] 3d Meshing Issue   Zenker, Dr. Matthias
      • [Gmsh] 3d Meshing Issue   Zenker, Dr. Matthias
• [Gmsh] Elements with negative jacobian after extrusion of a spline   Paul Cristini
• [Gmsh] [gmsh] FTBS : svn rev 13627   trophime
• [Gmsh] Erreur de compilation Gmsh liée à onelab   Bastien Gorissen
• [Gmsh] Include volumes into other a bigger volume GMSH   Nicolas Bachelard
• [Gmsh] FTBS : svn 13635 - java wrappers   Christophe Trophime
• [Gmsh] Two Gmsh issues   Zifeng Yuan
• [Gmsh] 3D structured mesh in a box   Oluwaseun Sharomi
• [Gmsh] Coloring mesh Entities   Paolo Tricerri
  • [Gmsh] Coloring mesh Entities   Geordie McBain
• [Gmsh] Creating physical surfaces from loops   cédric doucet
• [Gmsh] GSHHS Plugin in Gmsh   Xiaoyu Liu
• [Gmsh] What can be done in parallel in Gmsh+GetDP?   Mikhail Artemiev
• [Gmsh] Multilevel mesh partition element interface quality   Andre Nicolle
• [Gmsh] Re Creating physical surfaces from loops   jean pierre aubry
  • [Gmsh] Re Creating physical surfaces from loops   cédric doucet
• [Gmsh] 2D: physical volume tags   Nico Schlömer
  • [Gmsh] 2D: physical volume tags   Nico Schlömer
• [Gmsh] Mesh Directional Refinement   Casey Habluetzel
• [Gmsh] Question about interface with Tetgen   Zhanghong Tang
• [Gmsh] Trying to create a structured quad mesh in 2D   Jorge Milhazes
• [Gmsh] Simulation   mgeetha at aol.com
  • [Gmsh] Simulation   Geordie McBain
• [Gmsh] Plot differences   Torquil Macdonald Sørensen
• [Gmsh] dialog box position on svn version   jean pierre aubry
• [Gmsh] Generating tetrahedral meshes with uniform element sizes   Sascha Knell
  • [Gmsh] Generating tetrahedral meshes with uniform element sizes   Mikhail Artemiev
• [Gmsh] cannot create a volumic mesh of a "complex" region??   trophime
  • [Gmsh] cannot create a volumic mesh of a "complex" region??   David Colignon
    • [Gmsh] cannot create a volumic mesh of a "complex" region??   trophime
• [Gmsh] Embed points (Re: Question about Gmsh)   Zenker, Dr. Matthias
• [Gmsh] Tags for nodes.   Marcos Vanella
• [Gmsh] Adaptive meshing using a background mesh   N.O. Jaensson
• [Gmsh] Quadrilateral meshes   diagne ababacar
• [Gmsh] About defining different element size   Liu David
• [Gmsh] Getting the coordiantes of a point   Michel Dupront
  • [Gmsh] Getting the coordiantes of a point   Zenker, Dr. Matthias
• [Gmsh] Cylindric geometry   Simon CORBIN
  • [Gmsh] Cylindric geometry   David Colignon
    • [Gmsh] Cylindric geometry   David Colignon
  • [Gmsh] Cylindric geometry   David Colignon
• [Gmsh] How to use Rotate ?   Michel Dupront
  • [Gmsh] How to use Rotate ?   Mikhail Artemiev
• [Gmsh] [GMSH] trying to smooth a multi-surface mesh   Vladimir Popescu
• [Gmsh] extracting boundary   Oluwaseun Sharomi
• [Gmsh] About Extruted   Michel Dupront
  • [Gmsh] About Extruted   Eiser, Sebastian
• [Gmsh] boundary layer in a 2D geometry   emmanuel.deltombe at free.fr
  • [Gmsh] boundary layer in a 2D geometry   Geordie McBain
• [Gmsh] [gmsh]: Fail to use CGNS I/O   SOISMIER matthieu DSNA/CC
  • [Gmsh] [gmsh]: Fail to use CGNS I/O   Christophe Geuzaine
• [Gmsh] Doubt about Gmsh   anderson nunes
  • [Gmsh] Doubt about Gmsh   Christophe Geuzaine
• [Gmsh] gmsh and ICEM (an ANSYS program)   Annette Stone
• [Gmsh] Simple question about physical groups   Michel Dupront
• [Gmsh] nightly build version 6.6.2 64 bit   Jos Huibers
• [Gmsh] surface orientation   gmsh at praveen.e4ward.com
  • [Gmsh] surface orientation   gmsh at praveen.e4ward.com
• [Gmsh] Naca0012 airfoil mesh: structured and unstructured mesh   Anca Belme
  • [Gmsh] Naca0012 airfoil mesh: structured and unstructured mesh   Marie-Claire Le Pape
• [Gmsh] higher order elements   gmsh at praveen.e4ward.com
• [Gmsh] Proposal for development   Klaas Rathke
• [Gmsh] Is there any "special magic" to Extrude?   wibr
• [Gmsh] unusable mesh for small "Characteristic Length"   Winfried Boxleitner
  • [Gmsh] unusable mesh for small "Characteristic Length"   Jean-François Remacle
• [Gmsh] Compilation error   Gustavo Aparecido Pimentel
  • [Gmsh] Compilation error   Mikhail Artemiev
• [Gmsh] Importing a mesh created using GMSH into NIRFAST   krishna teja
• [Gmsh] python wrappers : how to specify the Mesh algorithm and mesh size?   trophime
  • [Gmsh] python wrappers : how to specify the Mesh algorithm and mesh size?   Vladimir Popescu
    • [Gmsh] python wrappers : how to specify the Mesh algorithm and mesh size?   Daniel Wheeler
• [Gmsh] Showing displacement shape of 4-node line element? (for beam element)   Mohamed Moussa
  • [Gmsh] Showing displacement shape of 4-node line element? (for beam element)   Christophe Geuzaine
• [Gmsh] "Wrong number of adaptions" error   Mohamed Moussa
  • [Gmsh] "Wrong number of adaptions" error   Christophe Geuzaine
    • [Gmsh] "Wrong number of adaptions" error   Mohamed Moussa
• [Gmsh] mesh error after volume rotation   Melzig, Thomas
  • [Gmsh] gmsh crashing, Mesh.RandomFactor   dp9sp1x+dctwx4 at guerrillamail.com
• [Gmsh] Definition parameter space?   Walter White
  • [Gmsh] Definition parameter space?   Walter White
• [Gmsh] CR needed to exit Gmsh in cmdline mode   Ion Lee
  • [Gmsh] Adaptation with python interface   Martin Vymazal
• [Gmsh] Surface Offset   gerard.fleury at inrs.fr
• [Gmsh] How to generate highly distored unstructured mesh   ztdep at yahoo.com.cn
• [Gmsh] How to import mesh from other format   ztdep at yahoo.com.cn
• [Gmsh] Possible bugs with wrap filter   Mohamed Moussa
• [Gmsh] Named faces in Step to physical surfaces   Matthias Sedlmaier
• [Gmsh] intersecting faces...   Einat Lev
  • [Gmsh] intersecting faces...   Zenker, Dr. Matthias
    • [Gmsh] intersecting faces...   Einat Lev
• [Gmsh] anisotropic 2D mesh at face boundary   Claudio Comis
• [Gmsh] Fine mesh only at boundary?   Nico Schlömer
  • [Gmsh] Fine mesh only at boundary?   Nico Schlömer
    • [Gmsh] Fine mesh only at boundary?   Nico Schlömer
      • [Gmsh] Fine mesh only at boundary?   Nico Schlömer
• [Gmsh] 3D Boundary Layer creation   claudio
• [Gmsh] problem to generate a coarse mesh between two fine meshed regions   Nicolas Beudez
• [Gmsh] using gmsh blossom quad with shared lib   Ole Lindberg
• [Gmsh] Refinement only on Surfaces   Paolo Crosetto
• [Gmsh] gmsh meshing   alain dimier
• [Gmsh] Non-uniform mesh in a multi-STL geometry   Einat Lev
• [Gmsh] mesh with embeded points   Dharmendar Reddy
• [Gmsh] structured mesh   marleson
• [Gmsh] Hex grid with a cubic hole in sphere   家在仁和
• [Gmsh] Gmsh not saving Mesh to file   Mark Schroeder

Last message date: Mon Dec 31 09:34:31 CET 2012
Archived on: Mon Dec 31 11:27:34 CET 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...