2020 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Jan 1 09:47:49 CET 2020
Ending: Wed Dec 30 20:47:27 CET 2020
Messages: 604

• [Gmsh] Sphere in a sphere mesh   Silvia Ceccacci (HDR)
• [Gmsh] Increase number of nodes   Silvia Ceccacci (HDR)
• [Gmsh] Help refining a 3D mesh around a plane   Silvia Ceccacci (HDR)
• [Gmsh] Meshing fails without apparent reason   Bruno Agostini
• [Gmsh] Questions about parallelization using python API   Kadry Abdelmeguid Karim Hesham Ahmed
• [Gmsh] Does OCC fillet splines?   Kadry Abdelmeguid Karim Hesham Ahmed
• [Gmsh] Does OCC fillet splines?   Kadry Abdelmeguid Karim Hesham Ahmed
• [Gmsh] Problem with 4.5.1   Vicini Alessandro
• [Gmsh] R: Slice 3D to get 2D geometry   Vicini Alessandro
• [Gmsh] R: R: Slice 3D to get 2D geometry   Vicini Alessandro
• [Gmsh] R: R: R: Slice 3D to get 2D geometry   Vicini Alessandro
• [Gmsh] R: Slice 3D to get 2D geometry   Vicini Alessandro
• [Gmsh] R: R: Slice 3D to get 2D geometry   Vicini Alessandro
• [Gmsh] gmsh and guacamole   Vicini Alessandro
• [Gmsh] R: Small element size factor does not work   Vicini Alessandro
• [Gmsh] Surface mesh quality control   Zuheyr Alsalihi
• [Gmsh] STL Mesh generation surfaces with inward normalnot meshed?!   Zuheyr Alsalihi
• [Gmsh] Scaling all the entities of a step file   Zuheyr Alsalihi
• [Gmsh] Merging multiple step files in .geo script   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? STL Mesh generation surfaces with inward normalnot meshed?!   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? Merging multiple step files in .geo script   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? Forcing all jacobians to be positive   Zuheyr Alsalihi
• [Gmsh] Creating angle dependent surface mesh zones for axisymmetric geometries   Zuheyr Alsalihi
• [Gmsh] Step model view export as png from command line/script   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? Step model view export as png from command line/script   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? ?==?utf-8?q? ?= Step model view export as png from command line/scrip   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? ?==?utf-8?q? ?= Step model view export as png from command line/scrip   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? ?==?utf-8?q? ?= Step model view export as png from command line/scrip   Zuheyr Alsalihi
• [Gmsh] Scripting multiple views in one picture   Zuheyr Alsalihi
• [Gmsh] GMSH units   Zuheyr Alsalihi
• [Gmsh] ?==?utf-8?q? GMSH units   Zuheyr Alsalihi
• [Gmsh] Help with surface visibility   Andress
• [Gmsh] Help with surface visibility   Andress
• [Gmsh] Help with surface visibility   Andress
• [Gmsh] How to set MSH file format to 2   Andress
• [Gmsh] How to set MSH file format to 2   Andress
• [Gmsh] Bisecting Subdomains of Imported Geometry/Mesh   Andress
• [Gmsh] Does BooleanUnion works on surfaces?   Marco Antolovic
• [Gmsh] Does BooleanUnion works on surfaces?   Marco Antolovic
• [Gmsh] unrecognized variable loaded from another file using Merge command   Marco Antolovic
• [Gmsh] Question on creating meshes with layered elements   Marco Antolovic
• [Gmsh] Can you delete the variables created in the GUI menu?   Marco Antolovic
• [Gmsh] Can you delete the variables created in the GUI menu?   Marco Antolovic
• [Gmsh] unrecognized variable loaded from another file using Merge command   Marco Antolovic
• [Gmsh] Question on creating meshes with layered elements   Marco Antolovic
• [Gmsh] unrecognized variable loaded from another file using Merge command   Marco Antolovic
• [Gmsh] unrecognized variable loaded from another file using Merge command   Marco Antolovic
• [Gmsh] Question on creating meshes with layered elements   Marco Antolovic
• [Gmsh] Question on creating meshes with layered elements   Marco Antolovic
• [Gmsh] Mesh doesn't show when I change Geometry.OCCTargetUnit from "M" to "MM";   Marco Antolovic
• [Gmsh] Mesh doesn't show when I change Geometry.OCCTargetUnit from "M" to "MM";   Marco Antolovic
• [Gmsh] How to create Surface from Discrete surface ?   Kenneth Assogba
• [Gmsh] gmsh-sdk installation question   Kenneth Assogba
• [Gmsh] Parallelepiped with hole in the middle   Robert Atanasiu
• [Gmsh] constructing trimmed NURBS surfaces   Banks, Stephen (Energy, Clayton North)
• [Gmsh] constructing trimmed NURBS surfaces   Banks, Stephen (Energy, Clayton North)
• [Gmsh] constructing trimmed NURBS surfaces   Banks, Stephen (Energy, Clayton North)
• [Gmsh] Silently created boundary entities   Banks, Stephen (Energy, Clayton North)
• [Gmsh] Silently created boundary entities   Banks, Stephen (Energy, Clayton North)
• [Gmsh] Silently created boundary entities   Banks, Stephen (Energy, Clayton North)
• [Gmsh] Error: No tetrahedra in region X   Nick Barra
• [Gmsh] GmshToFoam Error   Nick Barra
• [Gmsh] spline with many points   Purvis Bedenbaugh
• [Gmsh] Structured grid for triangular domains   Murilo Henrique Campana Bento
• [Gmsh] Ghost surfaces after cut?   Beriot, Hadrien
• [Gmsh] Issue with periodicities   Alain Berod
• [Gmsh] Issue with periodicities   Alain Berod
• [Gmsh] Subdividing high-order tetrahedral mesh into hexahedron robustly   Bruno Blais
• [Gmsh] question   George Bourantas
• [Gmsh] Reduce number of digits in key-format file   Winfried Boxleitner
• [Gmsh] Reduce number of digits in key-format file   Winfried Boxleitner
• [Gmsh] PETSc/DMPlex and .msh   Jed Brown
• [Gmsh] Remeshing of STL file fails   Bruno
• [Gmsh] Remeshing of STL file fails   Bruno
• [Gmsh] Could not recover boundary mesh: error 2   Bruno
• [Gmsh] Transfinite 3D meshing   Bruno
• [Gmsh] Transfinite 3D meshing   Bruno
• [Gmsh] Fragment + addSurfaceLoop   Bruno
• [Gmsh] Fragment + addSurfaceLoop   Bruno
• [Gmsh] Extrusion of one element that is split into multiple regions   Bucksot, Jesse Edward
• [Gmsh] Geo edges missing after rotation operation   Fahad Sarfraz Butt
• [Gmsh] PETSc/DMPlex and .msh   Praveen C
• [Gmsh] PETSc/DMPlex and .msh   Praveen C
• [Gmsh] Saving msh in several parts defined by lists of physical   Michel Cassagnes
• [Gmsh] Saving msh in several parts defined by lists of physical   Michel Cassagnes
• [Gmsh] Transfinite Line & SetSize with API on Python   Michel Cassagnes
• [Gmsh] Transfinite Line & SetSize with API on Python   Michel Cassagnes
• [Gmsh] Transfinite Line & SetSize with API on Python   Michel Cassagnes
• [Gmsh] Unable to select surfaces using GUI   A Chaube
• [Gmsh] Questions about gmsh   David Colignon
• [Gmsh] Composite RVE (Hossam Ragheb)   Baptiste DURAND
• [Gmsh] Composite RVE (Hossam Ragheb)   Baptiste DURAND
• [Gmsh] Forcing all jacobians to be positive   Carole-Anne Daunais
• [Gmsh] Forcing all jacobians to be positive   Carole-Anne Daunais
• [Gmsh] Forcing all jacobians to be positive   Carole-Anne Daunais
• [Gmsh] Creating 3D geometry   Deepa
• [Gmsh] Create mesh for 1D geometry   Deepa
• [Gmsh] Create mesh for 1D geometry   Deepa
• [Gmsh] Create mesh for 1D geometry   Deepa
• [Gmsh] Gaps and overlaps when using extrude command   Bart Deschoolmeester
• [Gmsh] Gaps and overlaps when using extrude command   Bart Deschoolmeester
• [Gmsh] Gaps and overlaps when using extrude command   Bart Deschoolmeester
• [Gmsh] Mesh generation error because of rotational extrusion?   Bart Deschoolmeester
• [Gmsh] Coherence 'could not find extruded vertex' error   Bart Deschoolmeester
• [Gmsh] Coherence 'could not find extruded vertex' error   Bart Deschoolmeester
• [Gmsh] Coherence 'could not find extruded vertex' error   Bart Deschoolmeester
• [Gmsh] surface mesh coarsening   Hans Dierckx
• [Gmsh] surface mesh coarsening   Hans Dierckx
• [Gmsh] saving GMSH mesh into a CAD file format like STEP   Frederic Dubois
• [Gmsh] Problem meshing imported STEP file   Michael Enders
• [Gmsh] Problem meshing imported STEP file   Michael Enders
• [Gmsh] The Control of OCC BSpline points on the intersection edge   Jun Fang
• [Gmsh] The Control of OCC BSpline points on the intersection edge   Jun Fang
• [Gmsh] Problem meshing a spur gear   Carlos Fernandes
• [Gmsh] 2D Unstructured periodic quad mesh   David Fernandez
• [Gmsh] Structured surface meshes and export to XYZ or structured CGNS   Guillaume Florent
• [Gmsh] Hextreme into Gmsh   Guillaume Florent
• [Gmsh] Structured surface meshes and export to XYZ or structured CGNS   Guillaume Florent
• [Gmsh] Zoom in/out in Interface   Francois
• [Gmsh] Enquiry: making a stl file   Rioual Francois
• [Gmsh] Remeshing of deformed meshes and tracking of subdomains   Tim Furlan
• [Gmsh] Remeshing of deformed meshes and tracking of subdomains   Tim Furlan
• [Gmsh] Python API and Spyder   Tim Furlan
• [Gmsh] frontal meshing animation   Martin Genet
• [Gmsh] Cmake configuration problem with gmsh 4.5.1   Christophe Geuzaine
• [Gmsh] Structured mesh for a 5-vertices polygon   Christophe Geuzaine
• [Gmsh] Transforming mesh   Christophe Geuzaine
• [Gmsh] Transforming mesh   Christophe Geuzaine
• [Gmsh] Periodicity at the boundary of a box   Christophe Geuzaine
• [Gmsh] Structured surface meshes and export to XYZ or structured CGNS   Christophe Geuzaine
• [Gmsh] Hextreme into Gmsh   Christophe Geuzaine
• [Gmsh] Duplicate elements in unv file   Christophe Geuzaine
• [Gmsh] Problems with compounded curves and surfaces   Christophe Geuzaine
• [Gmsh] Structured triangular grid   Christophe Geuzaine
• [Gmsh] Line / edge / curve direction - how to change it to use Progression properly (transfinite curve)   Christophe Geuzaine
• [Gmsh] HXT failure at the boolean demo with baffles   Christophe Geuzaine
• [Gmsh] Perodic surface command does not find connections on the opposite surface   Christophe Geuzaine
• [Gmsh] Broken mesh for coarser mesh size at centre of circle   Christophe Geuzaine
• [Gmsh] Problem with "Compound functions"   Christophe Geuzaine
• [Gmsh] negative z values in version 4.3.0   Christophe Geuzaine
• [Gmsh] Small cylinder in huge domain   Christophe Geuzaine
• [Gmsh] What is the angle in ClassifySurfaces?   Christophe Geuzaine
• [Gmsh] negative z values in version 4.3.0   Christophe Geuzaine
• [Gmsh] Enquiry: making a stl file   Christophe Geuzaine
• [Gmsh] cannot change the meshing size   Christophe Geuzaine
• [Gmsh] Issue with periodicities   Christophe Geuzaine
• [Gmsh] Geo scripts : syntax PointsOf for a Curve Loop   Christophe Geuzaine
• [Gmsh] Questions about gmsh   Christophe Geuzaine
• [Gmsh] geo script - how to get a mesh after plugin(triangulate) ?   Christophe Geuzaine
• [Gmsh] gmsh python module   Christophe Geuzaine
• [Gmsh] Selecting faces after boolean operation   Christophe Geuzaine
• [Gmsh] Linear elasticity equation using the template project file   Christophe Geuzaine
• [Gmsh] Selecting faces after boolean operation   Christophe Geuzaine
• [Gmsh] geo script - how to reference elements after reading a msh file   Christophe Geuzaine
• [Gmsh] terrain meshing with an stl file   Christophe Geuzaine
• [Gmsh] Slivers generated by GMSH   Christophe Geuzaine
• [Gmsh] Slivers generated by GMSH   Christophe Geuzaine
• [Gmsh] Sphere in a sphere mesh   Christophe Geuzaine
• [Gmsh] saving GMSH mesh into a CAD file format like STEP   Christophe Geuzaine
• [Gmsh] Slice 3D to get 2D geometry   Christophe Geuzaine
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Christophe Geuzaine
• [Gmsh] Remeshing of STL file fails   Christophe Geuzaine
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Christophe Geuzaine
• [Gmsh] Help with surface visibility   Christophe Geuzaine
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Christophe Geuzaine
• [Gmsh] Slice 3D to get 2D geometry   Christophe Geuzaine
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Christophe Geuzaine
• [Gmsh] The Control of OCC BSpline points on the intersection edge   Christophe Geuzaine
• [Gmsh] Help with surface visibility   Christophe Geuzaine
• [Gmsh] Using OpenCASCADE Boolean to create transfinite surfaces (Boundary) which maintain Transfinite mesh   Christophe Geuzaine
• [Gmsh] Strange meshing behaviour   Christophe Geuzaine
• [Gmsh] Strange meshing behaviour   Christophe Geuzaine
• [Gmsh] surface mesh coarsening   Christophe Geuzaine
• [Gmsh] Can I turn an STL or the Created Geometry in Gmsh?   Christophe Geuzaine
• [Gmsh] Adding second-order nodes to tet4   Christophe Geuzaine
• [Gmsh] Reduce number of digits in key-format file   Christophe Geuzaine
• [Gmsh] Reduce number of digits in key-format file   Christophe Geuzaine
• [Gmsh] Reduce number of digits in key-format file   Christophe Geuzaine
• [Gmsh] Hdf5 files and gmsh   Christophe Geuzaine
• [Gmsh] How to set MSH file format to 2   Christophe Geuzaine
• [Gmsh] Save all nodes but not 2D shell meshes in the physical surfaces   Christophe Geuzaine
• [Gmsh] Increase number of nodes   Christophe Geuzaine
• [Gmsh] Mesh error   Christophe Geuzaine
• [Gmsh] Question regarding values of boundingBox and General.MaxX/Y/Z and Geometry.Tolerance   Christophe Geuzaine
• [Gmsh] 3D meshing gmsh   Christophe Geuzaine
• [Gmsh] Questions on 4.1 format   Christophe Geuzaine
• [Gmsh] Extrusion of one element that is split into multiple regions   Christophe Geuzaine
• [Gmsh] Variable thickness surface   Christophe Geuzaine
• [Gmsh] Python API and Spyder   Christophe Geuzaine
• [Gmsh] Problem meshing a spur gear   Christophe Geuzaine
• [Gmsh] Structured grid for triangular domains   Christophe Geuzaine
• [Gmsh] Rotation of Surface in Gmsh   Christophe Geuzaine
• [Gmsh] Help/advice with definition of mesh size   Christophe Geuzaine
• [Gmsh] geo from msh   Christophe Geuzaine
• [Gmsh] Saving msh in several parts defined by lists of physical   Christophe Geuzaine
• [Gmsh] Mesh error   Christophe Geuzaine
• [Gmsh] Parallelepiped with hole in the middle   Christophe Geuzaine
• [Gmsh] Bug?   Christophe Geuzaine
• [Gmsh] 3D Mesh for Box with Inclusions   Christophe Geuzaine
• [Gmsh] Mesh renumbering to MED format   Christophe Geuzaine
• [Gmsh] fillet producing irregular mesh   Christophe Geuzaine
• [Gmsh] Geo edges missing after rotation operation   Christophe Geuzaine
• [Gmsh] Refine mesh via Gaussian rim inside disk   Christophe Geuzaine
• [Gmsh] Bisecting Subdomains of Imported Geometry/Mesh   Christophe Geuzaine
• [Gmsh] Refine mesh via Gaussian rim inside disk   Christophe Geuzaine
• [Gmsh] Point In Edge - a workaround with issues   Christophe Geuzaine
• [Gmsh] Restrict Field   Christophe Geuzaine
• [Gmsh] Problem meshing imported STEP file   Christophe Geuzaine
• [Gmsh] Problem meshing imported STEP file   Christophe Geuzaine
• [Gmsh] export .step file without duplicated geometry   Christophe Geuzaine
• [Gmsh] BooleanFragments on tiny scale   Christophe Geuzaine
• [Gmsh] Transfinite Line & SetSize with API on Python   Christophe Geuzaine
• [Gmsh] Transfinite Line & SetSize with API on Python   Christophe Geuzaine
• [Gmsh] BUG (??) in version 4.5.6   Christophe Geuzaine
• [Gmsh] GMsh python API: all all point tags of volume   Christophe Geuzaine
• [Gmsh] How to use the plugin crack from the command line   Christophe Geuzaine
• [Gmsh] BUG (??) in version 4.5.6   Christophe Geuzaine
• [Gmsh] Making an animation from non-uniform time steps   Christophe Geuzaine
• [Gmsh] How to create Surface from Discrete surface ?   Christophe Geuzaine
• [Gmsh] meshing partitions   Christophe Geuzaine
• [Gmsh] meshing partitions   Christophe Geuzaine
• [Gmsh] Zero volume tets   Christophe Geuzaine
• [Gmsh] Zero volume tets   Christophe Geuzaine
• [Gmsh] Gmsh binary with OpenMP enabled   Christophe Geuzaine
• [Gmsh] meshing partitions   Christophe Geuzaine
• [Gmsh] Adding a boundary surface on a STL model   Christophe Geuzaine
• [Gmsh] Scaling all the entities of a step file   Christophe Geuzaine
• [Gmsh] STL Mesh generation surfaces with inward normalnot meshed?!   Christophe Geuzaine
• [Gmsh] Remeshing of deformed meshes and tracking of subdomains   Christophe Geuzaine
• [Gmsh] Forcing all jacobians to be positive   Christophe Geuzaine
• [Gmsh] Subdividing high-order tetrahedral mesh into hexahedron robustly   Christophe Geuzaine
• [Gmsh] Forcing all jacobians to be positive   Christophe Geuzaine
• [Gmsh] Installation of jointforces, with GMSH   Christophe Geuzaine
• [Gmsh] Mesh & Topshape, Brep   Christophe Geuzaine
• [Gmsh] Zoom in/out in Interface   Christophe Geuzaine
• [Gmsh] Surface orientation   Christophe Geuzaine
• [Gmsh] Meshing Looping how to debug.   Christophe Geuzaine
• [Gmsh] number of gauss point per element   Christophe Geuzaine
• [Gmsh] 7-node second order triangle   Christophe Geuzaine
• [Gmsh] 3d Delaunay Mesh   Christophe Geuzaine
• [Gmsh] gmsh 4.5.6: Creating a mesh from .vtk files - Surface is not remeshing but only the Volume   Christophe Geuzaine
• [Gmsh] Creating angle dependent surface mesh zones for axisymmetric geometries   Christophe Geuzaine
• [Gmsh] Problem with physical groups to label surface in GMSH   Christophe Geuzaine
• [Gmsh] Appendage Mesh   Christophe Geuzaine
• [Gmsh] transfinite algorithm limitation for structured meshes   Christophe Geuzaine
• [Gmsh] gmsh 4.5.6: Creating a mesh from .vtk files - Surface is not remeshing but only the Volume   Christophe Geuzaine
• [Gmsh] gmsh 4.5.6: Creating a mesh from .vtk files - Surface is not remeshing but only the Volume   Christophe Geuzaine
• [Gmsh] Error: Cannot reparametrize a mesh node in high order meshing   Christophe Geuzaine
• [Gmsh] Single element normal   Christophe Geuzaine
• [Gmsh] Bounding Box of an imported STL Smaller than geometry?   Christophe Geuzaine
• [Gmsh] Meshing fails without apparent reason   Christophe Geuzaine
• [Gmsh] parallel meshing?   Christophe Geuzaine
• [Gmsh] Getting rid of small faces and features   Christophe Geuzaine
• [Gmsh] Error codes.   Christophe Geuzaine
• [Gmsh] 3D Volume from 2D Mesh via python program   Christophe Geuzaine
• [Gmsh] Create gmsh 2D.   Christophe Geuzaine
• [Gmsh] There was eventually a crash report   Christophe Geuzaine
• [Gmsh] Points seem to move on transfinite surface after the recombination   Christophe Geuzaine
• [Gmsh] Unable to select surfaces using GUI   Christophe Geuzaine
• [Gmsh] Not grasping something correctly.   Christophe Geuzaine
• [Gmsh] Getting lines' nodes   Christophe Geuzaine
• [Gmsh] Point In Volume Python API   Christophe Geuzaine
• [Gmsh] Coherence 'could not find extruded vertex' error   Christophe Geuzaine
• [Gmsh] 2D Mesh (P2) has some reverse ordering, negative determinants   Christophe Geuzaine
• [Gmsh] Comparison of different meshes   Christophe Geuzaine
• [Gmsh] integration, spikes   Christophe Geuzaine
• [Gmsh] Does BooleanUnion works on surfaces?   Christophe Geuzaine
• [Gmsh] $NodeData in msh file ver 4.1   Christophe Geuzaine
• [Gmsh] Question about adding new solver in onelab   Christophe Geuzaine
• [Gmsh] joining arrow tips   Christophe Geuzaine
• [Gmsh] question   Christophe Geuzaine
• [Gmsh] Periodic Surface Error: Different number of points for periodic correspondance between surfaces.   Christophe Geuzaine
• [Gmsh] Questions about parallelization using python API   Christophe Geuzaine
• [Gmsh] Scripting multiple views in one picture   Christophe Geuzaine
• [Gmsh] Question about adding new solver in onelab   Christophe Geuzaine
• [Gmsh] Negative Jacobians in 2nd Order Mesh   Christophe Geuzaine
• [Gmsh] Points not used by tetrahedrons   Christophe Geuzaine
• [Gmsh] GRegion meshsize   Christophe Geuzaine
• [Gmsh] GRegion meshsize   Christophe Geuzaine
• [Gmsh] GRegion meshsize   Christophe Geuzaine
• [Gmsh] building of gmsh on mingw64   Christophe Geuzaine
• [Gmsh] GMSH units   Christophe Geuzaine
• [Gmsh] Transfinite 3D meshing   Christophe Geuzaine
• [Gmsh] How are set up U and V vectors for elements ?   Christophe Geuzaine
• [Gmsh] Surface does not remesh as fine as volume   Christophe Geuzaine
• [Gmsh] [Gmsh ]One layer of solid elements through thickness instead of two   Christophe Geuzaine
• [Gmsh] spline with many points   Christophe Geuzaine
• [Gmsh] Volume not meshing after adding embedded surface   Christophe Geuzaine
• [Gmsh] Can you delete the variables created in the GUI menu?   Christophe Geuzaine
• [Gmsh] High Aspect Ratio Cells   Christophe Geuzaine
• [Gmsh] curved mesh and jacobian   Christophe Geuzaine
• [Gmsh] Boundary layer field - tangential direction mesh size   Christophe Geuzaine
• [Gmsh] Question on creating meshes with layered elements   Christophe Geuzaine
• [Gmsh] unrecognized variable loaded from another file using Merge command   Christophe Geuzaine
• [Gmsh] curved mesh and jacobian   Christophe Geuzaine
• [Gmsh] Fragment + addSurfaceLoop   Christophe Geuzaine
• [Gmsh] Problem with creating a mesh in OpenCASCADE kernel   Christophe Geuzaine
• [Gmsh] Error after Mesh Conversion to OpenFOAM   Christophe Geuzaine
• [Gmsh] Rectangular cutouts in cylinders   Christophe Geuzaine
• [Gmsh] Mesh doesn't show when I change Geometry.OCCTargetUnit from "M" to "MM";   Christophe Geuzaine
• [Gmsh] Shared boundaries between two stl model   Christophe Geuzaine
• [Gmsh] constructing trimmed NURBS surfaces   Christophe Geuzaine
• [Gmsh] Negative Jacobians in 2nd Order Mesh   Christophe Geuzaine
• [Gmsh] constructing trimmed NURBS surfaces   Christophe Geuzaine
• [Gmsh] gmsh and Plot3d interactions   Christophe Geuzaine
• [Gmsh] gmsh and Plot3d interactions   Christophe Geuzaine
• [Gmsh] Addition of Dummy point in mesh file   Christophe Geuzaine
• [Gmsh] PETSc/DMPlex and .msh   Christophe Geuzaine
• [Gmsh] forcing a single element type on a 3D mesh.   Christophe Geuzaine
• [Gmsh] Role of CreateGeometry in Creating Geometry from Mesh   Christophe Geuzaine
• [Gmsh] Silently created boundary entities   Christophe Geuzaine
• [Gmsh] How to generate a parabaloid or surface from an equation?   Christophe Geuzaine
• [Gmsh] Composite RVE   Christophe Geuzaine
• [Gmsh] Silently created boundary entities   Christophe Geuzaine
• [Gmsh] gmsh and Plot3d interactions MISCOMMUNICATION 101   Christophe Geuzaine
• [Gmsh] generate mesh in area with (large variation in z   Christophe Geuzaine
• [Gmsh] Reg: Plotting vectors on a triangle at seven different locations   Christophe Geuzaine
• [Gmsh] Shutting down the mailing lists   Christophe Geuzaine
• [Gmsh] gmsh python module   Francis Giraldeau
• [Gmsh] Selecting faces after boolean operation   Francis Giraldeau
• [Gmsh] Selecting faces after boolean operation   Francis Giraldeau
• [Gmsh] Boundary layer for complexe pipe geometry   Francis Giraldeau
• [Gmsh] gmsh and Plot3d interactions   Miroslav Grulovic
• [Gmsh] gmsh and Plot3d interactions   Miroslav Grulovic
• [Gmsh] gmsh and Plot3d interactions MISCOMMUNICATION 101   Miroslav Grulovic
• [Gmsh] Perodic surface command does not find connections on the opposite surface   Grunwald, Christoph
• [Gmsh] Slivers generated by GMSH   Grunwald, Christoph
• [Gmsh] Meshing constraint in interphase section of RVEs   DILASSER Guillaume
• [Gmsh] terrain meshing with an stl file   DILASSER Guillaume
• [Gmsh] Questions about gmsh   DILASSER Guillaume
• [Gmsh] Clarification on Element Physical Group Relation   DILASSER Guillaume
• [Gmsh] saving GMSH mesh into a CAD file format like STEP   DILASSER Guillaume
• [Gmsh] 3D meshing gmsh   Aggraj Gupta
• [Gmsh] 3D meshing gmsh   Aggraj Gupta
• [Gmsh] Problem with physical groups to label surface in GMSH   Quang Ha
• [Gmsh] Refine mesh via Gaussian rim inside disk   Lars Hubatsch
• [Gmsh] Question regarding values of boundingBox and General.MaxX/Y/Z and Geometry.Tolerance   Tobias Lichti Fraunhofer ITWM
• [Gmsh] Bug?   Jensen, Aaron J.
• [Gmsh] Clarification on Element Physical Group Relation   Xavier Johnson
• [Gmsh] Strange meshing behaviour   Peter Johnston
• [Gmsh] gmsh-sdk installation question   Peter Johnston
• [Gmsh] gmsh-sdk installation question   Peter Johnston
• [Gmsh] Variable thickness surface   Julian
• [Gmsh] How to generate a parabaloid or surface from an equation?   Paul K
• [Gmsh] Restrict Field   Karin&NiKo
• [Gmsh] Restrict Field   Karin&NiKo
• [Gmsh] Zero volume tets   Karin&NiKo
• [Gmsh] Zero volume tets   Karin&NiKo
• [Gmsh] Fwd: Zero volume tets   Karin&NiKo
• [Gmsh] Embed a point lying on the edge   Karin&NiKo
• [Gmsh] Zero volume tets   Karin&NiKo
• [Gmsh] Geo scripts : syntax PointsOf for a Curve Loop   Don Van Kerkhoven
• [Gmsh] Geo scripts : syntax PointsOf for a Curve Loop   Don Van Kerkhoven
• [Gmsh] geo script - how to get a mesh after plugin(triangulate) ?   Don Van Kerkhoven
• [Gmsh] Strange mesh in a curved square   Don Van Kerkhoven
• [Gmsh] geo script - how to get a mesh after plugin(triangulate) ?   Don Van Kerkhoven
• [Gmsh] geo script - how to reference elements after reading a msh file   Don Van Kerkhoven
• [Gmsh] geo script - how to reference elements after reading a msh file   Don Van Kerkhoven
• [Gmsh] R: Slice 3D to get 2D geometry   Don Van Kerkhoven
• [Gmsh] R: R: Slice 3D to get 2D geometry   Don Van Kerkhoven
• [Gmsh] Avoiding Pyramids   Markus Knoch
• [Gmsh] 7-node second order triangle   Panagiotis Kotronis
• [Gmsh] number of gauss point per element   Panagiotis Kotronis
• [Gmsh] Getting rid of small faces and features   Hannes Kröger
• [Gmsh] Point In Volume Python API   Miroslav Kuchta
• [Gmsh] Point In Volume Python API   Miroslav Kuchta
• [Gmsh] [Gmsh ]One layer of solid elements through thickness instead of two   Pawel Kudela
• [Gmsh] [Gmsh ]One layer of solid elements through thickness instead of two   Pawel Kudela
• [Gmsh] negative z values in version 4.3.0   Komal Kumari
• [Gmsh] negative z values in version 4.3.0   Komal Kumari
• [Gmsh] Addition of Dummy point in mesh file   Komal Kumari
• [Gmsh] generate mesh in area with (large variation in z   Komal Kumari
• [Gmsh] bad orientation   Ugis Lacis
• [Gmsh] bad orientation   Ugis Lacis
• [Gmsh] Line In BoundingBox   Ugis Lacis
• [Gmsh] Line In BoundingBox   Ugis Lacis
• [Gmsh] How to generate a parabaloid or surface from an equation?   Matthieu Lecouvez
• [Gmsh] Adding a physical surface (on which the load will be applied) to an existing volume.   Vincent Libertiaux
• [Gmsh] Adding a physical surface (on which the load will be applied) to an existing volume.   Vincent Libertiaux
• [Gmsh] Using OpenCASCADE Boolean to create transfinite surfaces (Boundary) which maintain Transfinite mesh   William Logie
• [Gmsh] Problem with "Compound functions"   Adel MORENO
• [Gmsh] 2D Mesh (P2) has some reverse ordering, negative determinants   Marc
• [Gmsh] Check Negative Jacobian   Nicolas Marsic
• [Gmsh] Merging multiple step files in .geo script   G. D. McBain
• [Gmsh] Role of CreateGeometry in Creating Geometry from Mesh   Prani Nalluri
• [Gmsh] Points seem to move on transfinite surface after the recombination   Bojan Niceno
• [Gmsh] Points seem to move on transfinite surface after the recombination   Bojan Niceno
• [Gmsh] Getting lines' nodes   Bojan Niceno
• [Gmsh] Appendage Mesh   Diogo Nunes
• [Gmsh] Appendage Mesh   Diogo Nunes
• [Gmsh] saving GMSH mesh into a CAD file format like STEP   Louise Olsen
• [Gmsh] saving GMSH mesh into a CAD file format like STEP   Louise Olsen
• [Gmsh] Creating 3D geometry   Max Orok
• [Gmsh] Creating 3D geometry   Max Orok
• [Gmsh] Transforming mesh   Max Orok
• [Gmsh] Transforming mesh   Max Orok
• [Gmsh] Transforming mesh   Max Orok
• [Gmsh] Transforming mesh   Max Orok
• [Gmsh] Create mesh for 1D geometry   Max Orok
• [Gmsh] Create mesh for 1D geometry   Max Orok
• [Gmsh] GmshToFoam Error   Max Orok
• [Gmsh] Adding second-order nodes to tet4   Max Orok
• [Gmsh] Questions on 4.1 format   Max Orok
• [Gmsh] asking for help   Max Orok
• [Gmsh] Error codes.   Max Orok
• [Gmsh] Does OCC fillet splines?   Max Orok
• [Gmsh] Comparison of different meshes   Max Orok
• [Gmsh] Question about adding new solver in onelab   Max Orok
• [Gmsh] Scripting multiple views in one picture   Max Orok
• [Gmsh] GMSH units   Max Orok
• [Gmsh] Transfinite 3D meshing   Max Orok
• [Gmsh] SolidWorks tagging elementary entities   Max Orok
• [Gmsh] Problem with gmsh mesh in freefem++   Max Orok
• [Gmsh] gmsh 4.5.6: Creating a mesh from .vtk files - Surface is not remeshing but only the Volume   Lisa Pankewitz
• [Gmsh] gmsh 4.5.6: Creating a mesh from .vtk files - Surface is not remeshing but only the Volume   Lisa Pankewitz
• [Gmsh] gmsh 4.5.6: Creating a mesh from .vtk files - Surface is not remeshing but only the Volume   Lisa Pankewitz
• [Gmsh] gmsh 4.5.6: Creating a mesh from .vtk files - Surface is not remeshing but only the Volume   Lisa Pankewitz
• [Gmsh] Surface does not remesh as fine as volume   Lisa Pankewitz
• [Gmsh] Surface does not remesh as fine as volume   Lisa Pankewitz
• [Gmsh] Check Negative Jacobian   Parekh, Vivek Mukeshbhai
• [Gmsh] Avoiding Pyramids   Guillaume Parent
• [Gmsh] Gmsh OCC class Physical Groups   Rinaldi Polese Petrolli
• [Gmsh] Gmsh OCC class Physical Groups   Rinaldi Polese Petrolli
• [Gmsh] Problems with compounded curves and surfaces   Pouria
• [Gmsh] Composite RVE   Hossam Ragheb
• [Gmsh] Composite RVE (Hossam Ragheb)   Hossam Ragheb
• [Gmsh] Composite RVE   Hossam Ragheb
• [Gmsh] Volume not meshing after adding embedded surface   Fariba Rahman
• [Gmsh] Volume not meshing after adding embedded surface   Fariba Rahman
• [Gmsh] Reg: Plotting vectors on a triangle at seven different locations   Raavi M. Mohindar Rao
• [Gmsh] export .step file without duplicated geometry   Kelal Raschket
• [Gmsh] Questions about gmsh   Jean-François Remacle
• [Gmsh] Remeshing for STL   Jean-François Remacle
• [Gmsh] Could not recover boundary mesh: error 2   Jean-François Remacle
• [Gmsh] Is it possible to build a surface from a deformed mesh?   Jean-François Remacle
• [Gmsh] question   Jean-François Remacle
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Octavio Castillo Reyes
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Octavio Castillo Reyes
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Octavio Castillo Reyes
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Octavio Castillo Reyes
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D   Octavio Castillo Reyes
• [Gmsh] geo from msh   Octavio Castillo Reyes
• [Gmsh] Help/advice with definition of mesh size   Octavio Castillo Reyes
• [Gmsh] Help/advice with definition of mesh size   Octavio Castillo Reyes
• [Gmsh] Meshing constraint in interphase section of RVEs   Rohracker, Maurice
• [Gmsh] Periodicity at the boundary of a box   Rohracker, Maurice
• [Gmsh] Broken mesh for coarser mesh size at centre of circle   Rohracker, Maurice
• [Gmsh] 3D Mesh for Box with Inclusions   Maurice Rohracker
• [Gmsh] Comparison of different meshes   Rohracker, Maurice
• [Gmsh] forcing a single element type on a 3D mesh.   David Romero
• [Gmsh] PETSc/DMPlex and .msh   Sharan Roongta
• [Gmsh] PETSc/DMPlex and .msh   Sharan Roongta
• [Gmsh] Structured mesh for a 5-vertices polygon   Pollyana Rosa
• [Gmsh] Duplicate elements in unv file   Pollyana Rosa
• [Gmsh] How to use the plugin crack from the command line   Rosicley Júnio Rodrigues Rosa
• [Gmsh] Is it possible to build a surface from a deformed mesh?   Rosicley Júnio Rodrigues Rosa
• [Gmsh] Problem with creating a mesh in OpenCASCADE kernel   Rosicley Júnio Rodrigues Rosa
• [Gmsh] asking for help   Jose Juan Alonso del Rosario
• [Gmsh] bad orientation   Jose Juan Alonso del Rosario
• [Gmsh] bad orientation   Jose Juan Alonso del Rosario
• [Gmsh] bad orientation   Jose Juan Alonso del Rosario
• [Gmsh] Mesh two volumes conformally GMSH   Camillo Rossetto
• [Gmsh] Mesh two volumes conformally   Camillo Rossetto
• [Gmsh] What is the angle in ClassifySurfaces?   Baltasar Rüchardt
• [Gmsh] Can I turn an STL or the Created Geometry in Gmsh?   Baltasar Rüchardt
• [Gmsh] Bounding Box of an imported STL Smaller than geometry?   Baltasar Rüchardt
• [Gmsh] Bounding Box of an imported STL Smaller than geometry?   Baltasar Rüchardt
• [Gmsh] Small element size factor does not work   SAHA, SUDIPTA
• [Gmsh] Small element size factor does not work   SAHA, SUDIPTA
• [Gmsh] Small element size factor does not work   SAHA, SUDIPTA
• [Gmsh] How to avoid creating defaultFaces in gmsh to OpenFoam conversion?   SAHA, SUDIPTA
• [Gmsh] Problem of Conformal Meshing at Volume boundaries   SAHA, SUDIPTA
• [Gmsh] Generate a CFD mesh   SAHA, SUDIPTA
• [Gmsh] Step model view export as png from command line/script   SAHA, SUDIPTA
• [Gmsh] transfinite algorithm limitation for structured meshes   BRAHMACHARY SHUVAYAN
• [Gmsh] bad orientation   Ruth Vazquez Sabariego
• [Gmsh] 3d Delaunay Mesh   Juan Sanchez
• [Gmsh] 3d Delaunay Mesh   Juan Sanchez
• [Gmsh] Point In Edge - a workaround with issues   Mathias Scheunert
• [Gmsh] BooleanFragments on tiny scale   Mathias Scheunert
• [Gmsh] Error: Cannot reparametrize a mesh node in high order meshing   Mathias Scheunert
• [Gmsh] Mesh renumbering to MED format   Miguel Segade
• [Gmsh] meshing partitions   Hansjoerg Seybold
• [Gmsh] meshing partitions   Hansjoerg Seybold
• [Gmsh] meshing partitions   Hansjoerg Seybold
• [Gmsh] Problem with gmsh mesh in freefem++   Sadia Siddiqa
• [Gmsh] 3D volume as tetrahedra only   Keith Sloan
• [Gmsh] Mesh & Topshape, Brep   Keith Sloan
• [Gmsh] Meshing Looping how to debug.   Keith Sloan
• [Gmsh] Error codes.   Keith Sloan
• [Gmsh] Create gmsh 2D.   Keith Sloan
• [Gmsh] 3D Volume from 2D Mesh via python program   Keith Sloan
• [Gmsh] There was eventually a crash report   Keith Sloan
• [Gmsh] Not grasping something correctly.   Keith Sloan
• [Gmsh] Adding a boundary surface on a STL model   Dimitrios Stoupis
• [Gmsh] Adding a boundary surface on a STL model   Dimitrios Stoupis
• [Gmsh] Reduce number of digits in key-format file   Xingsheng Sun
• [Gmsh] Reduce number of digits in key-format file   Xingsheng Sun
• [Gmsh] Save all nodes but not 2D shell meshes in the physical surfaces   Xingsheng Sun
• [Gmsh] Save all nodes but not 2D shell meshes in the physical surfaces   Xingsheng Sun
• [Gmsh] Structured triangular grid   Jeremy Theler
• [Gmsh] Physical entities/groups   Jeremy Theler
• [Gmsh] Create mesh for 1D geometry   Jeremy Theler
• [Gmsh] Sphere in a sphere mesh   Jeremy Theler
• [Gmsh] R: Slice 3D to get 2D geometry   Jeremy Theler
• [Gmsh] Adding second-order nodes to tet4   Jeremy Theler
• [Gmsh] Adding second-order nodes to tet4   Jeremy Theler
• [Gmsh] Making an animation from non-uniform time steps   Jeremy Theler
• [Gmsh] Embed a point lying on the edge   Jeremy Theler
• [Gmsh] 3D non-uniform meshing   Jeremy Theler
• [Gmsh] Small element size factor does not work   Jeremy Theler
• [Gmsh] Does OCC fillet splines?   Jeremy Theler
• [Gmsh] Gaps and overlaps when using extrude command   Jeremy Theler
• [Gmsh] Gaps and overlaps when using extrude command   Jeremy Theler
• [Gmsh] Coherence 'could not find extruded vertex' error   Jeremy Theler
• [Gmsh] ?==?utf-8?q? Step model view export as png from command line/script   Jeremy Theler
• [Gmsh] ?= Step model view export as png from command line/scrip   Jeremy Theler
• [Gmsh] PETSc/DMPlex and .msh   Jeremy Theler
• [Gmsh] Adding a physical surface (on which the load will be applied) to an existing volume.   Bertrand Thierry
• [Gmsh] Strange mesh in a curved square   Bertrand Thierry
• [Gmsh] Problem of Conformal Meshing at Volume boundaries   Patrick Tsui
• [Gmsh] Negative Jacobians in 2nd Order Mesh   Nikhil Vaidya
• [Gmsh] Negative Jacobians in 2nd Order Mesh   Nikhil Vaidya
• [Gmsh] Negative Jacobians in 2nd Order Mesh   Nikhil Vaidya
• [Gmsh] Negative Jacobians in 2nd Order Mesh   Nikhil Vaidya
• [Gmsh] SolidWorks tagging elementary entities   CHARLES WRIGHT
• [Gmsh] Rectangular cutouts in cylinders   Nils Wagner
• [Gmsh] R: GRegion meshsize   Steffè Walter
• [Gmsh] R: GRegion meshsize   Steffè Walter
• [Gmsh] R: GRegion meshsize   Steffè Walter
• [Gmsh] Question about adding new solver in onelab   Cean Wang
• [Gmsh] Negative Jacobians in 2nd Order Mesh   Stephen Wornom
• [Gmsh] GMsh python API: all all point tags of volume   Tian Xia
• [Gmsh] Gmsh binary with OpenMP enabled   Tian Xia
• [Gmsh] 3D non-uniform meshing   Tian Xia
• [Gmsh] 3D non-uniform meshing   Tian Xia
• [Gmsh] Background field Threshold unexpected behavior   Tian Xia
• [Gmsh] Points not used by tetrahedrons   Tian Xia
• [Gmsh] Boundary layer field - tangential direction mesh size   Tian Xia
• [Gmsh] Boundary layer mesh: v4.7.1 conditionally crashes   Tian Xia
• [Gmsh] Questions about gmsh   Li Yang
• [Gmsh] Questions about gmsh   Li Yang
• [Gmsh] Questions about gmsh   Li Yang
• [Gmsh] Remeshing for STL   Li Yang
• [Gmsh] Shared boundaries between two stl model   Yue Yu
• [Gmsh] Strange mesh in a curved square   Sabrina Zacarias
• [Gmsh] Slice 3D to get 2D geometry   Sabrina Zacarias
• [Gmsh] Mesh error   Sabrina Zacarias
• [Gmsh] Mesh error   Sabrina Zacarias
• [Gmsh] Mesh error   Sabrina Zacarias
• [Gmsh] Surface orientation   Sabrina Zacarias
• [Gmsh] Single element normal   Sabrina Zacarias
• [Gmsh] parallel meshing?   Sabrina Zacarias
• [Gmsh] cannot change the meshing size   Zhang, Fangyin
• [Gmsh] cannot change the meshing size   Zhang, Fangyin
• [Gmsh] cannot change the meshing size   Zhang, Fangyin
• [Gmsh] Linear elasticity equation using the template project file   Zoltan
• [Gmsh] Linear elasticity equation using the template project file   Zoltan
• [Gmsh] HXT failure at the boolean demo with baffles   andrew
• [Gmsh] BUG (??) in version 4.5.6   miguel.ariza at artorg.unibe.ch
• [Gmsh] fillet producing irregular mesh   baptiste auguie
• [Gmsh] fillet producing irregular mesh   baptiste auguié
• [Gmsh] integration, spikes   t.eschner at dokom.net
• [Gmsh] integration, spikes   t.eschner at dokom.net
• [Gmsh] Hdf5 files and gmsh   paul francedixhuit
• [Gmsh] Python API (with Anaconda)   paul francedixhuit
• [Gmsh] Python API (with Anaconda)   paul francedixhuit
• [Gmsh] Questions on 4.1 format   paul francedixhuit
• [Gmsh] Questions on 4.1 format   paul francedixhuit
• [Gmsh] Python API and Spyder   paul francedixhuit
• [Gmsh] Python API and Spyder   paul francedixhuit
• [Gmsh] Python API and Spyder   paul francedixhuit
• [Gmsh] curved mesh and jacobian   françois fraysse
• [Gmsh] Rotation of Surface in Gmsh   Razon kumar
• [Gmsh] Error after Mesh Conversion to OpenFOAM   Razon kumar
• [Gmsh] High Aspect Ratio Cells   Razon kumar
• [Gmsh] Periodic Surface Error: Different number of points for periodic correspondance between surfaces.   lucia.cobian
• [Gmsh] joining arrow tips   mepl
• [Gmsh] How are set up U and V vectors for elements ?   bilou at netc.it
• [Gmsh] Small cylinder in huge domain   tao song
• [Gmsh] Small cylinder in huge domain   tao song
• [Gmsh] Small cylinder in huge domain   tao song
• [Gmsh] Generate a CFD mesh   li.hao.48z at st.kyoto-u.ac.jp
• [Gmsh] Cmake configuration problem with gmsh 4.5.1   walter steffe
• [Gmsh] Cmake configuration problem with gmsh 4.5.1   walter steffe
• [Gmsh] GRegion meshsize   walter steffe
• [Gmsh] Transforming mesh   jeremy theler
• [Gmsh] Small cylinder in huge domain   jeremy theler
• [Gmsh] Adding second-order nodes to tet4   jeremy theler
• [Gmsh] 3D non-uniform meshing   jeremy theler
• [Gmsh] 3D volume as tetrahedra only   jeremy theler
• [Gmsh] Gaps and overlaps when using extrude command   jeremy theler
• [Gmsh] Negative Jacobians in 2nd Order Mesh   jeremy theler
• [Gmsh] Line / edge / curve direction - how to change it to use Progression properly (transfinite curve)   triimaran
• [Gmsh] Physical entities/groups   cgeuzaine at uliege.be
• [Gmsh] building of gmsh on mingw64   walter
• [Gmsh] building of gmsh on mingw64   walter
• [Gmsh] Question about adding new solver in onelab   cean wang
• [Gmsh] $NodeData in msh file ver 4.1   cean wang
• [Gmsh] Question about adding new solver in onelab   cean wang
• [Gmsh] Question about adding new solver in onelab   cean wang
• [Gmsh] Question about storing two vectors in one line of a msh file   cean wang
• [Gmsh] Generate a CFD mesh   李昊
• [Gmsh] terrain meshing with an stl file   浩 杨

Last message date: Wed Dec 30 20:47:27 CET 2020
Archived on: Wed Dec 30 20:47:38 CET 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...