[Gmsh] Change position of value scale

[Marco Tiberga]

Dear Max,

Yes, that works!
The scale is vertical now, even though I cannot move it to the right/left of the view.. but it does not matter, better than nothing.

Thanks for the help, I scanned through the View options in the manual, I did not think of looking at the PostProcessing ones as well.
As a suggestion, I think that explaining what the “PostProcessing.HorizontalScales = 0” does in the manual is useful to everyone.

Best,
Marco


From: Max Orok [mailto:morok at mevex.com]
Sent: woensdag 4 december 2019 20:21
To: Marco Tiberga
Cc: gmsh at onelab.info
Subject: Re: [Gmsh] Change position of value scale

Maybe try setting PostProcessing.HorizontalScales = 0; ?

[image.png]

http://gmsh.info/doc/texinfo/gmsh.html#Post_002dprocessing-options-list<https://urldefense.proofpoint.com/v2/url?u=http-3A__gmsh.info_doc_texinfo_gmsh.html-23Post-5F002dprocessing-2Doptions-2Dlist&d=DwMFaQ&c=XYzUhXBD2cD-CornpT4QE19xOJBbRy-TBPLK0X9U2o8&r=xDQrN9dIlh8hsy24roW04-s63YICVLB4nv0g5BCLJug&m=qUtGaLYrjPCKHK3eKYmQv6iMH0TArZJR0a1__z42B84&s=_xFNXVlwRiYdTzkAs9E8_ogFRAdlhy0gKmXVISByvGk&e=>

Sincerely,
Max

On Wed, Dec 4, 2019 at 1:52 PM Marco Tiberga <M.Tiberga at tudelft.nl<mailto:M.Tiberga at tudelft.nl>> wrote:
Dear Gmsh community,

Is there a way to change the position of the value scale in any kind of View?
I tried with the most recent Gmsh snapshot, but if I go to “View options” -> “Axes” -> “2D axes/value scale position” only the option “manual” seems to actually be able to change the position. I am using the GUI, FYI.

However, I cannot obtain what I want.
The “Automatic” position is at the bottom-center of the screen and the scale is horizontal. If possible, I would like to have a vertical scale, to the left or right of the view.

Thanks a lot for your help, in advance.

Best regards,
Marco Tiberga
PhD candidate
Delft University of Technology
Faculty of Applied Sciences
Radiation Science & Technology Department
Mekelweg 15, 2629 JB Delft, The Netherlands
E-Mail: m.tiberga at tudelft.nl<mailto:m.tiberga at tudelft.nl>
Website: http://www.nera.rst.tudelft.nl/


_______________________________________________
gmsh mailing list
gmsh at onelab.info<mailto:gmsh at onelab.info>
http://onelab.info/mailman/listinfo/gmsh<https://urldefense.proofpoint.com/v2/url?u=http-3A__onelab.info_mailman_listinfo_gmsh&d=DwMFaQ&c=XYzUhXBD2cD-CornpT4QE19xOJBbRy-TBPLK0X9U2o8&r=xDQrN9dIlh8hsy24roW04-s63YICVLB4nv0g5BCLJug&m=qUtGaLYrjPCKHK3eKYmQv6iMH0TArZJR0a1__z42B84&s=vQWj1_NaXq8Ch7hU7drxqMwPffNWdeYRI7WX8ETha4E&e=>


--
Max Orok
Contractor
www.mevex.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.mevex.com&d=DwMFaQ&c=XYzUhXBD2cD-CornpT4QE19xOJBbRy-TBPLK0X9U2o8&r=xDQrN9dIlh8hsy24roW04-s63YICVLB4nv0g5BCLJug&m=qUtGaLYrjPCKHK3eKYmQv6iMH0TArZJR0a1__z42B84&s=hEpgsb8iQgb9wNvhzgjRFugwMCBaHL4jtlZd3L8WtSw&e=>

[Image removed by sender.]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20191205/71f72632/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 32473 bytes
Desc: image001.png
URL: <http://onelab.info/pipermail/gmsh/attachments/20191205/71f72632/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 426 bytes
Desc: image002.jpg
URL: <http://onelab.info/pipermail/gmsh/attachments/20191205/71f72632/attachment-0001.jpg>