[Gmsh] Change position of value scale

[Max Orok]

Maybe try setting PostProcessing.HorizontalScales = 0; ?

[image: image.png]

http://gmsh.info/doc/texinfo/gmsh.html#Post_002dprocessing-options-list

Sincerely,
Max

On Wed, Dec 4, 2019 at 1:52 PM Marco Tiberga <M.Tiberga at tudelft.nl> wrote:

> Dear Gmsh community,
>
>
>
> Is there a way to change the position of the value scale in any kind of
> View?
>
> I tried with the most recent Gmsh snapshot, but if I go to “View options”
> -> “Axes” -> “2D axes/value scale position” only the option “manual” seems
> to actually be able to change the position. I am using the GUI, FYI.
>
>
>
> However, I cannot obtain what I want.
>
> The “Automatic” position is at the bottom-center of the screen and the
> scale is horizontal. If possible, I would like to have a vertical scale, to
> the left or right of the view.
>
>
>
> Thanks a lot for your help, in advance.
>
>
>
> Best regards,
>
> Marco Tiberga
>
> PhD candidate
>
> Delft University of Technology
>
> Faculty of Applied Sciences
>
> Radiation Science & Technology Department
>
> Mekelweg 15, 2629 JB Delft, The Netherlands
>
> E-Mail: *m.tiberga at tudelft.nl <m.tiberga at tudelft.nl>*
>
> Website: http://www.nera.rst.tudelft.nl/
>
>
>
>
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh
>


-- 
Max Orok
Contractor
www.mevex.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20191204/b4165253/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 14299 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20191204/b4165253/attachment-0001.png>