[Gmsh] Trouble meshing one volume
Robin Cornelius
robin.cornelius at hirst-magnetics.com
Tue Jul 12 14:56:03 CEST 2011
Hi,
Hope someone can help with this.. I'm having trouble meshing the
attached model. One of the volume regions is failing to volume mesh
without any obvious errors on the console. Its volume 849 in the
attached geo. Hopefully someone can point out what error i have made as
I can't for the life of me find it.
Also one final question is there some way to easily create what i refer
to as an "air box" that is if I define a model then an outer boundary I
usually then have to create an air volume and set all the surfaces of
the actual model as part of the hole of that air volume. Is it possible
to create an outer airbox then just specify the inner volumes to exclude
as a hole rather than having to set all the inner surfaces as holes
which can get quite difficult and be very error prone.
Thanks in advance
--
Best regards
Robin Cornelius
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: movingpole1.geo
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20110712/67ad5af8/attachment.geo>