[Gmsh] crash when meshing 'cleaned' STEP file

Smith, Mark Mark.Smith at Linx.co.uk
Fri Apr 8 18:06:19 CEST 2011


Hi Matthias
Have you had a look at MeshLab http://meshlab.sourceforge.net/ which
might enable you to do what you want if you export in stl format first?
 
Regards
mark

________________________________

From: gmsh-bounces at ace20.montefiore.ulg.ac.be
[mailto:gmsh-bounces at ace20.montefiore.ulg.ac.be] On Behalf Of Zenker,
Dr. Matthias
Sent: 08 April 2011 14:19
To: gmsh at geuz.org
Subject: [Gmsh] crash when meshing 'cleaned' STEP file



Hi, 

I am working on a method to 'clean' STEP files in order to get a
conformal mesh between adjacent bodies. If I get it to work, I will be
happy to share it, but I am still struggling at the moment...

My problem is that gmsh will not mesh my 'cleaned' geometry. What I try
to do is to determine the surfaces and lines which are identical, delete
the unnecessary ones and redefine the volumes using the remaining
surfaces. I use an external tool (scilab script), so I did not modify
gmsh. Please find in the attachment my test geometry in STEP format and
the geo file I want to use for the 3D mesh. gmsh does the 2D and 2D
meshing without problems, but crashes during the 3D mesh (either I get a
net crash, or gmsh does not respond any more after some time, and I have
to kill it). Did I do something wrong when generating the geo file? I
would be very happy if someone could have a look on my case.

I am using gmsh 2.5.1svn under Windoze XP. 

Thank you for any hint, 

Matthias 

---------------------------------------------------------------- 
ERBE Elektromedizin GmbH 
Dr.rer.nat. Matthias Zenker 
Dipl. Phys. 
Grundlagenentwicklung / Fundamental Development 
Waldhoernlestrasse 17 
72072 Tuebingen 
Germany 
Phone + 49 (0) 7071 755 - 226 
Fax + 49 (0) 7071 755 - 5226 
E-Mail: <mailto:Matthias.Zenker at erbe-med.com
<mailto:Matthias.Zenker at erbe-med.com> > 
URL: http://www.ERBE-med.com <http://www.ERBE-med.com>  
---------------------------------------------------------------- 
<<Baugruppe1_overlap.zip>> 



Please be advised that this email may contain confidential 
information.  If you are not the intended recipient, please notify us 
by email by replying to the sender and delete this message.  The 
sender disclaims that the content of this email constitutes an offer 
to enter into, or the acceptance of, any agreement; provided that the 
foregoing does not invalidate the binding effect of any digital or 
other electronic reproduction of a manual signature that is included 
in any attachment.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20110408/d935340c/attachment.html>