[Gmsh] Meshing STL File

[jbi35 at student.canterbury.ac.nz]

Hi there,

i am currently using gmsh to create 3d volume meshes from an stl file, which describes the surface. In order to create meshes with different mesh sizes i can create finer or coarser surface meshes( stl's) The problem is that gmsh does not work for some mesh sizes
e.g it works for 0.002 and 0.0022 but not for 0.0019 or 0.0021.
Has anybody had similar problems in the past ? Or knows a remedy??

thanks for your help

cheers jonas