[Getdp] Problem with induction heat geometry

[stefan.braun at smartcae.de]

Hi Matti,
i have two additionally questions to the example.
If i change the frequence from 50 to 5000 Hz i see no real skin effect. 
Could it be possible that the mesh is not fine enough?
My second questions is, how is it possible to integrate the temperature and 
the nonlinear mu curve.
If found an example in the group 

http://www.geuz.org/pipermail/getdp/2000/000111.html
http://geuz.org/pipermail/getdp/2000/000125.html

but the attachment of the working file in 000125.html is missing.

Thank you very much for your help.
Best regards,
Stefan Braun







On Tuesday, January 29, 2013 11:53:49 PM UTC+1, stefan... at smartcae.de wrote:
>
> Hi Matti,
> thank you for your help. Now it works.
> Best regards,
> Stefan Braun
>
> SmartCAE, Munich
>
> On Tuesday, January 29, 2013 5:03:18 PM UTC+1, Matti Pellikka wrote:
>>
>> Hi, 
>>
>> I was able to reproduce the issue with the latest nightly build on 64 
>> bit Windows 7. I'm investigating the issue, but as a temporary fix, 
>> running the mesher from Windows Command Prompt seems to work. 
>>
>> Open the Windows Command Prompt and go to the directory where both 
>> gmsh.exe and indheat.geo are. Run the command: 
>>
>> gmsh indheat.geo -3 
>>
>> This creates the mesh file indheat.msh, which you can examine normally 
>> using the graphical interface of Gmsh. To solve the induction heating 
>> problem, have getdp.exe, indheat.pro and indheat.msh in the same 
>> directory and in that directory run in the Command Prompt the command 
>>
>> getdp indheat.pro -solve MagDynTOComplex -pos MagDynTO 
>>
>> You can examine the resulting .pos files using the graphical interface of 
>> Gmsh. 
>>
>> Best regards, 
>>
>> -- 
>> Matti Pellikka, Researcher 
>> Tampere University of Technology, Electromagnetics 
>>
>>
>> On 29 January 2013 13:12,  <stefan... at smartcae.de> wrote: 
>> > Hello Matti, 
>> > thank you very much for your help. 
>> > I tried the new build 2.6.2 gmesh and the bulid of getdp 2.2.2 and i 
>> come 
>> > little bit further. 
>> > I have no error messages and the mesher starts. 
>> > When the mesher reaches reducing cell complex the mesher crashes. 
>> > Do you have any idea how to solve this problem, 
>> > Thank you very much, 
>> > 
>> > Best regards, 
>> > Stefan Braun 
>> > 
>> > SmartCAE, Munich 
>> > 
>> > On Monday, January 28, 2013 10:02:52 AM UTC+1, Matti Pellikka wrote: 
>> >> 
>> >> Hi Stefan, 
>> >> 
>> >> The cohomology computation commands on those lines didn't make it to 
>> >> the current release version 2.6.1 of Gmsh. However, those commands 
>> >> should be available in tomorrow's nightly builds of the development 
>> >> version. 
>> >> 
>> >> Alternatively, you can compile the current development version by 
>> >> yourself, check that the build option ENABLE_KBIPACK is ON to enable 
>> >> the cohomology computation. 
>> >> 
>> >> I suspect that you also need the latest development version of GetDP 
>> >> to compute the example. 
>> >> 
>> >> -- 
>> >> Matti Pellikka, Researcher 
>> >> Tampere University of Technology, Electromagnetics 
>> >> 
>> >> On 27 January 2013 00:57,  <stefan... at smartcae.de> wrote: 
>> >> > Hello Group Members, 
>> >> > i want to try out a example of onelab.info about induction heating. 
>> >> > 
>> >> > If i import the *.geo file in gmsh i get the following error 
>> messages. 
>> >> > 
>> >> > 
>> http://onelab.info/files/getdp/Magnetodynamics/GMSH_GETDP/indheat.geo 
>> >> > 
>> >> > 
>> >> > Info    : Reading 'C:\...\indheat.geo'... 
>> >> > Info    : Starting subloop 1 in Line Loop 543 (are you sure about 
>> this?) 
>> >> > Error   : 'C:\...\indheat.geo', line 176 : syntax error (() 
>> >> > Error   : 'C:\...\indheat.geo', line 177 : syntax error (() 
>> >> > Error   : 'C:\...\indheat.geo', line 186 : syntax error (() 
>> >> > Error   : 'C:\...\ndheat.geo', line 187 : syntax error (() 
>> >> > 
>> >> > 
>> >> > 
>> >> > Thank you very much help on this problem. 
>> >> > Best regards, 
>> >> > Stefan Braun 
>> >> > 
>> >> > SmartCAE, Munich 
>> >> > 
>> >> > _______________________________________________ 
>> >> > getdp mailing list 
>> >> > ge... at geuz.org 
>> >> > http://www.geuz.org/mailman/listinfo/getdp 
>> >> > 
>> >> 
>> >> _______________________________________________ 
>> >> getdp mailing list 
>> >> ge... at geuz.org 
>> >> http://www.geuz.org/mailman/listinfo/getdp 
>>
>> _______________________________________________ 
>> getdp mailing list 
>> ge... at geuz.org 
>> http://www.geuz.org/mailman/listinfo/getdp 
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/getdp/attachments/20130202/2850da93/attachment-0001.html>