[Getdp] Problem with induction heat geometry
stefan.braun at smartcae.de
stefan.braun at smartcae.de
Tue Jan 29 23:53:49 CET 2013
Hi Matti,
thank you for your help. Now it works.
Best regards,
Stefan Braun
SmartCAE, Munich
On Tuesday, January 29, 2013 5:03:18 PM UTC+1, Matti Pellikka wrote:
>
> Hi,
>
> I was able to reproduce the issue with the latest nightly build on 64
> bit Windows 7. I'm investigating the issue, but as a temporary fix,
> running the mesher from Windows Command Prompt seems to work.
>
> Open the Windows Command Prompt and go to the directory where both
> gmsh.exe and indheat.geo are. Run the command:
>
> gmsh indheat.geo -3
>
> This creates the mesh file indheat.msh, which you can examine normally
> using the graphical interface of Gmsh. To solve the induction heating
> problem, have getdp.exe, indheat.pro and indheat.msh in the same
> directory and in that directory run in the Command Prompt the command
>
> getdp indheat.pro -solve MagDynTOComplex -pos MagDynTO
>
> You can examine the resulting .pos files using the graphical interface of
> Gmsh.
>
> Best regards,
>
> --
> Matti Pellikka, Researcher
> Tampere University of Technology, Electromagnetics
>
>
> On 29 January 2013 13:12, <stefan... at smartcae.de <javascript:>> wrote:
> > Hello Matti,
> > thank you very much for your help.
> > I tried the new build 2.6.2 gmesh and the bulid of getdp 2.2.2 and i
> come
> > little bit further.
> > I have no error messages and the mesher starts.
> > When the mesher reaches reducing cell complex the mesher crashes.
> > Do you have any idea how to solve this problem,
> > Thank you very much,
> >
> > Best regards,
> > Stefan Braun
> >
> > SmartCAE, Munich
> >
> > On Monday, January 28, 2013 10:02:52 AM UTC+1, Matti Pellikka wrote:
> >>
> >> Hi Stefan,
> >>
> >> The cohomology computation commands on those lines didn't make it to
> >> the current release version 2.6.1 of Gmsh. However, those commands
> >> should be available in tomorrow's nightly builds of the development
> >> version.
> >>
> >> Alternatively, you can compile the current development version by
> >> yourself, check that the build option ENABLE_KBIPACK is ON to enable
> >> the cohomology computation.
> >>
> >> I suspect that you also need the latest development version of GetDP
> >> to compute the example.
> >>
> >> --
> >> Matti Pellikka, Researcher
> >> Tampere University of Technology, Electromagnetics
> >>
> >> On 27 January 2013 00:57, <stefan... at smartcae.de> wrote:
> >> > Hello Group Members,
> >> > i want to try out a example of onelab.info about induction heating.
> >> >
> >> > If i import the *.geo file in gmsh i get the following error
> messages.
> >> >
> >> > http://onelab.info/files/getdp/Magnetodynamics/GMSH_GETDP/indheat.geo
> >> >
> >> >
> >> > Info : Reading 'C:\...\indheat.geo'...
> >> > Info : Starting subloop 1 in Line Loop 543 (are you sure about
> this?)
> >> > Error : 'C:\...\indheat.geo', line 176 : syntax error (()
> >> > Error : 'C:\...\indheat.geo', line 177 : syntax error (()
> >> > Error : 'C:\...\indheat.geo', line 186 : syntax error (()
> >> > Error : 'C:\...\ndheat.geo', line 187 : syntax error (()
> >> >
> >> >
> >> >
> >> > Thank you very much help on this problem.
> >> > Best regards,
> >> > Stefan Braun
> >> >
> >> > SmartCAE, Munich
> >> >
> >> > _______________________________________________
> >> > getdp mailing list
> >> > ge... at geuz.org
> >> > http://www.geuz.org/mailman/listinfo/getdp
> >> >
> >>
> >> _______________________________________________
> >> getdp mailing list
> >> ge... at geuz.org
> >> http://www.geuz.org/mailman/listinfo/getdp
>
> _______________________________________________
> getdp mailing list
> ge... at geuz.org <javascript:>
> http://www.geuz.org/mailman/listinfo/getdp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/getdp/attachments/20130129/62bb77d7/attachment-0001.html>