// Sublayer at  z = 0 //


//Fascicle 1//


//Endoneurium Points//


Point(1) = {00.4308, 01.2189, 00.0000, 00.0313};
Point(2) = {00.5105, 01.2216, 00.0000, 00.0313};
Point(3) = {00.5478, 01.1898, 00.0000, 00.0313};
Point(4) = {00.6195, 01.2189, 00.0000, 00.0313};
Point(5) = {00.7020, 01.2163, 00.0000, 00.0313};
Point(6) = {00.7073, 01.1528, 00.0000, 00.0313};
Point(7) = {00.7419, 01.1079, 00.0000, 00.0313};
Point(8) = {00.6887, 01.0576, 00.0000, 00.0313};
Point(9) = {00.6780, 01.0074, 00.0000, 00.0313};
Point(10) = {00.6913, 00.9624, 00.0000, 00.0313};
Point(11) = {00.7020, 00.9016, 00.0000, 00.0313};
Point(12) = {00.7099, 00.8382, 00.0000, 00.0313};
Point(13) = {00.6727, 00.7826, 00.0000, 00.0313};
Point(14) = {00.6328, 00.7853, 00.0000, 00.0313};
Point(15) = {00.6461, 00.7086, 00.0000, 00.0313};
Point(16) = {00.6887, 00.6478, 00.0000, 00.0313};
Point(17) = {00.6807, 00.6081, 00.0000, 00.0313};
Point(18) = {00.6435, 00.5896, 00.0000, 00.0313};
Point(19) = {00.5664, 00.5685, 00.0000, 00.0313};
Point(20) = {00.4627, 00.5976, 00.0000, 00.0313};
Point(21) = {00.4068, 00.6081, 00.0000, 00.0313};
Point(22) = {00.3483, 00.6028, 00.0000, 00.0313};
Point(23) = {00.3058, 00.5843, 00.0000, 00.0313};
Point(24) = {00.2207, 00.6108, 00.0000, 00.0313};
Point(25) = {00.1835, 00.6504, 00.0000, 00.0313};
Point(26) = {00.1329, 00.7139, 00.0000, 00.0313};
Point(27) = {00.1250, 00.7932, 00.0000, 00.0313};
Point(28) = {00.1329, 00.8487, 00.0000, 00.0313};
Point(29) = {00.1569, 00.8990, 00.0000, 00.0313};
Point(30) = {00.1888, 00.9624, 00.0000, 00.0313};
Point(31) = {00.2260, 01.0259, 00.0000, 00.0313};
Point(32) = {00.2526, 01.0761, 00.0000, 00.0313};
Point(33) = {00.2951, 01.1581, 00.0000, 00.0313};
Point(34) = {00.3510, 01.2031, 00.0000, 00.0313};
CatmullRom(1) = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 1};
Line Loop(2) = {1};
Plane Surface(3) = {2};


//Perineurium Points//


Point(35) = {00.4306, 01.2439, 00.0000, 00.0313};
Point(36) = {00.5163, 01.2459, 00.0000, 00.0313};
Point(37) = {00.5568, 01.2131, 00.0000, 00.0313};
Point(38) = {00.6320, 01.2406, 00.0000, 00.0313};
Point(39) = {00.7180, 01.2355, 00.0000, 00.0313};
Point(40) = {00.7255, 01.1700, 00.0000, 00.0313};
Point(41) = {00.7624, 01.1221, 00.0000, 00.0313};
Point(42) = {00.7198, 01.0711, 00.0000, 00.0313};
Point(43) = {00.7008, 01.0178, 00.0000, 00.0313};
Point(44) = {00.7155, 00.9688, 00.0000, 00.0313};
Point(45) = {00.7270, 00.9022, 00.0000, 00.0313};
Point(46) = {00.7344, 00.8331, 00.0000, 00.0313};
Point(47) = {00.6954, 00.7720, 00.0000, 00.0313};
Point(48) = {00.6547, 00.7632, 00.0000, 00.0313};
Point(49) = {00.6749, 00.6921, 00.0000, 00.0313};
Point(50) = {00.7066, 00.6304, 00.0000, 00.0313};
Point(51) = {00.6970, 00.5892, 00.0000, 00.0313};
Point(52) = {00.6576, 00.5690, 00.0000, 00.0313};
Point(53) = {00.5758, 00.5453, 00.0000, 00.0313};
Point(54) = {00.4651, 00.5727, 00.0000, 00.0313};
Point(55) = {00.4045, 00.5832, 00.0000, 00.0313};
Point(56) = {00.3413, 00.5788, 00.0000, 00.0313};
Point(57) = {00.2963, 00.5612, 00.0000, 00.0313};
Point(58) = {00.2057, 00.5908, 00.0000, 00.0313};
Point(59) = {00.1656, 00.6330, 00.0000, 00.0313};
Point(60) = {00.1115, 00.7010, 00.0000, 00.0313};
Point(61) = {00.1012, 00.7854, 00.0000, 00.0313};
Point(62) = {00.1082, 00.8449, 00.0000, 00.0313};
Point(63) = {00.1319, 00.8993, 00.0000, 00.0313};
Point(64) = {00.1647, 00.9691, 00.0000, 00.0313};
Point(65) = {00.2049, 01.0392, 00.0000, 00.0313};
Point(66) = {00.2349, 01.0938, 00.0000, 00.0313};
Point(67) = {00.2835, 01.1802, 00.0000, 00.0313};
Point(68) = {00.3445, 01.2272, 00.0000, 00.0313};
CatmullRom(4) = {35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 35};
Line Loop(5) = {4};
Plane Surface(6) = {5, 2};


//Fascicle 2//


//Endoneurium Points//


Point(69) = {00.8136, 00.8540, 00.0000, 00.0313};
Point(70) = {00.8881, 00.8487, 00.0000, 00.0313};
Point(71) = {00.9360, 00.8117, 00.0000, 00.0313};
Point(72) = {00.9519, 00.7588, 00.0000, 00.0313};
Point(73) = {00.9865, 00.6927, 00.0000, 00.0313};
Point(74) = {00.9918, 00.6346, 00.0000, 00.0313};
Point(75) = {00.9732, 00.5579, 00.0000, 00.0313};
Point(76) = {00.9120, 00.5420, 00.0000, 00.0313};
Point(77) = {00.8429, 00.5843, 00.0000, 00.0313};
Point(78) = {00.8323, 00.6452, 00.0000, 00.0313};
Point(79) = {00.7738, 00.6875, 00.0000, 00.0313};
Point(80) = {00.7365, 00.7377, 00.0000, 00.0313};
Point(81) = {00.7525, 00.8117, 00.0000, 00.0313};
CatmullRom(7) = {69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 69};
Line Loop(8) = {7};
Plane Surface(9) = {8};


//Perineurium Points//


Point(82) = {00.8059, 00.8778, 00.0000, 00.0313};
Point(83) = {00.8920, 00.8734, 00.0000, 00.0313};
Point(84) = {00.9493, 00.8329, 00.0000, 00.0313};
Point(85) = {00.9725, 00.7731, 00.0000, 00.0313};
Point(86) = {01.0115, 00.6917, 00.0000, 00.0313};
Point(87) = {01.0142, 00.6234, 00.0000, 00.0313};
Point(88) = {00.9885, 00.5382, 00.0000, 00.0313};
Point(89) = {00.9194, 00.5181, 00.0000, 00.0313};
Point(90) = {00.8383, 00.5598, 00.0000, 00.0313};
Point(91) = {00.8193, 00.6237, 00.0000, 00.0313};
Point(92) = {00.7489, 00.6846, 00.0000, 00.0313};
Point(93) = {00.7127, 00.7451, 00.0000, 00.0313};
Point(94) = {00.7450, 00.8296, 00.0000, 00.0313};
CatmullRom(10) = {82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 82};
Line Loop(11) = {10};
Plane Surface(12) = {11, 8};


//Fascicle 3//


//Endoneurium Points//


Point(95) = {00.7445, 00.5077, 00.0000, 00.0313};
Point(96) = {00.7897, 00.4997, 00.0000, 00.0313};
Point(97) = {00.8296, 00.4468, 00.0000, 00.0313};
Point(98) = {00.8668, 00.3913, 00.0000, 00.0313};
Point(99) = {00.8854, 00.3517, 00.0000, 00.0313};
Point(100) = {00.8908, 00.2988, 00.0000, 00.0313};
Point(101) = {00.8721, 00.2433, 00.0000, 00.0313};
Point(102) = {00.8323, 00.1983, 00.0000, 00.0313};
Point(103) = {00.7605, 00.1745, 00.0000, 00.0313};
Point(104) = {00.6993, 00.1560, 00.0000, 00.0313};
Point(105) = {00.6009, 00.1401, 00.0000, 00.0313};
Point(106) = {00.5291, 00.1560, 00.0000, 00.0313};
Point(107) = {00.4786, 00.2062, 00.0000, 00.0313};
Point(108) = {00.4813, 00.2565, 00.0000, 00.0313};
Point(109) = {00.4813, 00.3358, 00.0000, 00.0313};
Point(110) = {00.5371, 00.3755, 00.0000, 00.0313};
Point(111) = {00.6222, 00.3728, 00.0000, 00.0313};
Point(112) = {00.6621, 00.3940, 00.0000, 00.0313};
Point(113) = {00.6860, 00.4733, 00.0000, 00.0313};
CatmullRom(13) = {95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 95};
Line Loop(14) = {13};
Plane Surface(15) = {14};


//Perineurium Points//


Point(114) = {00.7523, 00.5314, 00.0000, 00.0313};
Point(115) = {00.8025, 00.5212, 00.0000, 00.0313};
Point(116) = {00.8487, 00.4630, 00.0000, 00.0313};
Point(117) = {00.8903, 00.4000, 00.0000, 00.0313};
Point(118) = {00.9102, 00.3551, 00.0000, 00.0313};
Point(119) = {00.9156, 00.2958, 00.0000, 00.0313};
Point(120) = {00.8951, 00.2334, 00.0000, 00.0313};
Point(121) = {00.8513, 00.1821, 00.0000, 00.0313};
Point(122) = {00.7718, 00.1522, 00.0000, 00.0313};
Point(123) = {00.7015, 00.1311, 00.0000, 00.0313};
Point(124) = {00.5906, 00.1174, 00.0000, 00.0313};
Point(125) = {00.5121, 00.1377, 00.0000, 00.0313};
Point(126) = {00.4569, 00.1938, 00.0000, 00.0313};
Point(127) = {00.4575, 00.2486, 00.0000, 00.0313};
Point(128) = {00.4563, 00.3373, 00.0000, 00.0313};
Point(129) = {00.5135, 00.3837, 00.0000, 00.0313};
Point(130) = {00.6025, 00.3882, 00.0000, 00.0313};
Point(131) = {00.6544, 00.4178, 00.0000, 00.0313};
Point(132) = {00.6862, 00.4983, 00.0000, 00.0313};
CatmullRom(16) = {114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 114};
Line Loop(17) = {16};
Plane Surface(18) = {17, 14};


//Epineurium Points//


Point(133) = {00.1409, 01.0074, 00.0000, 00.0313};
Point(134) = {00.1861, 01.0867, 00.0000, 00.0313};
Point(135) = {00.2260, 01.1581, 00.0000, 00.0313};
Point(136) = {00.2712, 01.2321, 00.0000, 00.0313};
Point(137) = {00.3723, 01.2506, 00.0000, 00.0313};
Point(138) = {00.4866, 01.2877, 00.0000, 00.0313};
Point(139) = {00.5850, 01.2824, 00.0000, 00.0313};
Point(140) = {00.6621, 01.2903, 00.0000, 00.0313};
Point(141) = {00.7498, 01.2295, 00.0000, 00.0313};
Point(142) = {00.8004, 01.1475, 00.0000, 00.0313};
Point(143) = {00.8057, 01.0788, 00.0000, 00.0313};
Point(144) = {00.8535, 01.0312, 00.0000, 00.0313};
Point(145) = {00.9306, 00.9677, 00.0000, 00.0313};
Point(146) = {00.9865, 00.9096, 00.0000, 00.0313};
Point(147) = {01.0131, 00.8117, 00.0000, 00.0313};
Point(148) = {01.0370, 00.7139, 00.0000, 00.0313};
Point(149) = {01.0397, 00.6081, 00.0000, 00.0313};
Point(150) = {01.0104, 00.5262, 00.0000, 00.0313};
Point(151) = {01.0264, 00.4574, 00.0000, 00.0313};
Point(152) = {01.0104, 00.3860, 00.0000, 00.0313};
Point(153) = {00.9812, 00.3146, 00.0000, 00.0313};
Point(154) = {00.9652, 00.2433, 00.0000, 00.0313};
Point(155) = {00.9147, 00.1824, 00.0000, 00.0313};
Point(156) = {00.8429, 00.1058, 00.0000, 00.0313};
Point(157) = {00.7605, 00.0555, 00.0000, 00.0313};
Point(158) = {00.6541, 00.0317, 00.0000, 00.0313};
Point(159) = {00.5158, 00.0635, 00.0000, 00.0313};
Point(160) = {00.4414, 00.1111, 00.0000, 00.0313};
Point(161) = {00.4095, 00.1666, 00.0000, 00.0313};
Point(162) = {00.3776, 00.2274, 00.0000, 00.0313};
Point(163) = {00.3350, 00.3067, 00.0000, 00.0313};
Point(164) = {00.3271, 00.3834, 00.0000, 00.0313};
Point(165) = {00.3005, 00.4627, 00.0000, 00.0313};
Point(166) = {00.2154, 00.5130, 00.0000, 00.0313};
Point(167) = {00.1303, 00.6319, 00.0000, 00.0313};
Point(168) = {00.0957, 00.7245, 00.0000, 00.0313};
Point(169) = {00.0877, 00.8408, 00.0000, 00.0313};
Point(170) = {00.1037, 00.9334, 00.0000, 00.0313};
CatmullRom(19) = {133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 133};
Line Loop(20) = {19};
Plane Surface(21) = {20, 5, 11, 17};

//Encapsulation Tissue Points//


Point(171) = {00.1100, 01.0327, 00.0000, 00.0313};
Point(172) = {00.1596, 01.1166, 00.0000, 00.0313};
Point(173) = {00.2035, 01.1912, 00.0000, 00.0313};
Point(174) = {00.2530, 01.2677, 00.0000, 00.0313};
Point(175) = {00.3599, 01.2887, 00.0000, 00.0313};
Point(176) = {00.4817, 01.3274, 00.0000, 00.0313};
Point(177) = {00.5863, 01.3224, 00.0000, 00.0313};
Point(178) = {00.6683, 01.3298, 00.0000, 00.0313};
Point(179) = {00.7623, 01.2675, 00.0000, 00.0313};
Point(180) = {00.8179, 01.1835, 00.0000, 00.0313};
Point(181) = {00.8257, 01.1134, 00.0000, 00.0313};
Point(182) = {00.8782, 01.0627, 00.0000, 00.0313};
Point(183) = {00.9613, 00.9934, 00.0000, 00.0313};
Point(184) = {01.0210, 00.9298, 00.0000, 00.0313};
Point(185) = {01.0510, 00.8244, 00.0000, 00.0313};
Point(186) = {01.0768, 00.7183, 00.0000, 00.0313};
Point(187) = {01.0794, 00.6037, 00.0000, 00.0313};
Point(188) = {01.0487, 00.5146, 00.0000, 00.0313};
Point(189) = {01.0630, 00.4413, 00.0000, 00.0313};
Point(190) = {01.0445, 00.3651, 00.0000, 00.0313};
Point(191) = {01.0119, 00.2891, 00.0000, 00.0313};
Point(192) = {00.9929, 00.2144, 00.0000, 00.0313};
Point(193) = {00.9383, 00.1502, 00.0000, 00.0313};
Point(194) = {00.8609, 00.0700, 00.0000, 00.0313};
Point(195) = {00.7728, 00.0175, 00.0000, 00.0313};
Point(196) = {00.6598, -00.0079, 00.0000, 00.0313};
Point(197) = {00.5126, 00.0236, 00.0000, 00.0313};
Point(198) = {00.4327, 00.0720, 00.0000, 00.0313};
Point(199) = {00.3976, 00.1284, 00.0000, 00.0313};
Point(200) = {00.3618, 00.1906, 00.0000, 00.0313};
Point(201) = {00.3133, 00.2731, 00.0000, 00.0313};
Point(202) = {00.3011, 00.3529, 00.0000, 00.0313};
Point(203) = {00.2685, 00.4386, 00.0000, 00.0313};
Point(204) = {00.1786, 00.4973, 00.0000, 00.0313};
Point(205) = {00.0904, 00.6293, 00.0000, 00.0313};
Point(206) = {00.0561, 00.7299, 00.0000, 00.0313};
Point(207) = {00.0503, 00.8550, 00.0000, 00.0313};
Point(208) = {00.0693, 00.9537, 00.0000, 00.0313};
CatmullRom(22) = {171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 171};
Line Loop(23) = {22};
Plane Surface(24) = {23, 20};


//Cuff Points//


Point(209) = {00.5690, 01.3557, 00.0000, 00.0313};
Point(210) = {00.6130, 01.3543, 00.0000, 00.0313};
Point(211) = {00.6568, 01.3502, 00.0000, 00.0313};
Point(212) = {00.7002, 01.3433, 00.0000, 00.0313};
Point(213) = {00.7431, 01.3337, 00.0000, 00.0313};
Point(214) = {00.7853, 01.3215, 00.0000, 00.0313};
Point(215) = {00.8267, 01.3066, 00.0000, 00.0313};
Point(216) = {00.8671, 01.2891, 00.0000, 00.0313};
Point(217) = {00.9063, 01.2691, 00.0000, 00.0313};
Point(218) = {00.9441, 01.2468, 00.0000, 00.0313};
Point(219) = {00.9805, 01.2220, 00.0000, 00.0313};
Point(220) = {01.0152, 01.1951, 00.0000, 00.0313};
Point(221) = {01.0482, 01.1660, 00.0000, 00.0313};
Point(222) = {01.0793, 01.1349, 00.0000, 00.0313};
Point(223) = {01.1084, 01.1019, 00.0000, 00.0313};
Point(224) = {01.1353, 01.0672, 00.0000, 00.0313};
Point(225) = {01.1601, 01.0308, 00.0000, 00.0313};
Point(226) = {01.1824, 00.9930, 00.0000, 00.0313};
Point(227) = {01.2024, 00.9538, 00.0000, 00.0313};
Point(228) = {01.2199, 00.9134, 00.0000, 00.0313};
Point(229) = {01.2348, 00.8720, 00.0000, 00.0313};
Point(230) = {01.2470, 00.8298, 00.0000, 00.0313};
Point(231) = {01.2566, 00.7869, 00.0000, 00.0313};
Point(232) = {01.2635, 00.7435, 00.0000, 00.0313};
Point(233) = {01.2676, 00.6997, 00.0000, 00.0313};
Point(234) = {01.2690, 00.6557, 00.0000, 00.0313};
Point(235) = {01.2676, 00.6118, 00.0000, 00.0313};
Point(236) = {01.2635, 00.5680, 00.0000, 00.0313};
Point(237) = {01.2566, 00.5246, 00.0000, 00.0313};
Point(238) = {01.2470, 00.4816, 00.0000, 00.0313};
Point(239) = {01.2348, 00.4394, 00.0000, 00.0313};
Point(240) = {01.2199, 00.3980, 00.0000, 00.0313};
Point(241) = {01.2024, 00.3577, 00.0000, 00.0313};
Point(242) = {01.1824, 00.3185, 00.0000, 00.0313};
Point(243) = {01.1601, 00.2807, 00.0000, 00.0313};
Point(244) = {01.1353, 00.2443, 00.0000, 00.0313};
Point(245) = {01.1084, 00.2095, 00.0000, 00.0313};
Point(246) = {01.0793, 00.1765, 00.0000, 00.0313};
Point(247) = {01.0482, 00.1455, 00.0000, 00.0313};
Point(248) = {01.0152, 00.1164, 00.0000, 00.0313};
Point(249) = {00.9805, 00.0894, 00.0000, 00.0313};
Point(250) = {00.9441, 00.0647, 00.0000, 00.0313};
Point(251) = {00.9063, 00.0423, 00.0000, 00.0313};
Point(252) = {00.8671, 00.0224, 00.0000, 00.0313};
Point(253) = {00.8267, 00.0049, 00.0000, 00.0313};
Point(254) = {00.7853, -00.0100, 00.0000, 00.0313};
Point(255) = {00.7431, -00.0223, 00.0000, 00.0313};
Point(256) = {00.7002, -00.0319, 00.0000, 00.0313};
Point(257) = {00.6568, -00.0388, 00.0000, 00.0313};
Point(258) = {00.6130, -00.0429, 00.0000, 00.0313};
Point(259) = {00.5690, -00.0443, 00.0000, 00.0313};
Point(260) = {00.5251, -00.0429, 00.0000, 00.0313};
Point(261) = {00.4813, -00.0388, 00.0000, 00.0313};
Point(262) = {00.4379, -00.0319, 00.0000, 00.0313};
Point(263) = {00.3949, -00.0223, 00.0000, 00.0313};
Point(264) = {00.3527, -00.0100, 00.0000, 00.0313};
Point(265) = {00.3113, 00.0049, 00.0000, 00.0313};
Point(266) = {00.2710, 00.0224, 00.0000, 00.0313};
Point(267) = {00.2318, 00.0423, 00.0000, 00.0313};
Point(268) = {00.1939, 00.0647, 00.0000, 00.0313};
Point(269) = {00.1576, 00.0894, 00.0000, 00.0313};
Point(270) = {00.1228, 00.1164, 00.0000, 00.0313};
Point(271) = {00.0898, 00.1455, 00.0000, 00.0313};
Point(272) = {00.0587, 00.1765, 00.0000, 00.0313};
Point(273) = {00.0297, 00.2095, 00.0000, 00.0313};
Point(274) = {00.0027, 00.2443, 00.0000, 00.0313};
Point(275) = {-00.0220, 00.2807, 00.0000, 00.0313};
Point(276) = {-00.0444, 00.3185, 00.0000, 00.0313};
Point(277) = {-00.0644, 00.3577, 00.0000, 00.0313};
Point(278) = {-00.0818, 00.3980, 00.0000, 00.0313};
Point(279) = {-00.0967, 00.4394, 00.0000, 00.0313};
Point(280) = {-00.1090, 00.4816, 00.0000, 00.0313};
Point(281) = {-00.1186, 00.5246, 00.0000, 00.0313};
Point(282) = {-00.1255, 00.5680, 00.0000, 00.0313};
Point(283) = {-00.1296, 00.6118, 00.0000, 00.0313};
Point(284) = {-00.1310, 00.6557, 00.0000, 00.0313};
Point(285) = {-00.1296, 00.6997, 00.0000, 00.0313};
Point(286) = {-00.1255, 00.7435, 00.0000, 00.0313};
Point(287) = {-00.1186, 00.7869, 00.0000, 00.0313};
Point(288) = {-00.1090, 00.8298, 00.0000, 00.0313};
Point(289) = {-00.0967, 00.8720, 00.0000, 00.0313};
Point(290) = {-00.0818, 00.9134, 00.0000, 00.0313};
Point(291) = {-00.0644, 00.9538, 00.0000, 00.0313};
Point(292) = {-00.0444, 00.9930, 00.0000, 00.0313};
Point(293) = {-00.0220, 01.0308, 00.0000, 00.0313};
Point(294) = {00.0027, 01.0672, 00.0000, 00.0313};
Point(295) = {00.0297, 01.1019, 00.0000, 00.0313};
Point(296) = {00.0587, 01.1349, 00.0000, 00.0313};
Point(297) = {00.0898, 01.1660, 00.0000, 00.0313};
Point(298) = {00.1228, 01.1951, 00.0000, 00.0313};
Point(299) = {00.1576, 01.2220, 00.0000, 00.0313};
Point(300) = {00.1939, 01.2468, 00.0000, 00.0313};
Point(301) = {00.2318, 01.2691, 00.0000, 00.0313};
Point(302) = {00.2710, 01.2891, 00.0000, 00.0313};
Point(303) = {00.3113, 01.3066, 00.0000, 00.0313};
Point(304) = {00.3527, 01.3215, 00.0000, 00.0313};
Point(305) = {00.3949, 01.3337, 00.0000, 00.0313};
Point(306) = {00.4379, 01.3433, 00.0000, 00.0313};
Point(307) = {00.4813, 01.3502, 00.0000, 00.0313};
Point(308) = {00.5251, 01.3543, 00.0000, 00.0313};
Point(309) = {00.5690, 01.3557, 00.0000, 00.0313};
CatmullRom(25) = {209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256, 257, 258, 259, 260, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, 285, 286, 287, 288, 289, 290, 291, 292, 293, 294, 295, 296, 297, 298, 299, 300, 301, 302, 303, 304, 305, 306, 307, 308, 309, 209};
Line Loop(26) = {25};
Plane Surface(27) = {26, 23};


Point(310) = {00.5690, 01.3757, 00.0000, 00.0313};
Point(311) = {00.6142, 01.3743, 00.0000, 00.0313};
Point(312) = {00.6593, 01.3701, 00.0000, 00.0313};
Point(313) = {00.7039, 01.3630, 00.0000, 00.0313};
Point(314) = {00.7481, 01.3531, 00.0000, 00.0313};
Point(315) = {00.7915, 01.3405, 00.0000, 00.0313};
Point(316) = {00.8341, 01.3252, 00.0000, 00.0313};
Point(317) = {00.8756, 01.3072, 00.0000, 00.0313};
Point(318) = {00.9159, 01.2867, 00.0000, 00.0313};
Point(319) = {00.9548, 01.2636, 00.0000, 00.0313};
Point(320) = {00.9922, 01.2382, 00.0000, 00.0313};
Point(321) = {01.0280, 01.2105, 00.0000, 00.0313};
Point(322) = {01.0619, 01.1806, 00.0000, 00.0313};
Point(323) = {01.0939, 01.1486, 00.0000, 00.0313};
Point(324) = {01.1238, 01.1147, 00.0000, 00.0313};
Point(325) = {01.1515, 01.0789, 00.0000, 00.0313};
Point(326) = {01.1769, 01.0415, 00.0000, 00.0313};
Point(327) = {01.2000, 01.0026, 00.0000, 00.0313};
Point(328) = {01.2205, 00.9623, 00.0000, 00.0313};
Point(329) = {01.2385, 00.9208, 00.0000, 00.0313};
Point(330) = {01.2538, 00.8782, 00.0000, 00.0313};
Point(331) = {01.2664, 00.8348, 00.0000, 00.0313};
Point(332) = {01.2763, 00.7906, 00.0000, 00.0313};
Point(333) = {01.2833, 00.7460, 00.0000, 00.0313};
Point(334) = {01.2876, 00.7009, 00.0000, 00.0313};
Point(335) = {01.2890, 00.6557, 00.0000, 00.0313};
Point(336) = {01.2876, 00.6105, 00.0000, 00.0313};
Point(337) = {01.2833, 00.5655, 00.0000, 00.0313};
Point(338) = {01.2763, 00.5208, 00.0000, 00.0313};
Point(339) = {01.2664, 00.4767, 00.0000, 00.0313};
Point(340) = {01.2538, 00.4332, 00.0000, 00.0313};
Point(341) = {01.2385, 00.3907, 00.0000, 00.0313};
Point(342) = {01.2205, 00.3492, 00.0000, 00.0313};
Point(343) = {01.2000, 00.3089, 00.0000, 00.0313};
Point(344) = {01.1769, 00.2699, 00.0000, 00.0313};
Point(345) = {01.1515, 00.2325, 00.0000, 00.0313};
Point(346) = {01.1238, 00.1968, 00.0000, 00.0313};
Point(347) = {01.0939, 00.1629, 00.0000, 00.0313};
Point(348) = {01.0619, 00.1309, 00.0000, 00.0313};
Point(349) = {01.0280, 00.1010, 00.0000, 00.0313};
Point(350) = {00.9922, 00.0732, 00.0000, 00.0313};
Point(351) = {00.9548, 00.0478, 00.0000, 00.0313};
Point(352) = {00.9159, 00.0248, 00.0000, 00.0313};
Point(353) = {00.8756, 00.0043, 00.0000, 00.0313};
Point(354) = {00.8341, -00.0137, 00.0000, 00.0313};
Point(355) = {00.7915, -00.0290, 00.0000, 00.0313};
Point(356) = {00.7481, -00.0416, 00.0000, 00.0313};
Point(357) = {00.7039, -00.0515, 00.0000, 00.0313};
Point(358) = {00.6593, -00.0586, 00.0000, 00.0313};
Point(359) = {00.6142, -00.0628, 00.0000, 00.0313};
Point(360) = {00.5690, -00.0643, 00.0000, 00.0313};
Point(361) = {00.5238, -00.0628, 00.0000, 00.0313};
Point(362) = {00.4788, -00.0586, 00.0000, 00.0313};
Point(363) = {00.4341, -00.0515, 00.0000, 00.0313};
Point(364) = {00.3900, -00.0416, 00.0000, 00.0313};
Point(365) = {00.3465, -00.0290, 00.0000, 00.0313};
Point(366) = {00.3040, -00.0137, 00.0000, 00.0313};
Point(367) = {00.2625, 00.0043, 00.0000, 00.0313};
Point(368) = {00.2222, 00.0248, 00.0000, 00.0313};
Point(369) = {00.1832, 00.0478, 00.0000, 00.0313};
Point(370) = {00.1458, 00.0732, 00.0000, 00.0313};
Point(371) = {00.1101, 00.1010, 00.0000, 00.0313};
Point(372) = {00.0761, 00.1309, 00.0000, 00.0313};
Point(373) = {00.0442, 00.1629, 00.0000, 00.0313};
Point(374) = {00.0143, 00.1968, 00.0000, 00.0313};
Point(375) = {-00.0135, 00.2325, 00.0000, 00.0313};
Point(376) = {-00.0389, 00.2699, 00.0000, 00.0313};
Point(377) = {-00.0619, 00.3089, 00.0000, 00.0313};
Point(378) = {-00.0825, 00.3492, 00.0000, 00.0313};
Point(379) = {-00.1004, 00.3907, 00.0000, 00.0313};
Point(380) = {-00.1157, 00.4332, 00.0000, 00.0313};
Point(381) = {-00.1284, 00.4767, 00.0000, 00.0313};
Point(382) = {-00.1382, 00.5208, 00.0000, 00.0313};
Point(383) = {-00.1453, 00.5655, 00.0000, 00.0313};
Point(384) = {-00.1496, 00.6105, 00.0000, 00.0313};
Point(385) = {-00.1510, 00.6557, 00.0000, 00.0313};
Point(386) = {-00.1496, 00.7009, 00.0000, 00.0313};
Point(387) = {-00.1453, 00.7460, 00.0000, 00.0313};
Point(388) = {-00.1382, 00.7906, 00.0000, 00.0313};
Point(389) = {-00.1284, 00.8348, 00.0000, 00.0313};
Point(390) = {-00.1157, 00.8782, 00.0000, 00.0313};
Point(391) = {-00.1004, 00.9208, 00.0000, 00.0313};
Point(392) = {-00.0825, 00.9623, 00.0000, 00.0313};
Point(393) = {-00.0619, 01.0026, 00.0000, 00.0313};
Point(394) = {-00.0389, 01.0415, 00.0000, 00.0313};
Point(395) = {-00.0135, 01.0789, 00.0000, 00.0313};
Point(396) = {00.0143, 01.1147, 00.0000, 00.0313};
Point(397) = {00.0442, 01.1486, 00.0000, 00.0313};
Point(398) = {00.0761, 01.1806, 00.0000, 00.0313};
Point(399) = {00.1101, 01.2105, 00.0000, 00.0313};
Point(400) = {00.1458, 01.2382, 00.0000, 00.0313};
Point(401) = {00.1832, 01.2636, 00.0000, 00.0313};
Point(402) = {00.2222, 01.2867, 00.0000, 00.0313};
Point(403) = {00.2625, 01.3072, 00.0000, 00.0313};
Point(404) = {00.3040, 01.3252, 00.0000, 00.0313};
Point(405) = {00.3465, 01.3405, 00.0000, 00.0313};
Point(406) = {00.3900, 01.3531, 00.0000, 00.0313};
Point(407) = {00.4341, 01.3630, 00.0000, 00.0313};
Point(408) = {00.4788, 01.3701, 00.0000, 00.0313};
Point(409) = {00.5238, 01.3743, 00.0000, 00.0313};
Point(410) = {00.5690, 01.3757, 00.0000, 00.0313};
CatmullRom(28) = {310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370, 371, 372, 373, 374, 375, 376, 377, 378, 379, 380, 381, 382, 383, 384, 385, 386, 387, 388, 389, 390, 391, 392, 393, 394, 395, 396, 397, 398, 399, 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 310};
Line Loop(29) = {28};
Plane Surface(30) = {29, 26};


//Bath Boundary Points//


Point(411) = {00.5690, 05.4557, 00.0000, 00.5000};
Point(412) = {00.8704, 05.4463, 00.0000, 00.5000};
Point(413) = {01.1706, 05.4179, 00.0000, 00.5000};
Point(414) = {01.4685, 05.3707, 00.0000, 00.5000};
Point(415) = {01.7627, 05.3049, 00.0000, 00.5000};
Point(416) = {02.0523, 05.2208, 00.0000, 00.5000};
Point(417) = {02.3360, 05.1187, 00.0000, 00.5000};
Point(418) = {02.6128, 04.9989, 00.0000, 00.5000};
Point(419) = {02.8814, 04.8620, 00.0000, 00.5000};
Point(420) = {03.1410, 04.7085, 00.0000, 00.5000};
Point(421) = {03.3904, 04.5390, 00.0000, 00.5000};
Point(422) = {03.6287, 04.3542, 00.0000, 00.5000};
Point(423) = {03.8548, 04.1548, 00.0000, 00.5000};
Point(424) = {04.0681, 03.9416, 00.0000, 00.5000};
Point(425) = {04.2675, 03.7154, 00.0000, 00.5000};
Point(426) = {04.4523, 03.4771, 00.0000, 00.5000};
Point(427) = {04.6218, 03.2277, 00.0000, 00.5000};
Point(428) = {04.7753, 02.9681, 00.0000, 00.5000};
Point(429) = {04.9122, 02.6995, 00.0000, 00.5000};
Point(430) = {05.0319, 02.4227, 00.0000, 00.5000};
Point(431) = {05.1341, 02.1390, 00.0000, 00.5000};
Point(432) = {05.2182, 01.8494, 00.0000, 00.5000};
Point(433) = {05.2840, 01.5552, 00.0000, 00.5000};
Point(434) = {05.3312, 01.2573, 00.0000, 00.5000};
Point(435) = {05.3596, 00.9571, 00.0000, 00.5000};
Point(436) = {05.3690, 00.6557, 00.0000, 00.5000};
Point(437) = {05.3596, 00.3543, 00.0000, 00.5000};
Point(438) = {05.3312, 00.0541, 00.0000, 00.5000};
Point(439) = {05.2840, -00.2437, 00.0000, 00.5000};
Point(440) = {05.2182, -00.5380, 00.0000, 00.5000};
Point(441) = {05.1341, -00.8276, 00.0000, 00.5000};
Point(442) = {05.0319, -01.1113, 00.0000, 00.5000};
Point(443) = {04.9122, -01.3880, 00.0000, 00.5000};
Point(444) = {04.7753, -01.6567, 00.0000, 00.5000};
Point(445) = {04.6218, -01.9162, 00.0000, 00.5000};
Point(446) = {04.4523, -02.1656, 00.0000, 00.5000};
Point(447) = {04.2675, -02.4039, 00.0000, 00.5000};
Point(448) = {04.0681, -02.6301, 00.0000, 00.5000};
Point(449) = {03.8548, -02.8433, 00.0000, 00.5000};
Point(450) = {03.6287, -03.0427, 00.0000, 00.5000};
Point(451) = {03.3904, -03.2276, 00.0000, 00.5000};
Point(452) = {03.1410, -03.3970, 00.0000, 00.5000};
Point(453) = {02.8814, -03.5505, 00.0000, 00.5000};
Point(454) = {02.6128, -03.6874, 00.0000, 00.5000};
Point(455) = {02.3360, -03.8072, 00.0000, 00.5000};
Point(456) = {02.0523, -03.9093, 00.0000, 00.5000};
Point(457) = {01.7627, -03.9935, 00.0000, 00.5000};
Point(458) = {01.4685, -04.0592, 00.0000, 00.5000};
Point(459) = {01.1706, -04.1064, 00.0000, 00.5000};
Point(460) = {00.8704, -04.1348, 00.0000, 00.5000};
Point(461) = {00.5690, -04.1443, 00.0000, 00.5000};
Point(462) = {00.2676, -04.1348, 00.0000, 00.5000};
Point(463) = {-00.0326, -04.1064, 00.0000, 00.5000};
Point(464) = {-00.3304, -04.0592, 00.0000, 00.5000};
Point(465) = {-00.6247, -03.9935, 00.0000, 00.5000};
Point(466) = {-00.9143, -03.9093, 00.0000, 00.5000};
Point(467) = {-01.1980, -03.8072, 00.0000, 00.5000};
Point(468) = {-01.4747, -03.6874, 00.0000, 00.5000};
Point(469) = {-01.7434, -03.5505, 00.0000, 00.5000};
Point(470) = {-02.0029, -03.3970, 00.0000, 00.5000};
Point(471) = {-02.2523, -03.2276, 00.0000, 00.5000};
Point(472) = {-02.4906, -03.0427, 00.0000, 00.5000};
Point(473) = {-02.7168, -02.8433, 00.0000, 00.5000};
Point(474) = {-02.9300, -02.6301, 00.0000, 00.5000};
Point(475) = {-03.1294, -02.4039, 00.0000, 00.5000};
Point(476) = {-03.3143, -02.1656, 00.0000, 00.5000};
Point(477) = {-03.4838, -01.9162, 00.0000, 00.5000};
Point(478) = {-03.6372, -01.6567, 00.0000, 00.5000};
Point(479) = {-03.7741, -01.3880, 00.0000, 00.5000};
Point(480) = {-03.8939, -01.1113, 00.0000, 00.5000};
Point(481) = {-03.9960, -00.8276, 00.0000, 00.5000};
Point(482) = {-04.0802, -00.5380, 00.0000, 00.5000};
Point(483) = {-04.1460, -00.2437, 00.0000, 00.5000};
Point(484) = {-04.1931, 00.0541, 00.0000, 00.5000};
Point(485) = {-04.2215, 00.3543, 00.0000, 00.5000};
Point(486) = {-04.2310, 00.6557, 00.0000, 00.5000};
Point(487) = {-04.2215, 00.9571, 00.0000, 00.5000};
Point(488) = {-04.1931, 01.2573, 00.0000, 00.5000};
Point(489) = {-04.1460, 01.5552, 00.0000, 00.5000};
Point(490) = {-04.0802, 01.8494, 00.0000, 00.5000};
Point(491) = {-03.9960, 02.1390, 00.0000, 00.5000};
Point(492) = {-03.8939, 02.4227, 00.0000, 00.5000};
Point(493) = {-03.7741, 02.6995, 00.0000, 00.5000};
Point(494) = {-03.6372, 02.9681, 00.0000, 00.5000};
Point(495) = {-03.4838, 03.2277, 00.0000, 00.5000};
Point(496) = {-03.3143, 03.4771, 00.0000, 00.5000};
Point(497) = {-03.1294, 03.7154, 00.0000, 00.5000};
Point(498) = {-02.9300, 03.9416, 00.0000, 00.5000};
Point(499) = {-02.7168, 04.1548, 00.0000, 00.5000};
Point(500) = {-02.4906, 04.3542, 00.0000, 00.5000};
Point(501) = {-02.2523, 04.5390, 00.0000, 00.5000};
Point(502) = {-02.0029, 04.7085, 00.0000, 00.5000};
Point(503) = {-01.7434, 04.8620, 00.0000, 00.5000};
Point(504) = {-01.4747, 04.9989, 00.0000, 00.5000};
Point(505) = {-01.1980, 05.1187, 00.0000, 00.5000};
Point(506) = {-00.9143, 05.2208, 00.0000, 00.5000};
Point(507) = {-00.6247, 05.3049, 00.0000, 00.5000};
Point(508) = {-00.3304, 05.3707, 00.0000, 00.5000};
Point(509) = {-00.0326, 05.4179, 00.0000, 00.5000};
Point(510) = {00.2676, 05.4463, 00.0000, 00.5000};
Point(511) = {00.5690, 05.4557, 00.0000, 00.5000};
CatmullRom(31) = {411, 412, 413, 414, 415, 416, 417, 418, 419, 420, 421, 422, 423, 424, 425, 426, 427, 428, 429, 430, 431, 432, 433, 434, 435, 436, 437, 438, 439, 440, 441, 442, 443, 444, 445, 446, 447, 448, 449, 450, 451, 452, 453, 454, 455, 456, 457, 458, 459, 460, 461, 462, 463, 464, 465, 466, 467, 468, 469, 470, 471, 472, 473, 474, 475, 476, 477, 478, 479, 480, 481, 482, 483, 484, 485, 486, 487, 488, 489, 490, 491, 492, 493, 494, 495, 496, 497, 498, 499, 500, 501, 502, 503, 504, 505, 506, 507, 508, 509, 510, 511, 411};
Line Loop(32) = {31};
Plane Surface(33) = {32, 29};


// Sublayer at  z = 11.5 //


//Fascicle 1//


//Endoneurium Points//


Point(512) = {00.4308, 01.2189, 11.5000, 00.0313};
Point(513) = {00.5105, 01.2216, 11.5000, 00.0313};
Point(514) = {00.5478, 01.1898, 11.5000, 00.0313};
Point(515) = {00.6195, 01.2189, 11.5000, 00.0313};
Point(516) = {00.7020, 01.2163, 11.5000, 00.0313};
Point(517) = {00.7073, 01.1528, 11.5000, 00.0313};
Point(518) = {00.7419, 01.1079, 11.5000, 00.0313};
Point(519) = {00.6887, 01.0576, 11.5000, 00.0313};
Point(520) = {00.6780, 01.0074, 11.5000, 00.0313};
Point(521) = {00.6913, 00.9624, 11.5000, 00.0313};
Point(522) = {00.7020, 00.9016, 11.5000, 00.0313};
Point(523) = {00.7099, 00.8382, 11.5000, 00.0313};
Point(524) = {00.6727, 00.7826, 11.5000, 00.0313};
Point(525) = {00.6328, 00.7853, 11.5000, 00.0313};
Point(526) = {00.6461, 00.7086, 11.5000, 00.0313};
Point(527) = {00.6887, 00.6478, 11.5000, 00.0313};
Point(528) = {00.6807, 00.6081, 11.5000, 00.0313};
Point(529) = {00.6435, 00.5896, 11.5000, 00.0313};
Point(530) = {00.5664, 00.5685, 11.5000, 00.0313};
Point(531) = {00.4627, 00.5976, 11.5000, 00.0313};
Point(532) = {00.4068, 00.6081, 11.5000, 00.0313};
Point(533) = {00.3483, 00.6028, 11.5000, 00.0313};
Point(534) = {00.3058, 00.5843, 11.5000, 00.0313};
Point(535) = {00.2207, 00.6108, 11.5000, 00.0313};
Point(536) = {00.1835, 00.6504, 11.5000, 00.0313};
Point(537) = {00.1329, 00.7139, 11.5000, 00.0313};
Point(538) = {00.1250, 00.7932, 11.5000, 00.0313};
Point(539) = {00.1329, 00.8487, 11.5000, 00.0313};
Point(540) = {00.1569, 00.8990, 11.5000, 00.0313};
Point(541) = {00.1888, 00.9624, 11.5000, 00.0313};
Point(542) = {00.2260, 01.0259, 11.5000, 00.0313};
Point(543) = {00.2526, 01.0761, 11.5000, 00.0313};
Point(544) = {00.2951, 01.1581, 11.5000, 00.0313};
Point(545) = {00.3510, 01.2031, 11.5000, 00.0313};
CatmullRom(34) = {512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 522, 523, 524, 525, 526, 527, 528, 529, 530, 531, 532, 533, 534, 535, 536, 537, 538, 539, 540, 541, 542, 543, 544, 545, 512};
Line Loop(35) = {34};
Plane Surface(36) = {35};


//Perineurium Points//


Point(546) = {00.4306, 01.2439, 11.5000, 00.0313};
Point(547) = {00.5163, 01.2459, 11.5000, 00.0313};
Point(548) = {00.5568, 01.2131, 11.5000, 00.0313};
Point(549) = {00.6320, 01.2406, 11.5000, 00.0313};
Point(550) = {00.7180, 01.2355, 11.5000, 00.0313};
Point(551) = {00.7255, 01.1700, 11.5000, 00.0313};
Point(552) = {00.7624, 01.1221, 11.5000, 00.0313};
Point(553) = {00.7198, 01.0711, 11.5000, 00.0313};
Point(554) = {00.7008, 01.0178, 11.5000, 00.0313};
Point(555) = {00.7155, 00.9688, 11.5000, 00.0313};
Point(556) = {00.7270, 00.9022, 11.5000, 00.0313};
Point(557) = {00.7344, 00.8331, 11.5000, 00.0313};
Point(558) = {00.6954, 00.7720, 11.5000, 00.0313};
Point(559) = {00.6547, 00.7632, 11.5000, 00.0313};
Point(560) = {00.6749, 00.6921, 11.5000, 00.0313};
Point(561) = {00.7066, 00.6304, 11.5000, 00.0313};
Point(562) = {00.6970, 00.5892, 11.5000, 00.0313};
Point(563) = {00.6576, 00.5690, 11.5000, 00.0313};
Point(564) = {00.5758, 00.5453, 11.5000, 00.0313};
Point(565) = {00.4651, 00.5727, 11.5000, 00.0313};
Point(566) = {00.4045, 00.5832, 11.5000, 00.0313};
Point(567) = {00.3413, 00.5788, 11.5000, 00.0313};
Point(568) = {00.2963, 00.5612, 11.5000, 00.0313};
Point(569) = {00.2057, 00.5908, 11.5000, 00.0313};
Point(570) = {00.1656, 00.6330, 11.5000, 00.0313};
Point(571) = {00.1115, 00.7010, 11.5000, 00.0313};
Point(572) = {00.1012, 00.7854, 11.5000, 00.0313};
Point(573) = {00.1082, 00.8449, 11.5000, 00.0313};
Point(574) = {00.1319, 00.8993, 11.5000, 00.0313};
Point(575) = {00.1647, 00.9691, 11.5000, 00.0313};
Point(576) = {00.2049, 01.0392, 11.5000, 00.0313};
Point(577) = {00.2349, 01.0938, 11.5000, 00.0313};
Point(578) = {00.2835, 01.1802, 11.5000, 00.0313};
Point(579) = {00.3445, 01.2272, 11.5000, 00.0313};
CatmullRom(37) = {546, 547, 548, 549, 550, 551, 552, 553, 554, 555, 556, 557, 558, 559, 560, 561, 562, 563, 564, 565, 566, 567, 568, 569, 570, 571, 572, 573, 574, 575, 576, 577, 578, 579, 546};
Line Loop(38) = {37};
Plane Surface(39) = {38, 35};


//Fascicle 2//


//Endoneurium Points//


Point(580) = {00.8136, 00.8540, 11.5000, 00.0313};
Point(581) = {00.8881, 00.8487, 11.5000, 00.0313};
Point(582) = {00.9360, 00.8117, 11.5000, 00.0313};
Point(583) = {00.9519, 00.7588, 11.5000, 00.0313};
Point(584) = {00.9865, 00.6927, 11.5000, 00.0313};
Point(585) = {00.9918, 00.6346, 11.5000, 00.0313};
Point(586) = {00.9732, 00.5579, 11.5000, 00.0313};
Point(587) = {00.9120, 00.5420, 11.5000, 00.0313};
Point(588) = {00.8429, 00.5843, 11.5000, 00.0313};
Point(589) = {00.8323, 00.6452, 11.5000, 00.0313};
Point(590) = {00.7738, 00.6875, 11.5000, 00.0313};
Point(591) = {00.7365, 00.7377, 11.5000, 00.0313};
Point(592) = {00.7525, 00.8117, 11.5000, 00.0313};
CatmullRom(40) = {580, 581, 582, 583, 584, 585, 586, 587, 588, 589, 590, 591, 592, 580};
Line Loop(41) = {40};
Plane Surface(42) = {41};


//Perineurium Points//


Point(593) = {00.8059, 00.8778, 11.5000, 00.0313};
Point(594) = {00.8920, 00.8734, 11.5000, 00.0313};
Point(595) = {00.9493, 00.8329, 11.5000, 00.0313};
Point(596) = {00.9725, 00.7731, 11.5000, 00.0313};
Point(597) = {01.0115, 00.6917, 11.5000, 00.0313};
Point(598) = {01.0142, 00.6234, 11.5000, 00.0313};
Point(599) = {00.9885, 00.5382, 11.5000, 00.0313};
Point(600) = {00.9194, 00.5181, 11.5000, 00.0313};
Point(601) = {00.8383, 00.5598, 11.5000, 00.0313};
Point(602) = {00.8193, 00.6237, 11.5000, 00.0313};
Point(603) = {00.7489, 00.6846, 11.5000, 00.0313};
Point(604) = {00.7127, 00.7451, 11.5000, 00.0313};
Point(605) = {00.7450, 00.8296, 11.5000, 00.0313};
CatmullRom(43) = {593, 594, 595, 596, 597, 598, 599, 600, 601, 602, 603, 604, 605, 593};
Line Loop(44) = {43};
Plane Surface(45) = {44, 41};


//Fascicle 3//


//Endoneurium Points//


Point(606) = {00.7445, 00.5077, 11.5000, 00.0313};
Point(607) = {00.7897, 00.4997, 11.5000, 00.0313};
Point(608) = {00.8296, 00.4468, 11.5000, 00.0313};
Point(609) = {00.8668, 00.3913, 11.5000, 00.0313};
Point(610) = {00.8854, 00.3517, 11.5000, 00.0313};
Point(611) = {00.8908, 00.2988, 11.5000, 00.0313};
Point(612) = {00.8721, 00.2433, 11.5000, 00.0313};
Point(613) = {00.8323, 00.1983, 11.5000, 00.0313};
Point(614) = {00.7605, 00.1745, 11.5000, 00.0313};
Point(615) = {00.6993, 00.1560, 11.5000, 00.0313};
Point(616) = {00.6009, 00.1401, 11.5000, 00.0313};
Point(617) = {00.5291, 00.1560, 11.5000, 00.0313};
Point(618) = {00.4786, 00.2062, 11.5000, 00.0313};
Point(619) = {00.4813, 00.2565, 11.5000, 00.0313};
Point(620) = {00.4813, 00.3358, 11.5000, 00.0313};
Point(621) = {00.5371, 00.3755, 11.5000, 00.0313};
Point(622) = {00.6222, 00.3728, 11.5000, 00.0313};
Point(623) = {00.6621, 00.3940, 11.5000, 00.0313};
Point(624) = {00.6860, 00.4733, 11.5000, 00.0313};
CatmullRom(46) = {606, 607, 608, 609, 610, 611, 612, 613, 614, 615, 616, 617, 618, 619, 620, 621, 622, 623, 624, 606};
Line Loop(47) = {46};
Plane Surface(48) = {47};


//Perineurium Points//


Point(625) = {00.7523, 00.5314, 11.5000, 00.0313};
Point(626) = {00.8025, 00.5212, 11.5000, 00.0313};
Point(627) = {00.8487, 00.4630, 11.5000, 00.0313};
Point(628) = {00.8903, 00.4000, 11.5000, 00.0313};
Point(629) = {00.9102, 00.3551, 11.5000, 00.0313};
Point(630) = {00.9156, 00.2958, 11.5000, 00.0313};
Point(631) = {00.8951, 00.2334, 11.5000, 00.0313};
Point(632) = {00.8513, 00.1821, 11.5000, 00.0313};
Point(633) = {00.7718, 00.1522, 11.5000, 00.0313};
Point(634) = {00.7015, 00.1311, 11.5000, 00.0313};
Point(635) = {00.5906, 00.1174, 11.5000, 00.0313};
Point(636) = {00.5121, 00.1377, 11.5000, 00.0313};
Point(637) = {00.4569, 00.1938, 11.5000, 00.0313};
Point(638) = {00.4575, 00.2486, 11.5000, 00.0313};
Point(639) = {00.4563, 00.3373, 11.5000, 00.0313};
Point(640) = {00.5135, 00.3837, 11.5000, 00.0313};
Point(641) = {00.6025, 00.3882, 11.5000, 00.0313};
Point(642) = {00.6544, 00.4178, 11.5000, 00.0313};
Point(643) = {00.6862, 00.4983, 11.5000, 00.0313};
CatmullRom(49) = {625, 626, 627, 628, 629, 630, 631, 632, 633, 634, 635, 636, 637, 638, 639, 640, 641, 642, 643, 625};
Line Loop(50) = {49};
Plane Surface(51) = {50, 47};


//    Epineurium Points   //


Point(644) = {00.1409, 01.0074, 11.5000, 00.0313};
Point(645) = {00.1861, 01.0867, 11.5000, 00.0313};
Point(646) = {00.2260, 01.1581, 11.5000, 00.0313};
Point(647) = {00.2712, 01.2321, 11.5000, 00.0313};
Point(648) = {00.3723, 01.2506, 11.5000, 00.0313};
Point(649) = {00.4866, 01.2877, 11.5000, 00.0313};
Point(650) = {00.5850, 01.2824, 11.5000, 00.0313};
Point(651) = {00.6621, 01.2903, 11.5000, 00.0313};
Point(652) = {00.7498, 01.2295, 11.5000, 00.0313};
Point(653) = {00.8004, 01.1475, 11.5000, 00.0313};
Point(654) = {00.8057, 01.0788, 11.5000, 00.0313};
Point(655) = {00.8535, 01.0312, 11.5000, 00.0313};
Point(656) = {00.9306, 00.9677, 11.5000, 00.0313};
Point(657) = {00.9865, 00.9096, 11.5000, 00.0313};
Point(658) = {01.0131, 00.8117, 11.5000, 00.0313};
Point(659) = {01.0370, 00.7139, 11.5000, 00.0313};
Point(660) = {01.0397, 00.6081, 11.5000, 00.0313};
Point(661) = {01.0104, 00.5262, 11.5000, 00.0313};
Point(662) = {01.0264, 00.4574, 11.5000, 00.0313};
Point(663) = {01.0104, 00.3860, 11.5000, 00.0313};
Point(664) = {00.9812, 00.3146, 11.5000, 00.0313};
Point(665) = {00.9652, 00.2433, 11.5000, 00.0313};
Point(666) = {00.9147, 00.1824, 11.5000, 00.0313};
Point(667) = {00.8429, 00.1058, 11.5000, 00.0313};
Point(668) = {00.7605, 00.0555, 11.5000, 00.0313};
Point(669) = {00.6541, 00.0317, 11.5000, 00.0313};
Point(670) = {00.5158, 00.0635, 11.5000, 00.0313};
Point(671) = {00.4414, 00.1111, 11.5000, 00.0313};
Point(672) = {00.4095, 00.1666, 11.5000, 00.0313};
Point(673) = {00.3776, 00.2274, 11.5000, 00.0313};
Point(674) = {00.3350, 00.3067, 11.5000, 00.0313};
Point(675) = {00.3271, 00.3834, 11.5000, 00.0313};
Point(676) = {00.3005, 00.4627, 11.5000, 00.0313};
Point(677) = {00.2154, 00.5130, 11.5000, 00.0313};
Point(678) = {00.1303, 00.6319, 11.5000, 00.0313};
Point(679) = {00.0957, 00.7245, 11.5000, 00.0313};
Point(680) = {00.0877, 00.8408, 11.5000, 00.0313};
Point(681) = {00.1037, 00.9334, 11.5000, 00.0313};
CatmullRom(52) = {644, 645, 646, 647, 648, 649, 650, 651, 652, 653, 654, 655, 656, 657, 658, 659, 660, 661, 662, 663, 664, 665, 666, 667, 668, 669, 670, 671, 672, 673, 674, 675, 676, 677, 678, 679, 680, 681, 644};
Line Loop(53) = {52};
Plane Surface(54) = {53};

// Bath Boundary Points //


Point(682) = {00.5690, 05.4557, 11.5000, 00.5000};
Point(683) = {00.8704, 05.4463, 11.5000, 00.5000};
Point(684) = {01.1706, 05.4179, 11.5000, 00.5000};
Point(685) = {01.4685, 05.3707, 11.5000, 00.5000};
Point(686) = {01.7627, 05.3049, 11.5000, 00.5000};
Point(687) = {02.0523, 05.2208, 11.5000, 00.5000};
Point(688) = {02.3360, 05.1187, 11.5000, 00.5000};
Point(689) = {02.6128, 04.9989, 11.5000, 00.5000};
Point(690) = {02.8814, 04.8620, 11.5000, 00.5000};
Point(691) = {03.1410, 04.7085, 11.5000, 00.5000};
Point(692) = {03.3904, 04.5390, 11.5000, 00.5000};
Point(693) = {03.6287, 04.3542, 11.5000, 00.5000};
Point(694) = {03.8548, 04.1548, 11.5000, 00.5000};
Point(695) = {04.0681, 03.9416, 11.5000, 00.5000};
Point(696) = {04.2675, 03.7154, 11.5000, 00.5000};
Point(697) = {04.4523, 03.4771, 11.5000, 00.5000};
Point(698) = {04.6218, 03.2277, 11.5000, 00.5000};
Point(699) = {04.7753, 02.9681, 11.5000, 00.5000};
Point(700) = {04.9122, 02.6995, 11.5000, 00.5000};
Point(701) = {05.0319, 02.4227, 11.5000, 00.5000};
Point(702) = {05.1341, 02.1390, 11.5000, 00.5000};
Point(703) = {05.2182, 01.8494, 11.5000, 00.5000};
Point(704) = {05.2840, 01.5552, 11.5000, 00.5000};
Point(705) = {05.3312, 01.2573, 11.5000, 00.5000};
Point(706) = {05.3596, 00.9571, 11.5000, 00.5000};
Point(707) = {05.3690, 00.6557, 11.5000, 00.5000};
Point(708) = {05.3596, 00.3543, 11.5000, 00.5000};
Point(709) = {05.3312, 00.0541, 11.5000, 00.5000};
Point(710) = {05.2840, -00.2437, 11.5000, 00.5000};
Point(711) = {05.2182, -00.5380, 11.5000, 00.5000};
Point(712) = {05.1341, -00.8276, 11.5000, 00.5000};
Point(713) = {05.0319, -01.1113, 11.5000, 00.5000};
Point(714) = {04.9122, -01.3880, 11.5000, 00.5000};
Point(715) = {04.7753, -01.6567, 11.5000, 00.5000};
Point(716) = {04.6218, -01.9162, 11.5000, 00.5000};
Point(717) = {04.4523, -02.1656, 11.5000, 00.5000};
Point(718) = {04.2675, -02.4039, 11.5000, 00.5000};
Point(719) = {04.0681, -02.6301, 11.5000, 00.5000};
Point(720) = {03.8548, -02.8433, 11.5000, 00.5000};
Point(721) = {03.6287, -03.0427, 11.5000, 00.5000};
Point(722) = {03.3904, -03.2276, 11.5000, 00.5000};
Point(723) = {03.1410, -03.3970, 11.5000, 00.5000};
Point(724) = {02.8814, -03.5505, 11.5000, 00.5000};
Point(725) = {02.6128, -03.6874, 11.5000, 00.5000};
Point(726) = {02.3360, -03.8072, 11.5000, 00.5000};
Point(727) = {02.0523, -03.9093, 11.5000, 00.5000};
Point(728) = {01.7627, -03.9935, 11.5000, 00.5000};
Point(729) = {01.4685, -04.0592, 11.5000, 00.5000};
Point(730) = {01.1706, -04.1064, 11.5000, 00.5000};
Point(731) = {00.8704, -04.1348, 11.5000, 00.5000};
Point(732) = {00.5690, -04.1443, 11.5000, 00.5000};
Point(733) = {00.2676, -04.1348, 11.5000, 00.5000};
Point(734) = {-00.0326, -04.1064, 11.5000, 00.5000};
Point(735) = {-00.3304, -04.0592, 11.5000, 00.5000};
Point(736) = {-00.6247, -03.9935, 11.5000, 00.5000};
Point(737) = {-00.9143, -03.9093, 11.5000, 00.5000};
Point(738) = {-01.1980, -03.8072, 11.5000, 00.5000};
Point(739) = {-01.4747, -03.6874, 11.5000, 00.5000};
Point(740) = {-01.7434, -03.5505, 11.5000, 00.5000};
Point(741) = {-02.0029, -03.3970, 11.5000, 00.5000};
Point(742) = {-02.2523, -03.2276, 11.5000, 00.5000};
Point(743) = {-02.4906, -03.0427, 11.5000, 00.5000};
Point(744) = {-02.7168, -02.8433, 11.5000, 00.5000};
Point(745) = {-02.9300, -02.6301, 11.5000, 00.5000};
Point(746) = {-03.1294, -02.4039, 11.5000, 00.5000};
Point(747) = {-03.3143, -02.1656, 11.5000, 00.5000};
Point(748) = {-03.4838, -01.9162, 11.5000, 00.5000};
Point(749) = {-03.6372, -01.6567, 11.5000, 00.5000};
Point(750) = {-03.7741, -01.3880, 11.5000, 00.5000};
Point(751) = {-03.8939, -01.1113, 11.5000, 00.5000};
Point(752) = {-03.9960, -00.8276, 11.5000, 00.5000};
Point(753) = {-04.0802, -00.5380, 11.5000, 00.5000};
Point(754) = {-04.1460, -00.2437, 11.5000, 00.5000};
Point(755) = {-04.1931, 00.0541, 11.5000, 00.5000};
Point(756) = {-04.2215, 00.3543, 11.5000, 00.5000};
Point(757) = {-04.2310, 00.6557, 11.5000, 00.5000};
Point(758) = {-04.2215, 00.9571, 11.5000, 00.5000};
Point(759) = {-04.1931, 01.2573, 11.5000, 00.5000};
Point(760) = {-04.1460, 01.5552, 11.5000, 00.5000};
Point(761) = {-04.0802, 01.8494, 11.5000, 00.5000};
Point(762) = {-03.9960, 02.1390, 11.5000, 00.5000};
Point(763) = {-03.8939, 02.4227, 11.5000, 00.5000};
Point(764) = {-03.7741, 02.6995, 11.5000, 00.5000};
Point(765) = {-03.6372, 02.9681, 11.5000, 00.5000};
Point(766) = {-03.4838, 03.2277, 11.5000, 00.5000};
Point(767) = {-03.3143, 03.4771, 11.5000, 00.5000};
Point(768) = {-03.1294, 03.7154, 11.5000, 00.5000};
Point(769) = {-02.9300, 03.9416, 11.5000, 00.5000};
Point(770) = {-02.7168, 04.1548, 11.5000, 00.5000};
Point(771) = {-02.4906, 04.3542, 11.5000, 00.5000};
Point(772) = {-02.2523, 04.5390, 11.5000, 00.5000};
Point(773) = {-02.0029, 04.7085, 11.5000, 00.5000};
Point(774) = {-01.7434, 04.8620, 11.5000, 00.5000};
Point(775) = {-01.4747, 04.9989, 11.5000, 00.5000};
Point(776) = {-01.1980, 05.1187, 11.5000, 00.5000};
Point(777) = {-00.9143, 05.2208, 11.5000, 00.5000};
Point(778) = {-00.6247, 05.3049, 11.5000, 00.5000};
Point(779) = {-00.3304, 05.3707, 11.5000, 00.5000};
Point(780) = {-00.0326, 05.4179, 11.5000, 00.5000};
Point(781) = {00.2676, 05.4463, 11.5000, 00.5000};
Point(782) = {00.5690, 05.4557, 11.5000, 00.5000};
CatmullRom(55) = {682, 683, 684, 685, 686, 687, 688, 689, 690, 691, 692, 693, 694, 695, 696, 697, 698, 699, 700, 701, 702, 703, 704, 705, 706, 707, 708, 709, 710, 711, 712, 713, 714, 715, 716, 717, 718, 719, 720, 721, 722, 723, 724, 725, 726, 727, 728, 729, 730, 731, 732, 733, 734, 735, 736, 737, 738, 739, 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750, 751, 752, 753, 754, 755, 756, 757, 758, 759, 760, 761, 762, 763, 764, 765, 766, 767, 768, 769, 770, 771, 772, 773, 774, 775, 776, 777, 778, 779, 780, 781, 782, 682};
Line Loop(56) = {55};
Plane Surface(57) = {56, 53};


// Sublayer at  z = -11.5 //


//Fascicle 1//


//Endoneurium Points//


Point(783) = {00.4308, 01.2189, -11.5000, 00.0313};
Point(784) = {00.5105, 01.2216, -11.5000, 00.0313};
Point(785) = {00.5478, 01.1898, -11.5000, 00.0313};
Point(786) = {00.6195, 01.2189, -11.5000, 00.0313};
Point(787) = {00.7020, 01.2163, -11.5000, 00.0313};
Point(788) = {00.7073, 01.1528, -11.5000, 00.0313};
Point(789) = {00.7419, 01.1079, -11.5000, 00.0313};
Point(790) = {00.6887, 01.0576, -11.5000, 00.0313};
Point(791) = {00.6780, 01.0074, -11.5000, 00.0313};
Point(792) = {00.6913, 00.9624, -11.5000, 00.0313};
Point(793) = {00.7020, 00.9016, -11.5000, 00.0313};
Point(794) = {00.7099, 00.8382, -11.5000, 00.0313};
Point(795) = {00.6727, 00.7826, -11.5000, 00.0313};
Point(796) = {00.6328, 00.7853, -11.5000, 00.0313};
Point(797) = {00.6461, 00.7086, -11.5000, 00.0313};
Point(798) = {00.6887, 00.6478, -11.5000, 00.0313};
Point(799) = {00.6807, 00.6081, -11.5000, 00.0313};
Point(800) = {00.6435, 00.5896, -11.5000, 00.0313};
Point(801) = {00.5664, 00.5685, -11.5000, 00.0313};
Point(802) = {00.4627, 00.5976, -11.5000, 00.0313};
Point(803) = {00.4068, 00.6081, -11.5000, 00.0313};
Point(804) = {00.3483, 00.6028, -11.5000, 00.0313};
Point(805) = {00.3058, 00.5843, -11.5000, 00.0313};
Point(806) = {00.2207, 00.6108, -11.5000, 00.0313};
Point(807) = {00.1835, 00.6504, -11.5000, 00.0313};
Point(808) = {00.1329, 00.7139, -11.5000, 00.0313};
Point(809) = {00.1250, 00.7932, -11.5000, 00.0313};
Point(810) = {00.1329, 00.8487, -11.5000, 00.0313};
Point(811) = {00.1569, 00.8990, -11.5000, 00.0313};
Point(812) = {00.1888, 00.9624, -11.5000, 00.0313};
Point(813) = {00.2260, 01.0259, -11.5000, 00.0313};
Point(814) = {00.2526, 01.0761, -11.5000, 00.0313};
Point(815) = {00.2951, 01.1581, -11.5000, 00.0313};
Point(816) = {00.3510, 01.2031, -11.5000, 00.0313};
CatmullRom(58) = {783, 784, 785, 786, 787, 788, 789, 790, 791, 792, 793, 794, 795, 796, 797, 798, 799, 800, 801, 802, 803, 804, 805, 806, 807, 808, 809, 810, 811, 812, 813, 814, 815, 816, 783};
Line Loop(59) = {58};
Plane Surface(60) = {59};


//Perineurium Points//


Point(817) = {00.4306, 01.2439, -11.5000, 00.0313};
Point(818) = {00.5163, 01.2459, -11.5000, 00.0313};
Point(819) = {00.5568, 01.2131, -11.5000, 00.0313};
Point(820) = {00.6320, 01.2406, -11.5000, 00.0313};
Point(821) = {00.7180, 01.2355, -11.5000, 00.0313};
Point(822) = {00.7255, 01.1700, -11.5000, 00.0313};
Point(823) = {00.7624, 01.1221, -11.5000, 00.0313};
Point(824) = {00.7198, 01.0711, -11.5000, 00.0313};
Point(825) = {00.7008, 01.0178, -11.5000, 00.0313};
Point(826) = {00.7155, 00.9688, -11.5000, 00.0313};
Point(827) = {00.7270, 00.9022, -11.5000, 00.0313};
Point(828) = {00.7344, 00.8331, -11.5000, 00.0313};
Point(829) = {00.6954, 00.7720, -11.5000, 00.0313};
Point(830) = {00.6547, 00.7632, -11.5000, 00.0313};
Point(831) = {00.6749, 00.6921, -11.5000, 00.0313};
Point(832) = {00.7066, 00.6304, -11.5000, 00.0313};
Point(833) = {00.6970, 00.5892, -11.5000, 00.0313};
Point(834) = {00.6576, 00.5690, -11.5000, 00.0313};
Point(835) = {00.5758, 00.5453, -11.5000, 00.0313};
Point(836) = {00.4651, 00.5727, -11.5000, 00.0313};
Point(837) = {00.4045, 00.5832, -11.5000, 00.0313};
Point(838) = {00.3413, 00.5788, -11.5000, 00.0313};
Point(839) = {00.2963, 00.5612, -11.5000, 00.0313};
Point(840) = {00.2057, 00.5908, -11.5000, 00.0313};
Point(841) = {00.1656, 00.6330, -11.5000, 00.0313};
Point(842) = {00.1115, 00.7010, -11.5000, 00.0313};
Point(843) = {00.1012, 00.7854, -11.5000, 00.0313};
Point(844) = {00.1082, 00.8449, -11.5000, 00.0313};
Point(845) = {00.1319, 00.8993, -11.5000, 00.0313};
Point(846) = {00.1647, 00.9691, -11.5000, 00.0313};
Point(847) = {00.2049, 01.0392, -11.5000, 00.0313};
Point(848) = {00.2349, 01.0938, -11.5000, 00.0313};
Point(849) = {00.2835, 01.1802, -11.5000, 00.0313};
Point(850) = {00.3445, 01.2272, -11.5000, 00.0313};
CatmullRom(61) = {817, 818, 819, 820, 821, 822, 823, 824, 825, 826, 827, 828, 829, 830, 831, 832, 833, 834, 835, 836, 837, 838, 839, 840, 841, 842, 843, 844, 845, 846, 847, 848, 849, 850, 817};
Line Loop(62) = {61};
Plane Surface(63) = {62, 59};


//Fascicle 2//


//Endoneurium Points//


Point(851) = {00.8136, 00.8540, -11.5000, 00.0313};
Point(852) = {00.8881, 00.8487, -11.5000, 00.0313};
Point(853) = {00.9360, 00.8117, -11.5000, 00.0313};
Point(854) = {00.9519, 00.7588, -11.5000, 00.0313};
Point(855) = {00.9865, 00.6927, -11.5000, 00.0313};
Point(856) = {00.9918, 00.6346, -11.5000, 00.0313};
Point(857) = {00.9732, 00.5579, -11.5000, 00.0313};
Point(858) = {00.9120, 00.5420, -11.5000, 00.0313};
Point(859) = {00.8429, 00.5843, -11.5000, 00.0313};
Point(860) = {00.8323, 00.6452, -11.5000, 00.0313};
Point(861) = {00.7738, 00.6875, -11.5000, 00.0313};
Point(862) = {00.7365, 00.7377, -11.5000, 00.0313};
Point(863) = {00.7525, 00.8117, -11.5000, 00.0313};
CatmullRom(64) = {851, 852, 853, 854, 855, 856, 857, 858, 859, 860, 861, 862, 863, 851};
Line Loop(65) = {64};
Plane Surface(66) = {65};


//Perineurium Points//


Point(864) = {00.8059, 00.8778, -11.5000, 00.0313};
Point(865) = {00.8920, 00.8734, -11.5000, 00.0313};
Point(866) = {00.9493, 00.8329, -11.5000, 00.0313};
Point(867) = {00.9725, 00.7731, -11.5000, 00.0313};
Point(868) = {01.0115, 00.6917, -11.5000, 00.0313};
Point(869) = {01.0142, 00.6234, -11.5000, 00.0313};
Point(870) = {00.9885, 00.5382, -11.5000, 00.0313};
Point(871) = {00.9194, 00.5181, -11.5000, 00.0313};
Point(872) = {00.8383, 00.5598, -11.5000, 00.0313};
Point(873) = {00.8193, 00.6237, -11.5000, 00.0313};
Point(874) = {00.7489, 00.6846, -11.5000, 00.0313};
Point(875) = {00.7127, 00.7451, -11.5000, 00.0313};
Point(876) = {00.7450, 00.8296, -11.5000, 00.0313};
CatmullRom(67) = {864, 865, 866, 867, 868, 869, 870, 871, 872, 873, 874, 875, 876, 864};
Line Loop(68) = {67};
Plane Surface(69) = {68, 65};


//Fascicle 3//


//Endoneurium Points//


Point(877) = {00.7445, 00.5077, -11.5000, 00.0313};
Point(878) = {00.7897, 00.4997, -11.5000, 00.0313};
Point(879) = {00.8296, 00.4468, -11.5000, 00.0313};
Point(880) = {00.8668, 00.3913, -11.5000, 00.0313};
Point(881) = {00.8854, 00.3517, -11.5000, 00.0313};
Point(882) = {00.8908, 00.2988, -11.5000, 00.0313};
Point(883) = {00.8721, 00.2433, -11.5000, 00.0313};
Point(884) = {00.8323, 00.1983, -11.5000, 00.0313};
Point(885) = {00.7605, 00.1745, -11.5000, 00.0313};
Point(886) = {00.6993, 00.1560, -11.5000, 00.0313};
Point(887) = {00.6009, 00.1401, -11.5000, 00.0313};
Point(888) = {00.5291, 00.1560, -11.5000, 00.0313};
Point(889) = {00.4786, 00.2062, -11.5000, 00.0313};
Point(890) = {00.4813, 00.2565, -11.5000, 00.0313};
Point(891) = {00.4813, 00.3358, -11.5000, 00.0313};
Point(892) = {00.5371, 00.3755, -11.5000, 00.0313};
Point(893) = {00.6222, 00.3728, -11.5000, 00.0313};
Point(894) = {00.6621, 00.3940, -11.5000, 00.0313};
Point(895) = {00.6860, 00.4733, -11.5000, 00.0313};
CatmullRom(70) = {877, 878, 879, 880, 881, 882, 883, 884, 885, 886, 887, 888, 889, 890, 891, 892, 893, 894, 895, 877};
Line Loop(71) = {70};
Plane Surface(72) = {71};


//Perineurium Points//


Point(896) = {00.7523, 00.5314, -11.5000, 00.0313};
Point(897) = {00.8025, 00.5212, -11.5000, 00.0313};
Point(898) = {00.8487, 00.4630, -11.5000, 00.0313};
Point(899) = {00.8903, 00.4000, -11.5000, 00.0313};
Point(900) = {00.9102, 00.3551, -11.5000, 00.0313};
Point(901) = {00.9156, 00.2958, -11.5000, 00.0313};
Point(902) = {00.8951, 00.2334, -11.5000, 00.0313};
Point(903) = {00.8513, 00.1821, -11.5000, 00.0313};
Point(904) = {00.7718, 00.1522, -11.5000, 00.0313};
Point(905) = {00.7015, 00.1311, -11.5000, 00.0313};
Point(906) = {00.5906, 00.1174, -11.5000, 00.0313};
Point(907) = {00.5121, 00.1377, -11.5000, 00.0313};
Point(908) = {00.4569, 00.1938, -11.5000, 00.0313};
Point(909) = {00.4575, 00.2486, -11.5000, 00.0313};
Point(910) = {00.4563, 00.3373, -11.5000, 00.0313};
Point(911) = {00.5135, 00.3837, -11.5000, 00.0313};
Point(912) = {00.6025, 00.3882, -11.5000, 00.0313};
Point(913) = {00.6544, 00.4178, -11.5000, 00.0313};
Point(914) = {00.6862, 00.4983, -11.5000, 00.0313};
CatmullRom(73) = {896, 897, 898, 899, 900, 901, 902, 903, 904, 905, 906, 907, 908, 909, 910, 911, 912, 913, 914, 896};
Line Loop(74) = {73};
Plane Surface(75) = {74, 71};


//    Epineurium Points   //


Point(915) = {00.1409, 01.0074, -11.5000, 00.0313};
Point(916) = {00.1861, 01.0867, -11.5000, 00.0313};
Point(917) = {00.2260, 01.1581, -11.5000, 00.0313};
Point(918) = {00.2712, 01.2321, -11.5000, 00.0313};
Point(919) = {00.3723, 01.2506, -11.5000, 00.0313};
Point(920) = {00.4866, 01.2877, -11.5000, 00.0313};
Point(921) = {00.5850, 01.2824, -11.5000, 00.0313};
Point(922) = {00.6621, 01.2903, -11.5000, 00.0313};
Point(923) = {00.7498, 01.2295, -11.5000, 00.0313};
Point(924) = {00.8004, 01.1475, -11.5000, 00.0313};
Point(925) = {00.8057, 01.0788, -11.5000, 00.0313};
Point(926) = {00.8535, 01.0312, -11.5000, 00.0313};
Point(927) = {00.9306, 00.9677, -11.5000, 00.0313};
Point(928) = {00.9865, 00.9096, -11.5000, 00.0313};
Point(929) = {01.0131, 00.8117, -11.5000, 00.0313};
Point(930) = {01.0370, 00.7139, -11.5000, 00.0313};
Point(931) = {01.0397, 00.6081, -11.5000, 00.0313};
Point(932) = {01.0104, 00.5262, -11.5000, 00.0313};
Point(933) = {01.0264, 00.4574, -11.5000, 00.0313};
Point(934) = {01.0104, 00.3860, -11.5000, 00.0313};
Point(935) = {00.9812, 00.3146, -11.5000, 00.0313};
Point(936) = {00.9652, 00.2433, -11.5000, 00.0313};
Point(937) = {00.9147, 00.1824, -11.5000, 00.0313};
Point(938) = {00.8429, 00.1058, -11.5000, 00.0313};
Point(939) = {00.7605, 00.0555, -11.5000, 00.0313};
Point(940) = {00.6541, 00.0317, -11.5000, 00.0313};
Point(941) = {00.5158, 00.0635, -11.5000, 00.0313};
Point(942) = {00.4414, 00.1111, -11.5000, 00.0313};
Point(943) = {00.4095, 00.1666, -11.5000, 00.0313};
Point(944) = {00.3776, 00.2274, -11.5000, 00.0313};
Point(945) = {00.3350, 00.3067, -11.5000, 00.0313};
Point(946) = {00.3271, 00.3834, -11.5000, 00.0313};
Point(947) = {00.3005, 00.4627, -11.5000, 00.0313};
Point(948) = {00.2154, 00.5130, -11.5000, 00.0313};
Point(949) = {00.1303, 00.6319, -11.5000, 00.0313};
Point(950) = {00.0957, 00.7245, -11.5000, 00.0313};
Point(951) = {00.0877, 00.8408, -11.5000, 00.0313};
Point(952) = {00.1037, 00.9334, -11.5000, 00.0313};
CatmullRom(76) = {915, 916, 917, 918, 919, 920, 921, 922, 923, 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, 940, 941, 942, 943, 944, 945, 946, 947, 948, 949, 950, 951, 952, 915};
Line Loop(77) = {76};
Plane Surface(78) = {77, 62, 68, 74};

// Bath Boundary Points //


Point(953) = {00.5690, 05.4557, -11.5000, 00.5000};
Point(954) = {00.8704, 05.4463, -11.5000, 00.5000};
Point(955) = {01.1706, 05.4179, -11.5000, 00.5000};
Point(956) = {01.4685, 05.3707, -11.5000, 00.5000};
Point(957) = {01.7627, 05.3049, -11.5000, 00.5000};
Point(958) = {02.0523, 05.2208, -11.5000, 00.5000};
Point(959) = {02.3360, 05.1187, -11.5000, 00.5000};
Point(960) = {02.6128, 04.9989, -11.5000, 00.5000};
Point(961) = {02.8814, 04.8620, -11.5000, 00.5000};
Point(962) = {03.1410, 04.7085, -11.5000, 00.5000};
Point(963) = {03.3904, 04.5390, -11.5000, 00.5000};
Point(964) = {03.6287, 04.3542, -11.5000, 00.5000};
Point(965) = {03.8548, 04.1548, -11.5000, 00.5000};
Point(966) = {04.0681, 03.9416, -11.5000, 00.5000};
Point(967) = {04.2675, 03.7154, -11.5000, 00.5000};
Point(968) = {04.4523, 03.4771, -11.5000, 00.5000};
Point(969) = {04.6218, 03.2277, -11.5000, 00.5000};
Point(970) = {04.7753, 02.9681, -11.5000, 00.5000};
Point(971) = {04.9122, 02.6995, -11.5000, 00.5000};
Point(972) = {05.0319, 02.4227, -11.5000, 00.5000};
Point(973) = {05.1341, 02.1390, -11.5000, 00.5000};
Point(974) = {05.2182, 01.8494, -11.5000, 00.5000};
Point(975) = {05.2840, 01.5552, -11.5000, 00.5000};
Point(976) = {05.3312, 01.2573, -11.5000, 00.5000};
Point(977) = {05.3596, 00.9571, -11.5000, 00.5000};
Point(978) = {05.3690, 00.6557, -11.5000, 00.5000};
Point(979) = {05.3596, 00.3543, -11.5000, 00.5000};
Point(980) = {05.3312, 00.0541, -11.5000, 00.5000};
Point(981) = {05.2840, -00.2437, -11.5000, 00.5000};
Point(982) = {05.2182, -00.5380, -11.5000, 00.5000};
Point(983) = {05.1341, -00.8276, -11.5000, 00.5000};
Point(984) = {05.0319, -01.1113, -11.5000, 00.5000};
Point(985) = {04.9122, -01.3880, -11.5000, 00.5000};
Point(986) = {04.7753, -01.6567, -11.5000, 00.5000};
Point(987) = {04.6218, -01.9162, -11.5000, 00.5000};
Point(988) = {04.4523, -02.1656, -11.5000, 00.5000};
Point(989) = {04.2675, -02.4039, -11.5000, 00.5000};
Point(990) = {04.0681, -02.6301, -11.5000, 00.5000};
Point(991) = {03.8548, -02.8433, -11.5000, 00.5000};
Point(992) = {03.6287, -03.0427, -11.5000, 00.5000};
Point(993) = {03.3904, -03.2276, -11.5000, 00.5000};
Point(994) = {03.1410, -03.3970, -11.5000, 00.5000};
Point(995) = {02.8814, -03.5505, -11.5000, 00.5000};
Point(996) = {02.6128, -03.6874, -11.5000, 00.5000};
Point(997) = {02.3360, -03.8072, -11.5000, 00.5000};
Point(998) = {02.0523, -03.9093, -11.5000, 00.5000};
Point(999) = {01.7627, -03.9935, -11.5000, 00.5000};
Point(1000) = {01.4685, -04.0592, -11.5000, 00.5000};
Point(1001) = {01.1706, -04.1064, -11.5000, 00.5000};
Point(1002) = {00.8704, -04.1348, -11.5000, 00.5000};
Point(1003) = {00.5690, -04.1443, -11.5000, 00.5000};
Point(1004) = {00.2676, -04.1348, -11.5000, 00.5000};
Point(1005) = {-00.0326, -04.1064, -11.5000, 00.5000};
Point(1006) = {-00.3304, -04.0592, -11.5000, 00.5000};
Point(1007) = {-00.6247, -03.9935, -11.5000, 00.5000};
Point(1008) = {-00.9143, -03.9093, -11.5000, 00.5000};
Point(1009) = {-01.1980, -03.8072, -11.5000, 00.5000};
Point(1010) = {-01.4747, -03.6874, -11.5000, 00.5000};
Point(1011) = {-01.7434, -03.5505, -11.5000, 00.5000};
Point(1012) = {-02.0029, -03.3970, -11.5000, 00.5000};
Point(1013) = {-02.2523, -03.2276, -11.5000, 00.5000};
Point(1014) = {-02.4906, -03.0427, -11.5000, 00.5000};
Point(1015) = {-02.7168, -02.8433, -11.5000, 00.5000};
Point(1016) = {-02.9300, -02.6301, -11.5000, 00.5000};
Point(1017) = {-03.1294, -02.4039, -11.5000, 00.5000};
Point(1018) = {-03.3143, -02.1656, -11.5000, 00.5000};
Point(1019) = {-03.4838, -01.9162, -11.5000, 00.5000};
Point(1020) = {-03.6372, -01.6567, -11.5000, 00.5000};
Point(1021) = {-03.7741, -01.3880, -11.5000, 00.5000};
Point(1022) = {-03.8939, -01.1113, -11.5000, 00.5000};
Point(1023) = {-03.9960, -00.8276, -11.5000, 00.5000};
Point(1024) = {-04.0802, -00.5380, -11.5000, 00.5000};
Point(1025) = {-04.1460, -00.2437, -11.5000, 00.5000};
Point(1026) = {-04.1931, 00.0541, -11.5000, 00.5000};
Point(1027) = {-04.2215, 00.3543, -11.5000, 00.5000};
Point(1028) = {-04.2310, 00.6557, -11.5000, 00.5000};
Point(1029) = {-04.2215, 00.9571, -11.5000, 00.5000};
Point(1030) = {-04.1931, 01.2573, -11.5000, 00.5000};
Point(1031) = {-04.1460, 01.5552, -11.5000, 00.5000};
Point(1032) = {-04.0802, 01.8494, -11.5000, 00.5000};
Point(1033) = {-03.9960, 02.1390, -11.5000, 00.5000};
Point(1034) = {-03.8939, 02.4227, -11.5000, 00.5000};
Point(1035) = {-03.7741, 02.6995, -11.5000, 00.5000};
Point(1036) = {-03.6372, 02.9681, -11.5000, 00.5000};
Point(1037) = {-03.4838, 03.2277, -11.5000, 00.5000};
Point(1038) = {-03.3143, 03.4771, -11.5000, 00.5000};
Point(1039) = {-03.1294, 03.7154, -11.5000, 00.5000};
Point(1040) = {-02.9300, 03.9416, -11.5000, 00.5000};
Point(1041) = {-02.7168, 04.1548, -11.5000, 00.5000};
Point(1042) = {-02.4906, 04.3542, -11.5000, 00.5000};
Point(1043) = {-02.2523, 04.5390, -11.5000, 00.5000};
Point(1044) = {-02.0029, 04.7085, -11.5000, 00.5000};
Point(1045) = {-01.7434, 04.8620, -11.5000, 00.5000};
Point(1046) = {-01.4747, 04.9989, -11.5000, 00.5000};
Point(1047) = {-01.1980, 05.1187, -11.5000, 00.5000};
Point(1048) = {-00.9143, 05.2208, -11.5000, 00.5000};
Point(1049) = {-00.6247, 05.3049, -11.5000, 00.5000};
Point(1050) = {-00.3304, 05.3707, -11.5000, 00.5000};
Point(1051) = {-00.0326, 05.4179, -11.5000, 00.5000};
Point(1052) = {00.2676, 05.4463, -11.5000, 00.5000};
Point(1053) = {00.5690, 05.4557, -11.5000, 00.5000};
CatmullRom(79) = {953, 954, 955, 956, 957, 958, 959, 960, 961, 962, 963, 964, 965, 966, 967, 968, 969, 970, 971, 972, 973, 974, 975, 976, 977, 978, 979, 980, 981, 982, 983, 984, 985, 986, 987, 988, 989, 990, 991, 992, 993, 994, 995, 996, 997, 998, 999, 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015, 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023, 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031, 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039, 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047, 1048, 1049, 1050, 1051, 1052, 1053, 953};
Line Loop(80) = {79};
Plane Surface(81) = {80, 77};




// Extrusion //


out[] = Extrude {0, 0, 25} {
      Surface{3}; Layers{100, 1};
};
endoneurium_segments[0] = out[1];
out[] = Extrude {0, 0, -25} {
      Surface{3}; Layers{100, 1};
};
endoneurium_segments[1] = out[1];
out[] = Extrude {0, 0, 25} {
      Surface{6}; Layers{100, 1};
};
perineurium_segments[0] = out[1];
out[] = Extrude {0, 0, -25} {
      Surface{6}; Layers{100, 1};
};
perineurium_segments[1] = out[1];
out[] = Extrude {0, 0, 25} {
      Surface{9}; Layers{100, 1};
};
endoneurium_segments[2] = out[1];
out[] = Extrude {0, 0, -25} {
      Surface{9}; Layers{100, 1};
};
endoneurium_segments[3] = out[1];
out[] = Extrude {0, 0, 25} {
      Surface{12}; Layers{100, 1};
};
perineurium_segments[2] = out[1];
out[] = Extrude {0, 0, -25} {
      Surface{12}; Layers{100, 1};
};
perineurium_segments[3] = out[1];
out[] = Extrude {0, 0, 25} {
      Surface{15}; Layers{100, 1};
};
endoneurium_segments[4] = out[1];
out[] = Extrude {0, 0, -25} {
      Surface{15}; Layers{100, 1};
};
endoneurium_segments[5] = out[1];
out[] = Extrude {0, 0, 25} {
      Surface{18}; Layers{100, 1};
};
perineurium_segments[4] = out[1];
out[] = Extrude {0, 0, -25} {
      Surface{18}; Layers{100, 1};
};
perineurium_segments[5] = out[1];
out[] = Extrude {0, 0, 25} {
      Surface{21}; Layers{100, 1};
};
epineurium_segments[0] = out[1];
out[] = Extrude {0, 0, -25} {
      Surface{21}; Layers{100, 1};
};
epineurium_segments[1] = out[1];
out[] = Extrude {0, 0, 11.5} {
      Surface{24}; Layers{46, 1};
};
encapsulation_tissue_segments[0] = out[1];
out[] = Extrude {0, 0, -11.5} {
      Surface{24}; Layers{46, 1};
};
encapsulation_tissue_segments[1] = out[1];
out[] = Extrude {0, 0, 11.5} {
      Surface{27}; Layers{46, 1};
};
saline_segments[0] = out[1];
out[] = Extrude {0, 0, -11.5} {
      Surface{27}; Layers{46, 1};
};
saline_segments[1] = out[1];
out[] = Extrude {0, 0, 11.5} {
      Surface{30}; Layers{46, 1};
};
cuff_segments[0] = out[1];
out[] = Extrude {0, 0, -11.5} {
      Surface{30}; Layers{46, 1};
};
cuff_segments[1] = out[1];
out[] = Extrude {0, 0, 11.5} {
      Surface{33}; Layers{46, 1};
};
saline_segments[2] = out[1];
out[] = Extrude {0, 0, -11.5} {
      Surface{33}; Layers{46, 1};
};
saline_segments[3] = out[1];
out[] = Extrude {0, 0, 13.5} {
      Surface{57}; Layers{54, 1};
};
saline_segments[4] = out[1];
out[] = Extrude {0, 0, -13.5} {
      Surface{81}; Layers{54, 1};
};
saline_segments[5] = out[1];








endoneurium_index = 1;
perineurium_index = 2;
epineurium_index = 3;
encapsulation_tissue_index = 4;
saline_index = 5;
cuff_index = 6;








Physical Volume(endoneurium_index) = {endoneurium_segments[]};
Physical Volume(perineurium_index) = {perineurium_segments[]};
Physical Volume(epineurium_index) = {epineurium_segments[]};
Physical Volume(encapsulation_tissue_index) = {encapsulation_tissue_segments[]};
Physical Volume(saline_index) = {saline_segments[]};
Physical Volume(cuff_index) = {cuff_segments[]};
Point(2070) = {0.4, 0.9, 0, 1.0};
Point(2071) = {0.5, 0.9, 0, 1.0};
Point(2072) = {0.4, 0.8, 0, 1.0};
Point(2073) = {0.5, 0.8, 0, 1.0};
Delete {
  Point{2070};
}
Delete {
  Point{2072};
}
Delete {
  Point{2073};
}
Delete {
  Point{2071};
}
Point(2073) = {0.6973, 0.3146, -25, 1.0};
Coherence;
