[Gmsh] orient ruled surfaces

[Christophe Geuzaine]

This (undocumented...) API will actually be remove quite soon, replaced by a much simpler, integer-based API that is very close to what is done in .geo files.

If you feel adventurous you can give it a try: cf. Geo/GModelIO_Geo.h (for the built-in CAD kernel) and Geo/GModelIO_OCC.h (for the OpenCASCADE kernel).

Christophe

> On 1 Jun 2017, at 12:29, Antonio Cervone <ant.cervone at gmail.com> wrote:
> 
> Hello,
> when trying to use gmsh library API, I was not able to create ruled surfaces when the edges are not properly oriented. At this link
> 
> https://gist.github.com/capitalaslash/47c04578b8d34f42df5ff892b577b5be
> 
> you can see an example that fails without the patch attached there. Is it the correct way to do it?
> Thanks,
> 
> Antonio
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info