[Gmsh] remeshing an stl file using the gmsh API

[Lanz Natanael]

Hello,

We are developing an application in Windows in which an stl file, representing the a surface mesh of a certain geometry, is computed. Out of this stl information a volume mesh shall be computed using gmsh.

To integrate gmsh in our application I successfully compiled the gmsh library an linked it to our application.

What I need to do now is, to convert the remeshing steps shown in the attached .geo file to the C++ gmsh API. Can you give me any hint or example how this can be solved? I also attached the corresponding stl surface mesh. Any help would be very appreciated! So thank you in advance!!

Best regards,

Natanael Lanz
MSc Masch. Ing. ETH

IWF ETH Zürich
Technoparkstrasse 1
PFA E82
CH-8005 Zürich

lanz at iwf.mavt.ethz.ch<mailto:lanz at iwf.mavt.ethz.ch>
www.iwf.mavt.ethz.ch
Tel. +41 44 6325714
Mob. +41 79 5862958


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20151112/d7fea2d4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: facegear_example1.stl
Type: application/vnd.ms-pki.stl
Size: 3540039 bytes
Desc: facegear_example1.stl
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20151112/d7fea2d4/attachment-0001.stl>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: facegear_mesh.geo
Type: application/octet-stream
Size: 1419 bytes
Desc: facegear_mesh.geo
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20151112/d7fea2d4/attachment-0001.geo>