[Gmsh] Gmsh and MED-3.x
Christophe Geuzaine
cgeuzaine at ulg.ac.be
Wed Sep 21 10:58:25 CEST 2011
On 21 Sep 2011, at 08:50, jean pierre aubry wrote:
> hello
>
> after the good news, the bad ones
> i have just tried compiling the source with cmake and i get the
> following error at an early stage
>
> [ 24%] Building CXX object
> CMakeFiles/gmsh.dir/Post/PViewDataGModelIO.cpp.o /dedalus/downloaded/gmsh-2.5.1-svn-20110921-source/Post/PViewDataGModelIO.cpp:
> In member function ‘virtual bool
> PViewDataGModel::writeMED(std::string)’: /dedalus/downloaded/gmsh-2.5.1-svn-20110921-source/Post/PViewDataGModelIO.cpp:673:28:
> error: ‘meshname’ was not declared in this scope make[2]: ***
> [CMakeFiles/gmsh.dir/Post/PViewDataGModelIO.cpp.o] Erreur 1 make[1]:
> *** [CMakeFiles/gmsh.dir/all] Erreur 2 make: *** [all] Erreur 2
>
> i must point point out that this is the first time i compile gmsh from
> scartch and my experience in the matter is rather thin
>
Hi Jean-Pierre - Can you "svn up" and try again?
> jean pierre aubry
>
>
>
>
> Le Wed, 21 Sep 2011 07:26:49 +0200,
> Christophe Geuzaine <cgeuzaine at ulg.ac.be> a écrit :
>
>>
>> Hi all,
>>
>> Good news: the latest SVN version now supports MED3. At the moment
>> you'll have to recompile the code from source (the nightly builds are
>> still using MED2).
>>
>> Can Code_Aster users send me feedback? If it's positive I'll (try to)
>> upgrade the build machines.
>>
>> Christophe
>>
>>
>> On 15 Sep 2011, at 05:45, jean pierre aubry wrote:
>>
>>> hello all
>>>
>>> this is good news, but i already knew it
>>> the problem is Aster version 11.x will only output med.3 file
>>> which cannot be read at the moment by Gmsh
>>>
>>> so 2 wishes
>>> Gmsh should be able to read med.3 as outputed from Aster
>>> or there should be a translator from med.3 to med.2
>>> to be able to read med.3 Psotpro files
>>>
>>> this would be very useful as Gmsh is at the time the ONLY tool to
>>> display WITHOUT ERRORS "ELNO" type fields for 1D elements
>>>
>>> jean pierre aubry
>>>
>>>
>>>
>>>
>>> Le Mon, 12 Sep 2011 09:52:49 +0200,
>>> Nicolas TARDIEU <nicolas.tardieu at edf.fr> a écrit :
>>>
>>>> Hi Christophe.
>>>>
>>>> I confirm that MED3 can read MED2 files.
>>>>
>>>> Nicolas
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Nicolas TARDIEU
>>>> Ing. Chercheur
>>>> EDF - R&D Dpt AMA
>>>>
>>>> nicolas.tardieu at edf.fr
>>>> Tél. : 01 47 65 39 05
>>>>
>>>> Un geste simple pour l'environnement, n'imprimez ce message que si
>>>> vous en avez l'utilité.
>>>>
>>>>
>>>>
>>>>
>>>> cgeuzaine at ulg.ac.be
>>>> 10/09/2011 08:29
>>>>
>>>> A
>>>> jeanpierre at lamachine.fr
>>>> cc
>>>> gmsh at geuz.org, Nicolas.Tardieu at edf.fr
>>>> Objet
>>>> Re: [Gmsh] Gmsh and MED-3.x
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 06 Sep 2011, at 14:25, jean pierre aubry wrote:
>>>>
>>>>> hello
>>>>>
>>>>> will the next version of Gmsh be able
>>>>> 1- to read med-3.x file, (for Postpro results of Code_Aster)?
>>>>> 2- write med-3.x file, (for mesh input of the same)?
>>>>> and if yes, when?
>>>>>
>>>>
>>>> Hi Jean-Pierre,
>>>>
>>>> We definitely plan to, but we (at least I) haven't looked at the
>>>> difficulty of switching to the new version of the MED library.
>>>>
>>>> Is there a document somewhere explaining the API differences
>>>> between med-2 and med-3? Is it possible to keep med-2
>>>> compatibility when switching to med-3?
>>>>
>>>> CC'ing Nicolas Tardieu.
>>>>
>>>> Christophe
>>>>
>>>>
>>>>> the 11.xx version of Code_Aster can read med-2.x and med-3.x files
>>>>> but output only med-3.x
>>>>> this is very annoying as there is not med-3.x -> med-2.x
>>>>> translator
>>>>>
>>>>> some strategy of the "meshing -> calculation -> post processing",
>>>>> with which tools is highly dependent of this answer regarding Gmsh
>>>>> ability
>>>>>
>>>>> thanks in advance
>>>>>
>>>>> jean pierre aubry
>>>>>
>>>>> _______________________________________________
>>>>> gmsh mailing list
>>>>> gmsh at geuz.org
>>>>> http://www.geuz.org/mailman/listinfo/gmsh
>>>>
>>>
>>
>
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine