[Gmsh] Set order Option in the Mesh menu
Jean-François Remacle
jean-francois.remacle at uclouvain.be
Sun Apr 24 12:31:21 CEST 2011
Le 20 avr. 2011 à 16:27, GERALD sophie DSNA/CC a écrit :
> Good afternoon,
>
> I work with the "gmsh-2.5.0-Linux" version of your software.
>
> I have written my file.geo in the aim to create a 2D unstructured mesh around an airfoil (c.f. the attachment). I have 2 Plane Surfaces that touch. After loading the .geo and create my 2D-mesh I would like to use the "Set Order" option in the "Mesh" menu.
> 1- Is it possible to obtain a different order in each surface? That is to say to have a 6-node (or 9) triangle in the first surface (number 1000) and a 3-node (or 6) triangle in the second one (number 1001)?
>
no, this is not something we have implemented. Yet, this is quite simple in principle to generate the highest
order in the geometry and to post-process the mesh and reduce locally the order of the mesh
> 2- How can I get the number of triangles resulting from the mesh for each surface in the message control? Indeed I didn't succeed with the Mesh.NbTriangles=1 at the end of my .geo.
>
You can use a python script that would look like
g = GModel ()
g.load('yourmesh.msh')
face = g.getFaceByTag(1000)
print face.getNumMeshElements()
> Many thank in advance for your answer.
> Best regards,
>
> --
> Sophie Gérald
> PhD student
> http://www.onera.fr/
> Tél. +331 467 33919
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
------------------------------------------------------------------
Prof. Jean-Francois Remacle
Universite catholique de Louvain (UCL)
Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering
Institute of Mechanics, Materials and Civil Engineering (iMMC)
Center for Systems Engineering and Applied Mechanics (CESAME)
Tel : +32-10-472352 -- Mobile : +32-473-909930
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20110424/c65ddc81/attachment.html>