[Gmsh] Meshing an extruded object
David Colignon
David.Colignon at ulg.ac.be
Mon Aug 10 11:53:57 CEST 2009
Silver, Barry wrote:
> Hi David
>
> Thanks for the reply.
>
> Here is the contents of the .geo file . I want to extrude this object by
> rotation
Axis, angle ?
and then mesh it both externally and internally.
>
> Point(1) = {0, 0, 0};
> Point(2) = {1, 0, 0};
> Point(3) = {-1, 0, 0};
> Point(4) = {0, 1, 0};
> Point(5) = {0, -1, 0};
> Circle(1) = {4, 1, 3};
> Circle(2) = {4, 1, 2};
> Line(3) = {3, 5};
> Line(4) = {5, 2};
What Extrude command have you tried so far ?
> Please advise on the most appropriate/effecient way to this .
Could you first read the tutorials t2.geo and t3.geo ?
http://www.geuz.org/gmsh/doc/texinfo/gmsh-full.html#SEC65
http://www.geuz.org/gmsh/doc/texinfo/gmsh-full.html#SEC66
also in gmsh/tutorials/
and see gmsh/demos/cone.geo
gmsh/demos/pripyrtet.geo
Cheers,
Dave
>
> Cheers
>
> Barry
>
> ------------------------------------------------------------------------
> *From:* David Colignon [mailto:David.Colignon at ulg.ac.be]
> *Sent:* Mon 8/10/2009 07:28
> *To:* Silver, Barry
> *Cc:* gmsh at geuz.org
> *Subject:* Re: [Gmsh] Meshing an extruded object
>
> Hi Barry,
>
> can you send us your .geo file ?
>
> Cheers,
>
> Dave
>
> --
> David Colignon, Ph.D.
> Collaborateur Logistique du F.R.S.-FNRS
> CÉCI - Consortium des Équipements de Calcul Intensif
> ACE - Applied & Computational Electromagnetics
> Sart-Tilman B28
> Université de Liège
> 4000 Liège - BELGIQUE
> Tél: +32 (0)4 366 37 32
> Fax: +32 (0)4 366 29 10
> WWW: http://hpc.montefiore.ulg.ac.be/
> Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
>
>
>
> Silver, Barry wrote:
> > Hi
> >
> > I am novice and may be asking a simple question. Apologies in advance.
> >
> > I have drawn a 2d object which is tear-drop shaped and I have extruded ,
> > via rotation, this object about 4 times to obtain a 3d object. The
> > object is shaped like a lightbulb
> >
> > When I try and mesh the newly created 3d object, Gmsh crashes ...what I
> > am doing wrong ?
> >
> > Regards
> >
> > Barry
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > gmsh mailing list
> > gmsh at geuz.org
> > http://www.geuz.org/mailman/listinfo/gmsh
>