[Gmsh] Gmsh - Physical Groups - Defining all surfaces at once ?

Christophe Geuzaine cgeuzaine at ulg.ac.be
Wed Jun 3 20:41:31 CEST 2009


Räbiger wrote:
> Dear Mr. Geuzaine and Mr. Remacle,
> 
> I am using Gmsh ( only the GUI ) in combination with Engrid and Openfoam.
> 
> For a well import of Gmsh data into Engrid, I have to define physical 
> 
> groups via ... Geometry / Physical Groups / Add / Surface ...
> 
> but I have to select each single surface. For complex geometries
> 
> with perhaps 100 different surfaces or more it is a lot of work.
> 
> Do you have an idea, how I can select in the GUI all surfaces at once ?
> 
> Is there a command in the menu or a shortcut, which I could not found ?
> 
> Do you have an idea or a tipp ? Thanks a lot in advance !!!
> 

Use "ctrl+mouse click" : this will start a rectangular selection


> Yours sincerely,
> 
> Klaus Räbiger
>  -- 
> LEISTRITZ Pumpen GmbH
> Markgrafenstr. 29-39, D-90459 Nuernberg
> Telefon/Phone: +49 911 4306-0  Fax: +49 911 4306-439
> Internet: www.leistritz.com
> 
> Geschaeftsfuehrung/Managing Directors:
> Dipl.-Ing. Joerg Narewski
> Dipl.-Ing. Rolf Quast
> Dipl.-Ing. Michael Schauerte
> Dipl.-Ing. Friedrich Sippel
> 
> Sitz der Gesellschaft/Registered Office: Nuernberg
> Handelsregister/Commercial Register: HRB 17819, Registergericht Nuernberg
> USt-IdNr./VAT-No.: DE813089359  St.-Nr.: 241/115/90148
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
> 
> 


-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine