[Gmsh] OpenCascade 6.3.0 + Ubuntu 8.10 compile
Christophe Geuzaine
cgeuzaine at ulg.ac.be
Thu Mar 12 21:37:30 CET 2009
William Hunter wrote:
> Hi Gmsh users;
>
> Just to let those know who'd like to compile Gmsh 2.3.0 with
> OpenCascade support on ubuntu 8.10, the instructions in README.occ is
> correct except that the following didn't work for me, maybe understood
> incorrectly (copied from README.occ):
>
> and copy config.h and the <OpenCascade dir>/ros/inc/ subdirectory
> to /usr/local/opencascade (This is the same as a doing a partial
> 'make install')
>
> Perhaps (?) it should be
>
> and copy the <OpenCascade dir>/ros/inc subdirectory
> to /usr/local/opencascade/ Then copy config.h to
> /usr/local/opencascade/inc/
>
> Anyway, the above worked for me. You should therefore only have
> bin, inc and lib
> directories in usr/local/opencascade, with config.h in ...cascade/inc
>
Hi William - Indeed we never know how Open Cascade is supposed to be
installed... Is the
opencascade
opencascade/bin
opencascade/inc
opencascade/lib
hierarchy the official one?
> --
>
> Before you compile Gmsh, do
>
> $ sudo apt-get build-dep gmsh
>
> and then follow the rest of the instructions in README.occ Compiling
> from source will also get rid of the ugly fonts under Ubuntu if you
> use the downloaded binary.
>
> Cheers,
> William
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>
>
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine