[Gmsh] dxf or other 2D import?

[Christophe Geuzaine]

Zenker, Dr. Matthias wrote:
> Thank you for the info.
> Since I have no C/C++ compiler on my system (Windoze XP SP2): Is there a binary available?
> Are there plans to incorporate the converter into gmsh?

No, this converter is very limited (it only translates points and 
curves). It can be useful to get the main features of an autocad file, 
but you'll have to fix the sketch by hand.

At the moment I think your best bet is still to export/import STEP.


> The link in the description is unfortunately dead.
> 
> Matthias
> 
>> -----Original Message-----
>> From: David Colignon [mailto:David.Colignon at ulg.ac.be] 
>> Sent: Wednesday, January 28, 2009 1:24 PM
>> To: Zenker, Dr. Matthias
>> Cc: gmsh at geuz.org
>> Subject: Re: [Gmsh] dxf or other 2D import?
>>
>> Hi Matthias,
>>
>> we have a very basic dxf to geo converter in 
>> utils/converters/autocad/dxf2geo.cpp :
>>
>> ...
>> ...
>> // This is a simple AutoCAD DXF to Gmsh GEO Data File 
>> Converter // // It was created from the AutoCAD DXF file to 
>> DKB data file converter // written and placed in the public 
>> domain 8/13/90 by Aaron // A. Collins 
>> (http://www.sdsc.edu/~mjb/mae152/dxf.spec.txt).
>> //
>> // It parses a limited, but useful, subset of the AutoCAD DXF 
>> file // format. No effort has been made to handle the 
>> complete range of // possible DXF opcodes and commands.
>> ...
>> ...
>>
>> Cheers,
>>
>> Dave
>>
>>
>> --
>> David Colignon, Ph.D.
>> Collaborateur Logistique du F.R.S.-FNRS
>> CÉCI - Consortium des Équipements de Calcul Intensif ACE - 
>> Applied & Computational Electromagnetics Sart-Tilman B28 
>> Université de Liège 4000 Liège - BELGIQUE
>> Tél: +32 (0)4 366 37 32
>> Fax: +32 (0)4 366 29 10
>> WWW:    http://hpc.montefiore.ulg.ac.be/
>> Agenda: 
>> http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
>>
>>
>>
>> Zenker, Dr. Matthias wrote:
>>> Hi,
>>>
>>> I need to import 2D data generated as cuts from a 3D model in 
>>> SolidWorks. One possibility would be to define a cut in 
>> SolidWorks and 
>>> export it as dxf (AutoCAD format). But it seems like gmsh 
>> is not able to 
>>> read dxf. Is there something I am missing (I just tried 
>> File->Open in 
>>> gmsh, it gave me a an error message)? Or what would be the best 
>>> (quickest) way to get the cut into gmsh? Is there any 2D 
>> vector format 
>>> it can read?
>>>
>>> The way I have done it before is to take a slice instead of a cut, 
>>> export it to STEP format, import it into gmsh and delete 
>> manually all 
>>> volumes, surfaces, lines and points in the 3rd dimension, 
>> which can be 
>>> very tedious for complex geometries.
>>>
>>> Any suggestions would be welcome.
>>>
>>> BTW, is there a complete list of all formats gmsh can read 
>> and write? I 
>>> have not found it in the manual, but I may have overlooked it...
>>>
>>> Thanks,
>>>
>>> Matthias
>>>
>>> ----------------------------------------------------------------
>>> ERBE Elektromedizin GmbH
>>> Dr.rer.nat. Matthias Zenker
>>> Dipl. Phys.
>>> Grundlagenentwicklung Technologie
>>> Waldhoernlestrasse 17
>>> 72072 Tuebingen
>>> Phone + 49 7071 - 755 226
>>> Fax + 49 7071 - 755 5226
>>> _mailto:Matthias.Zenker at ERBE-med.de_
>>> _www.ERBE-med.de_ <file://www.ERBE-med.de>
>>> ----------------------------------------------------------------
>>>
>>>
>>>
>>>   	  	 
>>>
>>> ERBE Elektromedizin GmbH
>>> Firmensitz: 72072 Tuebingen
>>> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
>>> Registergericht: Stuttgart HRB 380137
>>>
>>>
>>>
>>>
>> --------------------------------------------------------------
>> ----------
>>> _______________________________________________
>>> gmsh mailing list
>>> gmsh at geuz.org
>>> http://www.geuz.org/mailman/listinfo/gmsh
>>
> 
> _____________________________________________________________________
> ERBE Elektromedizin GmbH
> Firmensitz: 72072 Tuebingen
> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> Registergericht: Stuttgart HRB 380137
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
> 
> 


-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine