[Gmsh] dxf or other 2D import?
David Colignon
David.Colignon at ulg.ac.be
Wed Jan 28 13:24:18 CET 2009
Hi Matthias,
we have a very basic dxf to geo converter in utils/converters/autocad/dxf2geo.cpp :
...
...
// This is a simple AutoCAD DXF to Gmsh GEO Data File Converter
//
// It was created from the AutoCAD DXF file to DKB data file converter
// written and placed in the public domain 8/13/90 by Aaron
// A. Collins (http://www.sdsc.edu/~mjb/mae152/dxf.spec.txt).
//
// It parses a limited, but useful, subset of the AutoCAD DXF file
// format. No effort has been made to handle the complete range of
// possible DXF opcodes and commands.
...
...
Cheers,
Dave
--
David Colignon, Ph.D.
Collaborateur Logistique du F.R.S.-FNRS
CÉCI - Consortium des Équipements de Calcul Intensif
ACE - Applied & Computational Electromagnetics
Sart-Tilman B28
Université de Liège
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
WWW: http://hpc.montefiore.ulg.ac.be/
Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
Zenker, Dr. Matthias wrote:
> Hi,
>
> I need to import 2D data generated as cuts from a 3D model in
> SolidWorks. One possibility would be to define a cut in SolidWorks and
> export it as dxf (AutoCAD format). But it seems like gmsh is not able to
> read dxf. Is there something I am missing (I just tried File->Open in
> gmsh, it gave me a an error message)? Or what would be the best
> (quickest) way to get the cut into gmsh? Is there any 2D vector format
> it can read?
>
> The way I have done it before is to take a slice instead of a cut,
> export it to STEP format, import it into gmsh and delete manually all
> volumes, surfaces, lines and points in the 3rd dimension, which can be
> very tedious for complex geometries.
>
> Any suggestions would be welcome.
>
> BTW, is there a complete list of all formats gmsh can read and write? I
> have not found it in the manual, but I may have overlooked it...
>
> Thanks,
>
> Matthias
>
> ----------------------------------------------------------------
> ERBE Elektromedizin GmbH
> Dr.rer.nat. Matthias Zenker
> Dipl. Phys.
> Grundlagenentwicklung Technologie
> Waldhoernlestrasse 17
> 72072 Tuebingen
> Phone + 49 7071 - 755 226
> Fax + 49 7071 - 755 5226
> _mailto:Matthias.Zenker at ERBE-med.de_
> _www.ERBE-med.de_ <file://www.ERBE-med.de>
> ----------------------------------------------------------------
>
>
>
>
>
> ERBE Elektromedizin GmbH
> Firmensitz: 72072 Tuebingen
> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> Registergericht: Stuttgart HRB 380137
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh