[Gmsh] not multiply connected
Christophe Geuzaine
cgeuzaine at ulg.ac.be
Wed Apr 4 14:14:27 CEST 2007
Wern Lennart wrote:
> Dear Gmsh-user
>
> I am a new user of gmsh and I need some assistance.
>
> I have made a very simple geometry with two volumes that I can mesh
> without any problems, see attached file.
>
> I want to use my mesh in OpenFOAM and I therfor convert it. In the
> converting log I get text like the below:
>
> It seems like the two volumes are not connected. How can I connect them?
> Please help !!!
The way you generated the volumes, they are indeed not connected (you
extruded the surfaces by 2 different heights).
Attached is a version of your geometry that connects the volumes.
>
> ------------------------------
> checkCoords : points 1142 and 492 with coordinates:(250 343.75 70) and
> (250 343.75 70)
> are relatively close to each other. This might be correct in case of
> e.g. baffles.
> checkCoords : points 491 and 1141 with coordinates:(250 343.75 80) and
> (250 343.75 80)
> are relatively close to each other. This might be correct in case of
> e.g. baffles.
> checkCoords : points 490 and 1140 with coordinates:(250 343.75 90) and
> (250 343.75 90)
> are relatively close to each other. This might be correct in case of
> e.g. baffles.
> checkCoords : points 488 and 192 with coordinates:(250 375 20) and (250
> 375 20)
> are relatively close to each other. This might be correct in case of
> e.g. baffles.
>
> patch9 146 156 ok (not multiply connected)
> patch11 145 155 ok (not multiply connected)
> patch33 146 156 ok (not multiply connected)
> patch55 145 155 ok (not multiply connected)
> ------------------------------
>
>
> Regards,
>
> Lennart Wern
> SMHI
> Swedish Meteorological and Hydrological Institute
> SE-601 76 NORRKÖPING
> Sweden
>
> Visiting address: Folkborgsvägen 1
> Email: lennart.wern at smhi.se
> Phone: +46 11 495 81 49
> Fax: +46 11 495 82 50
>
>
>
>
> <<test_1.geo>>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: test_2.geo
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20070404/003b83a5/attachment.geo>