[Gmsh] To mesh or not to mesh.
Christophe Geuzaine
cgeuzaine at ulg.ac.be
Thu Mar 8 10:22:21 CET 2007
Cécile Giorla wrote:
> Hi!
> I have defined a volume as beeing a big volume with an volume's hole
> inside, this is OK. Next, I want to mesh only this volume, and not the
> hole inside. But as my hole is defined as a volume, it seems to be
> meshed anyway. Is there an option to tell GMSH not to mesh this hole volume?
> Thank you.
Hi Cecile - just don't define the small volume inside: the definition of
the big volume outside only relies on a "surface loop" for the hole--not
the definition of a volume. See the attached example.
> Cecile Giorla.
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>
>
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: sphere_with_hole.geo
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20070308/bb3ff5da/attachment.geo>