[Gmsh] Epaisseur de paroi et maillage (message in english and french)
Gaétan GREGOIRE
g.gregoire.atlantis at groupeatlantis.com
Wed Nov 23 14:56:03 CET 2005
Bonjour à tous.
Lorsque j'utilise ce fichier, le maillage ne marche pas en dessous d'une certaine épaisseur de paroi :
* Si e=0.02 et e2=0.015, le maillage marche très bien
* Si e=0.002 et e2=0.0015, GMSH plante et se ferme.
Quelqu'un peut-il m'expliquer ?
Merci d'avance. Cordialement,
Hi all.
When I use this geometry, I'm unable to mesh the volume with some parameter values:
* With e=0.02 and e2=0.015, everything is ok
* With e=0.002 and e2=0.0015, GMSH crash and close itself.
Can anybody explain that to me?
Thank you by advance. Best regards,
//////////////////////////////////////////////////////////////
// Maillage du panneau + jb force - GMSH version 1.2
//////////////////////////////////////////////////////////////
// Variables
//////////////////////////////////////////////////////////////
// Espace avant commencer
Rint= 0;
// Hauteur du panneau
H= 1.06;
// Largeur du panneau béton
L= 1;
// Epaisseur du panneau béton
e= 0.002;
// Débord
D= 0.078;
// hauteur fixation - jambe de force
Lf1= 0.760;
//Largeur de fixation - jambe de force
Lf2= 0.450;
// diamètre JdF
D2= 0.05;
// Epaisseur JdF
e2= 0.0015;
// Distance fond du panneau/fixation JdF
H2=0.03;
// Points
//////////////////////////////////////////////////////////////
Point(1) = {Rint,0,-L/2,1};
Point(2) = {Rint,0,L/2,1};
Point(3) = {Rint,H-e,L/2,1};
Point(4) = {Rint,H-e,-L/2,1};
Point(5) = {Rint+e,e,-L/2,1};
Point(6) = {Rint+e,e,L/2,1};
Point(7) = {Rint+e,H-e,L/2,1};
Point(8) = {Rint+e,H-e,-L/2,1};
Point(9) = {Rint+e,e,-e,1};
Point(10) = {Rint+e,e,e,1};
Point(11) = {Rint+e,H-e,e,1};
Point(12) = {Rint+e,H-e,-e,1};
Point(13) = {Rint+D,e,-e,1};
Point(14) = {Rint+D,e,e,1};
Point(15) = {Rint+D,H-e,e,1};
Point(16) = {Rint+D,H-e,-e,1};
Point(17) = {Rint+D,H-e,-L/2,1};
Point(18) = {Rint+D,H-e,L/2,1};
Point(19) = {Rint+D,H,-L/2,1};
Point(20) = {Rint+D,H,L/2,1};
Point(21) = {Rint,H,-L/2,1};
Point(22) = {Rint,H,L/2,1};
Point(23) = {Rint+D,0,-L/2,1};
Point(24) = {Rint+D,0,L/2,1};
Point(25) = {Rint+D,e,-L/2,1};
Point(26) = {Rint+D,e,L/2,1};
Point(27) = {Rint+H2+Lf2-D2/2,0,e,1};
Point(28) = {Rint+H2+Lf2-D2/2,0,e+e2,1};
Point(29) = {Rint+H2+Lf2+D2/2,0,e,1};
Point(30) = {Rint+H2+Lf2+D2/2-e2,0,e+e2,1};
Point(31) = {Rint+H2,Lf1-D2/2,e,1};
Point(32) = {Rint+H2,Lf1-D2/2,e+e2,1};
Point(33) = {Rint+H2,Lf1+D2/2,e,1};
Point(34) = {Rint+H2,Lf1+D2/2-e2,e+e2,1};
Point(35) = {D,Lf1+D2/2-Lf1*(D-H2)/Lf2,e,1};
Point(36) = {D,Lf1-D2/2-Lf1*(D-H2)/Lf2,e,1};
Point(37) = {Rint+H2,Lf1+D2/2-e2,e+D2,1};
Point(38) = {Rint+H2,Lf1+D2/2,e+D2,1};
Point(39) = {Rint+H2+Lf2+D2/2,0,e+D2,1};
Point(40) = {Rint+H2+Lf2+D2/2-e2,0,e+D2,1};
// Lignes
//////////////////////////////////////////////////////////////
Line(1) = {1,23};
Line(2) = {5,9};
Line(3) = {24,2};
Line(4) = {2,1};
Line(5) = {1,21};
Line(6) = {21,22};
Line(7) = {22,20};
Line(8) = {20,18};
Line(9) = {18,7};
Line(10) = {7,6};
Line(11) = {19,17};
Line(12) = {17,8};
Line(13) = {8,5};
Line(14) = {6,10};
Line(15) = {10,14};
Line(17) = {13,9};
Line(18) = {13,16};
Line(19) = {16,12};
Line(20) = {12,9};
Line(21) = {14,36};
Line(22) = {15,11};
Line(23) = {2,22};
Line(24) = {10,11};
Line(25) = {21,19};
Line(26) = {8,12};
Line(27) = {7,11};
Line(28) = {17,16};
Line(29) = {19,20};
Line(30) = {23,24};
Line(31) = {23,25};
Line(32) = {25,13};
Line(33) = {24,26};
Line(34) = {6,26};
Line(35) = {5,25};
Line(37) = {15,18};
Line(39) = {14,26};
Line(40) = {27,29};
Line(42) = {30,28};
Line(43) = {28,27};
Line(44) = {33,31};
Line(46) = {32,34};
Line(48) = {29,35};
Line(49) = {27,36};
Line(50) = {30,34};
Line(51) = {28,32};
Line(52) = {33,35};
Line(53) = {31,36};
Line(54) = {36,35};
Line(55) = {35,15};
Line(56) = {31,32};
Line(57) = {34,37};
Line(58) = {37,38};
Line(59) = {38,33};
Line(60) = {29,39};
Line(61) = {39,40};
Line(62) = {40,30};
Line(64) = {38,39};
Line(65) = {37,40};
// Surfaces
//////////////////////////////////////////////////////////////
Line Loop(66) = {37,9,27,-22};
Plane Surface(67) = {66};
Line Loop(68) = {7,8,9,10,34,-33,3,23};
Plane Surface(69) = {68};
Line Loop(70) = {4,5,6,-23};
Plane Surface(71) = {70};
Line Loop(72) = {10,14,24,-27};
Plane Surface(73) = {72};
Line Loop(74) = {6,7,-29,-25};
Plane Surface(75) = {74};
Line Loop(76) = {26,-19,-28,12};
Plane Surface(77) = {76};
Line Loop(78) = {25,11,12,13,35,-31,-1,5};
Plane Surface(79) = {78};
Line Loop(80) = {2,-17,-32,-35};
Plane Surface(81) = {80};
Line Loop(82) = {15,39,-34,14};
Plane Surface(83) = {82};
Line Loop(84) = {18,19,20,-17};
Plane Surface(85) = {84};
Line Loop(86) = {8,-37,-55,-54,-21,39,-33,-30,31,32,18,-28,-11,29};
Plane Surface(87) = {86};
Line Loop(88) = {2,-20,-26,13};
Plane Surface(89) = {88};
Line Loop(90) = {22,-24,15,21,-53,-44,52,55};
Plane Surface(91) = {90};
Line Loop(92) = {4,1,30,3};
Plane Surface(93) = {92};
Line Loop(94) = {59,44,56,46,57,58};
Plane Surface(95) = {94};
Line Loop(96) = {42,43,40,60,61,62};
Plane Surface(97) = {96};
Line Loop(98) = {48,-54,-49,40};
Plane Surface(99) = {98};
Line Loop(100) = {52,-48,60,-64,59};
Plane Surface(101) = {100};
Line Loop(102) = {61,-65,58,64};
Plane Surface(103) = {102};
Line Loop(104) = {57,65,62,50};
Plane Surface(105) = {104};
Line Loop(106) = {42,51,46,-50};
Plane Surface(107) = {106};
Line Loop(108) = {56,-51,43,49,-53};
Plane Surface(109) = {108};
// Volume
//////////////////////////////////////////////////////////////
Surface Loop(110) = {93,-71,79,75,-69,87,67,73,-83,91,-109,95,-101,-99,97,-107,-105,-103,81,-89,-85,-77};
Volume(111) = {110};
// Svg des entités
//////////////////////////////////////////////////////////////
Physical Surface(1000) = {67};
Physical Surface(1001) = {69};
Physical Surface(1002) = {71};
Physical Surface(1003) = {73};
Physical Surface(1004) = {75};
Physical Surface(1005) = {77};
Physical Surface(1006) = {79};
Physical Surface(1007) = {81};
Physical Surface(1008) = {83};
Physical Surface(1009) = {85};
Physical Surface(1010) = {87};
Physical Surface(1011) = {89};
Physical Surface(1012) = {91};
Physical Surface(1013) = {93};
Physical Surface(1014) = {95};
Physical Surface(1015) = {97};
Physical Surface(1016) = {99};
Physical Surface(1017) = {101};
Physical Surface(1018) = {103};
Physical Surface(1019) = {105};
Physical Surface(1020) = {107};
Physical Surface(1021) = {109};
Physical Volume(2000) = {111};
// Génération du maillage
//////////////////////////////////////////////////////////////
Mesh.CharacteristicLengthFactor= 0.02;
Gaétan GREGOIRE
Responsable Recherche & Développement
-------------------------------------------------------------------------------------------
Groupe ATLANTIS
Parc d'activité du Baconnet
69700 Montagny - France
Tél/fax: +33 (0) 4 72 49 17 42
Mél: g.gregoire.atlantis at groupeatlantis.com
-------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20051123/1e69203c/attachment.html>