[Gmsh] bug

[remacle]

Eric Chamberland wrote:

> Bonjour!
>
> j'ai eu un bug...
>
> Error   : Surface recovery failed (send a bug report with the geo file 
> to <gmsh at geuz.org>!)
>
Celui la est bien mieux.


Point(1) = {0.0,0.0,0.0,1};
Point(2) = {0.5,0.0,0.5,1};
Point(3) = {-0.5,0.0,0.5,1};
Point(4) = {0,0.0,1,1};
Point(5) = {0,0,0.5,1};
Circle(1) = {2,5,1};
Circle(2) = {1,5,3};
Circle(3) = {3,5,4};
Circle(4) = {4,5,2};
Physical Line(5) = {1,2,3,4};
Line Loop(6) = {1,2,3,4};
Plane Surface(7) = {6};
Extrude Surface {7, {0.0,10,0}};
Surface Loop(30) = {20,-7,16,29,24,28};
Volume(31) = {30};
//Transfinite Volume{1} = {6,8,13,18,2,1,3,4};
//Transfinite Surface {29} = {6,8,13,18};
//Transfinite Surface {7} = {2,1,3,4};
//Transfinite Surface {16} = {8,6,2,1};
//Recombine Surface {29};


> voici mon fichier:
>
>
> Point(1) = {0.0,0.0,0.0,1};
> Point(2) = {0.5,0.0,0.5,1};
> Point(3) = {-0.5,0.0,0.5,1};
> Point(4) = {0,0.0,1,1};
> Point(5) = {0,0,0.5,1};
> Circle(1) = {2,5,1};
> Circle(2) = {1,5,3};
> Circle(3) = {3,5,4};
> Circle(4) = {4,5,2};
> Physical Line(5) = {1,2,3,4};
> Line Loop(6) = {1,2,3,4};
> Plane Surface(7) = {6};
> Extrude Surface {7, {0.0,10,0}};
> Surface Loop(30) = {20,-7,16,29,24,28};
> Volume(31) = {30};
> Transfinite Volume{1} = {6,8,13,18,2,1,3,4};
> Transfinite Surface {29} = {6,8,13,18};
> Transfinite Surface {7} = {2,1,3,4};
> Transfinite Surface {16} = {8,6,2,1};
> Recombine Surface {29};
>
> bon débugage!
>
> Eric
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>
>


-- 
Prof. Jean-François Remacle
Department of Civil Engineering
Center for Systems Engineering and Applied Mechanics
Université catholique de Louvain, Belgium
Tel : +32 10 472082
Fax : +32 10 472210