[Gmsh] Re: another problem, with the same project

[philippe carette]

I forgot to say that this project freezes with PC, when i 2D mesh.

I try with a cube, instead of a cylinder, and i get "noeuds orphelins" 
with all the cube, with Code Aster, a soft you know.
Tx for help.
I will prepare all the files, which give me a problem with merging, this 
week-end.
regards

philippe carette a écrit :

> re Hi,
> now, i get some problem with meshing the project : i get a big 
> problem, as far back as  the 2D meshing.
> tx for help.
>
>------------------------------------------------------------------------
>
>// General.Trackball = 0;
>// General.RotationCenterGravity = 0;
>// General.RotationCenterX = 0;
>// General.RotationCenterY = 0;
>// General.RotationCenterZ = 0;
>// General.RotationX = 10;
>// General.RotationY = 70;
>// General.TranslationZ = -525;
>
>// General.ZoomFactor = 2;
>
>
>lc = 5;
>lcMasse = 3;
>lcContact = 1.5;
>lcEdge = 1;
>
>
>Point(1) = {70.32,18.3,0.,lcMasse};
>Point(2) = {67.77,7.32,0.,lcMasse};
>Point(3) = {64.91,-5.25,0.,lc};
>Point(4) = {63.32,-11.77,0.,lc};
>Point(5) = {50.27,-16.07,0.,lcMasse};
>Point(6) = {36.11,2.86,0.,lcContact};
>Point(7) = {66.34,1.03,0.,lc};
>
>Line(1) = {1,2};
>Line(2) = {3,4};
>Line(3) = {4,5};
>
>
>Point(8) = {60.06,2.47,0.,lcMasse};
>Circle(5) = {2,7,8};
>Circle(6) = {8,7,3};
>
>
>Point(18) = {65.07,18.25,0.,lcMasse};
>Point(10) = {59.5,17.66,0.,lcMasse};
>Point(11) = {35.20,5.09,0.,lcContact};
>Point(12) = {49,15.59,0.,lcMasse};
>Point(13) = {41.86,13.51,0.,lcContact};
>Point(17) = {36.50,10.95,0.,lcContact};
>Point(14) = {35.20,9.50,0.,lcContact};
>Point(15) = {34.84,7,0.,lcContact};
>
>CatmullRom(7) = {6,11,15,14,17,13};
>CatmullRom(8) = {13,12,10,18,1};
>Line(9) = {5,6};
>
>
>Line Loop(11) = {5,6,2,3,8,9,7,1};
>Plane Surface(12) = {11};
>
>
>Extrude Surface {12, {0,0,-50}};
>Characteristic Length {21, 26, 30, 34, 38, 42, 43, 44, 45, 46, 50} = lc * 2;
>Characteristic Length {19, 51, 52, 53} = lc * 5;
>
>Surface Loop(226) = {49,12,25,29,33,37,41,45,54,53};
>Volume(227) = {226};
>
>Bande = 100;
>Physical Volume (Bande) = {227};
>Mouve = 110;
>Physical Surface(Mouve) = {12};
>Fond = 120;
>Physical Surface(Fond) = {54};
>SectionSym = 130;
>Physical Surface(SectionSym) = {54} ;
>
>Rayon = 30;
>XIni=-0.25;
>YHaut = 4;
>ZPress = 0.03;
>Point(89) = {52,0,ZPress,lcEdge};
>Point(90) = {52+Rayon,0,ZPress,lcEdge};
>Point(91) = {52, Rayon,ZPress,lcEdge};
>
>Circle(258) = {90,89,91};
>
>Extrude Line {258, {0,0,1}, {52,0,ZPress}, Pi/2};
>Extrude Line {259, {0,0,1}, {52,0,ZPress}, Pi/2};
>Extrude Line {263, {0,0,1}, {52,0,ZPress}, Pi/2};
>
>Line Loop(271) = {259,263,267,258};
>Plane Surface(272) = {271};
>Extrude Surface {272, {0,0,30}};
>
>Surface Loop(295) = {281,272,285,289,293,294};
>Volume(296) = {295};
>
>Bille = 200;
>Physical Volume (Bille) = {296};
>
>PeauBille=210;
>Physical Surface(PeauBille) = {272};
>  
>