/*****************************************************
 *
 *  Gmsh geo-file exported by Sketch-Up
 *
*****************************************************/

// Define characteristic length (lc)

lc = 0.5;

h=0.00;
General.Color.Text = White;

//Write 407 points

Point(392) = {2.978, 21.342, 0.000, lc};
Point(393) = {2.978, 3.012, 0.000, lc};
Point(394) = {6.058, 3.012, 0.000, lc};
Point(395) = {6.058, 21.342, 0.000, lc};
Point(396) = {6.058, 3.012, 6.030, lc};
Point(397) = {6.058, 21.342, 6.030, lc};
Point(398) = {2.978, 21.342, 6.030, lc};
Point(399) = {2.978, 3.012, 6.030, lc};
Point(400) = {6.058+h, 14.321, 3.818, lc};
Point(401) = {6.058+h, 14.321, 2.378, lc};
Point(402) = {6.058+h, 8.551, 2.378, lc};
Point(403) = {6.058+h, 8.551, 3.818, lc};
Point(404) = {14.548, 14.321, 3.818, lc};
Point(405) = {14.548, 14.321, 2.378, lc};
Point(406) = {14.548, 8.551, 3.818, lc};
Point(407) = {14.548, 8.551, 2.378, lc};
//Center of circle(s)

//Write 436 lines

Line(413) = {394, 395};
Line(414) = {393, 394};
Line(415) = {392, 393};
Line(416) = {395, 392};
Line(417) = {396, 397};
Line(418) = {397, 398};
Line(419) = {398, 399};
Line(420) = {399, 396};
Line(421) = {395, 397};
Line(422) = {394, 396};
Line(423) = {400, 401};
Line(424) = {401, 402};
Line(425) = {402, 403};
Line(426) = {403, 400};
Line(427) = {393, 399};
Line(428) = {392, 398};
Line(429) = {404, 405};
Line(430) = {406, 404};
Line(431) = {407, 406};
Line(432) = {405, 407};
Line(433) = {400, 404};
Line(434) = {401, 405};
Line(435) = {403, 406};
Line(436) = {402, 407};

//Write 36 Plane Surfaces

Line Loop(485) = {413,414,415,416};
Plane Surface(486) = {-485};

Line Loop(487) = {417,418,419,420};
Plane Surface(488) = {487};

Line Loop(509) = {425,426,423,424};
Plane Surface(510) = {509};

Line Loop(491) = {413,421,-417,-422};
Plane Surface(492) = {491,-509};
Line Loop(493) = {414,422,-420,-427};
Plane Surface(494) = {493};
Line Loop(495) = {415,427,-419,-428};
Plane Surface(496) = {495};
Line Loop(497) = {416,428,-418,-421};
Plane Surface(498) = {497};
Line Loop(499) = {-429,-430,-431,-432};
Plane Surface(500) = {499};
Line Loop(501) = {-423,433,429,-434};
Plane Surface(502) = {501};
Line Loop(503) = {-426,435,430,-433};
Plane Surface(504) = {503};
Line Loop(505) = {-425,436,431,-435};
Plane Surface(506) = {505};
Line Loop(507) = {-424,434,432,-436};
Plane Surface(508) = {507};

Surface Loop(1000) = {498,488,494,486,496,492,-510};
Volume(1001) = {1000};

Surface Loop(1002) = {500,502,504,506,508,510};
Volume(1003) = {1002};

//Line{425,426,423,424} In Surface{492};
//Surface{510} In Volume{1001};

Physical Surface(101)={496};
Physical Surface(102)={498,488,494,486,492,500,502,504,506,508};

Physical Volume(1001)={1001};
Physical Volume(1002)={1003};

View "comments" {
T2(10, 15, 0){ StrCat("File created on ", Today) };
};
