[Getdp] still facing discontinuities when using -restart option

[Joseph Frippiat]

Ruth,

yes, the discontinuities coincide with the restart: the value of the 
first point after a restart is not correct for the current.

For the simulation, I use a modified version of 
machine_magstadyn_a.pro.  The current is the current in the circuit 
connected to the stator coils (which is in fact another rotor...)

For the restart, I do
getdp model1 -restart -solve CoSimulation -bin -v 3
(the post-processing is called from the Resolution as it is done in the 
original machine_magstadyn_a.pro)

No point seems to be missing as one can see in the log :

end of restart 1:

...
Info    : Theta Time = 0.12008873 s (TimeStep 1094, DTime 0.00010795)
Info    : IterativeLoop converged (6 iterations, residual 6.57266e-07)
E n d   P r o c e s s i n g
Info    : Stopped (Tue Apr  3 13:17:21 2018, Wall = 77.2714s, CPU = 
261.174s, Mem = 38.8398Mb)

beginning of restart 2:

Info    : Started (Tue Apr  3 13:17:22 2018, Wall = 0.0200088s, CPU = 
0.055353s, Mem = 4.40234Mb)
...
P r e - P r o c e s s i n g . . .
Info    : System 1/3: 745 Dofs
Info    : System 2/3: 4 Dofs
Info    : System 3/3: 575 Dofs
E n d   P r e - P r o c e s s i n g
P r o c e s s i n g . . .
Info    : Theta Time = 0.12019546 s (TimeStep 1095, DTime 0.00010673)
Info    : IterativeLoop converged (5 iterations, residual 1.42442e-07)
...

Joseph

Le 3/04/2018 à 11:33, Ruth Vazquez Sabariego a écrit :
> Hi Joseph,
>
> Do the discontinuities coincide with the restart?
> How are you doing the post-processing for getting the current?
> Does it behave in the same way if you do post-pro straightaway or just 
> after?
>
> I mean
> getdp xxx.pro -restart -solve xxx -pos xxx
> OR
> getdp  xxx.pro -restart -solve xxx
> getdp xxx.pro -pos xxx
>
> The behaviour should be the same but it could be that we are missing a 
> time step…
> I do not use restart often but when I do I take the first option 
> without observing any particular weird behaviour.
>
> Best regards,
> Ruth
>
>
>
>> On 3 Apr 2018, at 01:29, Joseph Frippiat <joseph_frippiat at voo.be 
>> <mailto:joseph_frippiat at voo.be>> wrote:
>>
>> Hello,
>>
>> as one can see on the following picture, I get discontinuities each 
>> time I restart my calculations with the -restart option.
>>
>> There is surely something that I miss but I can't find it.
>>
>> Did someone else encouter this problem that could point me to a 
>> solution ?
>>
>> Thanks in advance,
>>
>> Joseph
>>
>> Here is the picture:
>>
>> <Figure 0.png>
>> _______________________________________________
>> getdp mailing list
>> getdp at onelab.info <mailto:getdp at onelab.info>
>> http://onelab.info/mailman/listinfo/getdp
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/getdp/attachments/20180403/97245935/attachment.html>