[Getdp] file was not generated ".res"

[Ruth V. Sabariego]

You are just doing the computation for the source field hs:

MagSta_hs_1

but if you have a look at the resolution, the solution is not saved (intermediate step), so you do not have a . res file.
The behaviour is thus normal.

If you want to check the source field, you should uncomment that line, but also use the correct post-processing for that formulation, Map_hs.


Select MagDyn_hphi as Resolution 
and Map_local as PostOperation.


Regards,
Ruth






--
Dr. Ir. Ruth V. Sabariego
University of Liege, Electrical Engineering & Computer Science, 
Applied & Computational Electromagnetics (ACE),
phone: +32-4-3663737 - fax: +32-4-3662910 - http://ace.montefiore.ulg.ac.be/



On 28 Oct 2011, at 23:52, Rodolfo wrote:

> Attached file
> 
> Best regards,
> 
> Rodolfo
> 
> 2011/10/24 Ruth V. Sabariego <r.sabariego at ulg.ac.be>
> Probably, you get that message because you try to get a post-processing without solving the problem.
> If you are running getdp from the command line, try:
> 
>  getdp CoilAboveACrack -solve MagDyn_hphi -pos
> 
> you will get the possible post-processing.
> 
> If you are running from Gmsh, click on:
> 1) pre
> 2) cal
> 3) pos
> 
> In the nightly build Gmsh, the interface has slightly changed. By default, -solve -pos are the selected options.
> 
> I've detected an error in the constraints of that problem. It has been corrected in the wiki:
> https://geuz.org/trac/getdp/wiki/MagnetoDynamics?version=6
> 
> Best regards,
> 
> --
> Dr. Ir. Ruth V. Sabariego
> University of Liege, Electrical Engineering & Computer Science,
> Applied & Computational Electromagnetics (ACE),
> phone: +32-4-3663737 - fax: +32-4-3662910 - http://ace.montefiore.ulg.ac.be/
> 
> 
> 
> On 19 Oct 2011, at 03:05, Rodolfo wrote:
> 
> > I copied the example from the Wiki: "Magnetodynamic example using the h-phi finite element formulation" as it is on the site, but when running getdp a message that the file was not generated ".res", what could be going wrong?
> >
> > att,
> >
> > Rodolfo
> > _______________________________________________
> > getdp mailing list
> > getdp at geuz.org
> > http://www.geuz.org/mailman/listinfo/getdp
> 
> 
> <running from Gmsh.docx>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/getdp/attachments/20111029/cf616635/attachment.html>